chain maintenance for indoor trainer bike
#1
Senior Member
Thread Starter
chain maintenance for indoor trainer bike
Silly question, but I was wondering, if I've been riding my bike indoors all winter, is there any reason to clean/lubricate it periodically? Clearly, I'm not very knowledgable on the workings of lubrication and the rate at which it wears off.
p.s. I know sweat can be a factor, but actually it turns out I don't sweat onto the chain and such really. Don't know if that's a consideration here.
p.s. I know sweat can be a factor, but actually it turns out I don't sweat onto the chain and such really. Don't know if that's a consideration here.
#2
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 38,545
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 139 Post(s)
Tagged: 1 Thread(s)
Quoted: 5703 Post(s)
Liked 2,432 Times
in
1,345 Posts
Silly question, but I was wondering, if I've been riding my bike indoors all winter, is there any reason to clean/lubricate it periodically? Clearly, I'm not very knowledgable on the workings of lubrication and the rate at which it wears off.
p.s. I know sweat can be a factor, but actually it turns out I don't sweat onto the chain and such really. Don't know if that's a consideration here.
p.s. I know sweat can be a factor, but actually it turns out I don't sweat onto the chain and such really. Don't know if that's a consideration here.
On the bright side, since dirt and weather aren't an issue, you can use any oil and wipe off the excess so it doesn't spatter. Even with the best oil your chain will still need relubrication at intervals. In machinery chain drives get lubricated constantly by drip systems that put a few drops on the chain every hour or so. You can't and shouldn't do that, nut neglect will increase wear indoors the same way as outdoors.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
#3
Senior Member
Thread Starter
Thanks for the guidance. I've got a few hundred miles on my hybrid since I got it tuned up, and currently riding 65-70 miles a week, so want to make sure I'm taking care of it right and remain proactive with maintenance.
#4
Senior Member
Most of the black crud is from metal wear inside the chain. https://www.sheldonbrown.com/brandt/chain-care.html
#5
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,095 Times
in
741 Posts
Or they run submerged in an oil bath at all times. Of course, an industrial chain drive is expected to last over 25,000 hours (3 years or more) while a bike chain that lasts 6000 miles only averages about 400 hours.