Is this safe?
#1
Senior Member
Thread Starter
Join Date: Nov 2003
Posts: 297
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Liked 0 Times
in
0 Posts
Is this safe?
I know it looks funky but I was given this frame and want to use the parts I have. It's a *bit* small (19.5" according to the frame) but not too uncomfortable. I'm concerned about the extra long fork tube with spacers. It's got that neck extention National Geographic thing going on-- even the frame color is National Geographic-like.... The seatpost (which came with the frame, a Thompson no less) is really long; no worries there.
#2
Senior Member
Join Date: Jul 2001
Posts: 1,392
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 140 Post(s)
Liked 0 Times
in
0 Posts
Looks more than a "bit" small if that is the setup you need to use to fit the bike. Keep the good parts and get a frame that is the correct size.
#3
Si Senior
Join Date: Nov 2004
Location: Naperville, Illinois
Posts: 2,669
Bikes: Too Numerous (not)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 23 Post(s)
Likes: 0
Liked 10 Times
in
8 Posts
How big are you? 19.5" isn't considered all that small for a mtb. If that seat/post adds another 16" and the cranks are 175mm, then you'd need to be almost a 40" inseam to work the crank. (right?)
#5
BikeJunky
Join Date: Jan 2004
Location: People's Republic of Bikeopolis
Posts: 171
Bikes: Santa Cruz Superlight, Redline Proline 24, Felt F45, Fuji Cross Pro, Specalized M2 Stumpjumper, Surly CrossCheck, Atala track
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Is your seatpost raised above the minimum insert line? Is that the steerer tube with 14 spacers? Depening on your weight and riding style, it might be safer if you leave the setup as is, without a chain. I really don't know, but I would wear a helmet! It certainly looks radical.
#6
Shimano Certified
One trick you can do to take spacers out of the front is to get a suspension fork. That would raise you a good bit.
#7
Banned.
Join Date: Oct 2004
Posts: 4,416
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Originally Posted by mtbikerinpa
One trick you can do to take spacers out of the front is to get a suspension fork. That would raise you a good bit.
I don't think there's a saftely problem, as long as the seat post is not above the min. insertion mark. It might not fit/ride like you want or would be ideal but...
#9
Senior Member
Thread Starter
Join Date: Nov 2003
Posts: 297
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Liked 0 Times
in
0 Posts
Originally Posted by dbg
How big are you? 19.5" isn't considered all that small for a mtb. If that seat/post adds another 16" and the cranks are 175mm, then you'd need to be almost a 40" inseam to work the crank. (right?)
There are 80mm worth of spacers there. I had to put the headset on (first time doing that and did it with my homemade headset press. I learned about it from this forum, thank you all) and the fork, wheels, pedals just to see how it would generally fit. I agree it's small but it *is* here (and did I mention free?)
The seatpost is not past the minimum insertion point-- it's 410mm. Pulling it out I didn't think it'd end...
Chuckie
#11
Shimano Certified
Originally Posted by BostonFixed
And screw up the handling.
I converted my formerly rigid race mtb from a 7 inch stem to 90mm stem and 80mm travel fork and it was the best handling mod I have ever done. Honestly, not to sound too blunt, but with a stem like that on there is there really handling to lose ?
If in doubt, see if you can snag a spare off a friend and trial fit it. To remove the suspension hieght is where the trouble can occur. Adding it will slacken the steering angle, which makes it stable and less twitchy. The degree of this slackening depends on the particular frame design, but from the looks of it you have the margin to play with.