how to remove peeling decals
03-06-14, 09:04 AM
#1
Senior Member
Thread Starter
how to remove peeling decals
I guess my thread title says it. The bike at issue has peeling decals and it looks ugly. What is good for removing them?
03-06-14, 09:16 AM
#2
Senior Member
Depends if they were clear coated. In most cases, a plastic credit card or your fingernail will do. Then use Goo Gone to rub off the residual adhesive.
It might surprise you as being very easy. Take photos first, in case you want to find replacements later. You'll forget what they looked like.
imho.
It might surprise you as being very easy. Take photos first, in case you want to find replacements later. You'll forget what they looked like.
imho.
__________________
1959 Hilton Wrigley Connoisseur (my favorite!)
1963 Hetchins Mountain King
1971 Gitane Tour de France (original owner)
* 1971 Gitane Super Corsa (crashed)
* rebuilt as upright cruiser
1971 Gitane Super Corsa #2 (sweet replacement)
1980 Ritchey Road Touring (The Grail Bike)
1982 Tom Ritchey Everest
(replacing stolen 1981 TR Everest custom)
1982 Tom Ritchey McKinley (touring pickup truck)
1985 ALAN Record (Glued & Screwed. A gift.)
1959 Hilton Wrigley Connoisseur (my favorite!)
1963 Hetchins Mountain King
1971 Gitane Tour de France (original owner)
* 1971 Gitane Super Corsa (crashed)
* rebuilt as upright cruiser
1971 Gitane Super Corsa #2 (sweet replacement)
1980 Ritchey Road Touring (The Grail Bike)
1982 Tom Ritchey Everest
(replacing stolen 1981 TR Everest custom)
1982 Tom Ritchey McKinley (touring pickup truck)
1985 ALAN Record (Glued & Screwed. A gift.)
03-06-14, 09:32 AM
#3
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,362
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6219 Post(s)
Liked 4,218 Times
in
2,365 Posts
Remove as much of the decal as possible mechanically...i.e. pull off as much as you can. Then use Goof Off or Goo Gone. I've used the Goof Off and it does an amazing job. Use the liquid, get some nitrile gloves to protect your hands and use it outside. It's not terribly toxic based on the MSDS but it does have a strong irritating odor.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
03-06-14, 12:33 PM
#4
Banned
stickers on clear plastic , are different from water transfer Decals.
so 1st figure out what you have ..
the above suggestions are OK with self adhesive stickers .
so 1st figure out what you have ..
the above suggestions are OK with self adhesive stickers .
03-06-14, 04:05 PM
#5
Warehouse Monkey
Join Date: Jul 2008
Location: Lebanon Co., Pennsylvania
Posts: 1,604
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 305 Post(s)
Likes: 0
Liked 7 Times
in
2 Posts
I've used a pretty powerful heatgun with mixed success. My 2014 BMX bike came with decals I didn't care for, so within 10 minutes I had them removed with heat. However, I am repainting an older kid's bike and the decals are putting up more of a fight.
__________________
'10 Specialized Hardrock
'10 Specialized Hardrock
03-06-14, 05:12 PM
#6
Senior Member
Thread Starter
Remove as much of the decal as possible mechanically...i.e. pull off as much as you can. Then use Goof Off or Goo Gone. I've used the Goof Off and it does an amazing job. Use the liquid, get some nitrile gloves to protect your hands and use it outside. It's not terribly toxic based on the MSDS but it does have a strong irritating odor.
Depends if they were clear coated. In most cases, a plastic credit card or your fingernail will do. Then use Goo Gone to rub off the residual adhesive.
It might surprise you as being very easy. Take photos first, in case you want to find replacements later. You'll forget what they looked like.
imho.
It might surprise you as being very easy. Take photos first, in case you want to find replacements later. You'll forget what they looked like.
imho.
03-07-14, 12:59 PM
#8
Senior Member
Join Date: Dec 2009
Location: Houston, TX
Posts: 28,682
Bikes: 1990 Romic Reynolds 531 custom build, Merlin Works CR Ti custom build, super light Workswell 066 custom build
Mentioned: 109 Post(s)
Tagged: 1 Thread(s)
Quoted: 6556 Post(s)
Likes: 0
Liked 58 Times
in
36 Posts
After removing to layer sticker decals recently, I was able to get the residual glue off with some alcohol swabs (like you use to sterilize a medical injection site) and a little elbow grease. I think my wife's finger nail polish remover (acetone or ethyl acetate) would have been a better solvent, but she wasn't home and I couldn't find it.
03-07-14, 01:54 PM
#9
Senior Member
Join Date: Jan 2014
Location: Chicagoland
Posts: 74
Bikes: 70's Raleigh, 1974 Schwinn Le Tour, 2007 Giant Boulder SE, no longer have 1969 Schwinn Varsity, 1997 Giant Rincon
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Try a hair dryer, it will heat up the sticker enough to make it sticky again and won't damage the paint like a paint removing heat gun.
03-07-14, 02:24 PM
#10
Lover of Old Chrome Moly
Join Date: May 2011
Location: NW Minnesota
Posts: 2,949
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 143 Post(s)
Likes: 0
Liked 23 Times
in
17 Posts
3M and a few other companies make rubber wheels that go on a power drill or grinder that are specifically made for removing applied decals without damaging paint. You can get one at any store that sells auto finishing supplies. The good ones create enough friction to warm the decal loosening it and then strip it away in small bits. It can be a bit tedious working on the tubes of a bike as it was designed for use on cars and trucks with larger, flatter surfaces. Goof Off will work for those areas that can't be reached with the disc and for a final wipedown to remove residue.
If you remove decals on an older bike, the paint underneath may no longer match due to fading and etching of the surrounding paint. Sometimes you can fix this with rubbing compound followed by a polishing compound. Sometimes that isn't enough and you have to either live with it or redo the paint job.
If you remove decals on an older bike, the paint underneath may no longer match due to fading and etching of the surrounding paint. Sometimes you can fix this with rubbing compound followed by a polishing compound. Sometimes that isn't enough and you have to either live with it or redo the paint job.
03-07-14, 07:59 PM
#11
Senior Member
Thread Starter
03-08-14, 01:34 AM
#12
Banned.
Join Date: Jun 2010
Posts: 434
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 29 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
I'd try an orange-oil cleaner, such as De-Solv-It first. It has worked better than the petroleum-distillate products mentioned for me and isn't toxic. There's a lot of worthless stuff that contains just enough orange oil for scent, not enough to dissolve anything.
Thread
Thread Starter
Forum
Replies
Last Post
fillarji
Classic & Vintage
13
10-04-10 06:00 PM
