Replacing Shimano Freehub
#1
Junior Member
Thread Starter
Join Date: Jun 2014
Location: Pennsylvania
Posts: 23
Bikes: Giant Roam 1, GT Tachyon, Diamondback Wildwood
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Replacing Shimano Freehub
Hi! First post, been lurking and reading for a while.
I need to replace my Shimano Freehub on my GT Tachyon. Its hanging up and grinding and probably about to fail. I've got about 3000 miles on it.
I've looked on Amazon and some other places on-line and see there are different Shimano hubs available.
How can I identify mine to get the right one? I don't see any numbers or markings on mine.
Can I upgrade to a better one like a Tiagra or Ultegra?
I can handle the repair but just want to get the right part.
Thanks for any help!
I need to replace my Shimano Freehub on my GT Tachyon. Its hanging up and grinding and probably about to fail. I've got about 3000 miles on it.
I've looked on Amazon and some other places on-line and see there are different Shimano hubs available.
How can I identify mine to get the right one? I don't see any numbers or markings on mine.
Can I upgrade to a better one like a Tiagra or Ultegra?
I can handle the repair but just want to get the right part.
Thanks for any help!
#2
Senior Member
Join Date: Oct 2007
Location: West Yorkshire, United Kingdom
Posts: 5,773
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 453 Post(s)
Liked 104 Times
in
87 Posts
You need the correct freehub for the hub, you can't upgrade this component on it's own, it need to fit with the rest of the parts to make the whole hub.
For the part number needed, you first need to ID the hub, what we don't know from the info supplied is what hub you have, is it a Shimano? (not just Shimano compatible?) If it is a Shimano hub, find the part number of the freehub via Shimano the number of the hub is printed on the center of the hub, either directly or on a metallic sticker. If it is another brand, the chance of getting spares is limited, and complete wheel replacement would probably be a cheaper option.
Regardless, for this issue, have you tried a LBS, they will be able to assist you rather than Amazon, who can't ID anything or give advise.
For the part number needed, you first need to ID the hub, what we don't know from the info supplied is what hub you have, is it a Shimano? (not just Shimano compatible?) If it is a Shimano hub, find the part number of the freehub via Shimano the number of the hub is printed on the center of the hub, either directly or on a metallic sticker. If it is another brand, the chance of getting spares is limited, and complete wheel replacement would probably be a cheaper option.
Regardless, for this issue, have you tried a LBS, they will be able to assist you rather than Amazon, who can't ID anything or give advise.
#3
Senior Member
Join Date: Sep 2004
Location: boston, ma
Posts: 2,896
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
shimano hubs are marked with brand and model number. are you sure you have a shimano branded hub? for an unbranded hub it is easier to get a new wheel than find parts
#5
Senior Member
Join Date: Feb 2004
Location: St Peters, Missouri
Posts: 30,225
Bikes: Catrike 559 I own some others but they don't get ridden very much.
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1572 Post(s)
Liked 642 Times
in
363 Posts
The part that sounds like you need is called a "freehub body". It's about a $30.00 part. Removal usually takes a 10mm Allen key. They come in 7-speed and 8+speed versions so, if you have a 7-speed now, it will simplify your life to replace it with the same. I've replaced a bunch of them but none for probably a decade. I never paid any attention to the group set the replacement came from and they all fit and worked.
__________________
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
#6
Really Old Senior Member
The part that sounds like you need is called a "freehub body". It's about a $30.00 part. Removal usually takes a 10mm Allen key. They come in 7-speed and 8+speed versions so, if you have a 7-speed now, it will simplify your life to replace it with the same. I've replaced a bunch of them but none for probably a decade. I never paid any attention to the group set the replacement came from and they all fit and worked.
#7
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,095 Times
in
741 Posts
Older Shimano freehub bodies were pretty much interchangeable with one problem. The bodies would fit on almost any hub but the cones, spacers and dust covers/ seals were often model specific. So if you get a different model replacement body, the current seals, etc, may not line up properly so you may have to improvise.
#8
Junior Member
Thread Starter
Join Date: Jun 2014
Location: Pennsylvania
Posts: 23
Bikes: Giant Roam 1, GT Tachyon, Diamondback Wildwood
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Yes, Its a 2012 model Tachyon 3 with 8 speed rear cassette bought in February 2013.
I've cleaned and lubed the bearings several times and am familiar with the disassembly.
Nothing on the hub shows Shimano or any numbers, but the bike shop says its a "Shimano" type. They have a whole replacement wheel set, less cassette, for $90. I may go that route but thought I could just get a replacement hub body if I could ID it since there's nothing wrong with the rest of it.
I'm not cheap but just getting the hub body will save me about $60.
Thanks.
I've cleaned and lubed the bearings several times and am familiar with the disassembly.
Nothing on the hub shows Shimano or any numbers, but the bike shop says its a "Shimano" type. They have a whole replacement wheel set, less cassette, for $90. I may go that route but thought I could just get a replacement hub body if I could ID it since there's nothing wrong with the rest of it.
I'm not cheap but just getting the hub body will save me about $60.
Thanks.
#9
Constant tinkerer
Sounds like it's a Shimano compatible hub not an actual Shimano hub. Probably a cheap one (that's why it's breaking.) If you can even find parts for this they will eventually fail too. I've never had a Shimano cassette hub fail, though I've heard of it happening before.
I'd recommend a wheel with a Shimano hub or rebuild your current wheel with a Shimano hub if the rim is worthwhile and the cost of rebuilding isn't too high (it might be if you pay a shop to do it.)
I'd recommend a wheel with a Shimano hub or rebuild your current wheel with a Shimano hub if the rim is worthwhile and the cost of rebuilding isn't too high (it might be if you pay a shop to do it.)
#10
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,625
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3868 Post(s)
Liked 2,560 Times
in
1,574 Posts
Sounds like it's a Shimano compatible hub not an actual Shimano hub. Probably a cheap one (that's why it's breaking.) If you can even find parts for this they will eventually fail too. I've never had a Shimano cassette hub fail, though I've heard of it happening before.
I'd recommend a wheel with a Shimano hub or rebuild your current wheel with a Shimano hub if the rim is worthwhile and the cost of rebuilding isn't too high (it might be if you pay a shop to do it.)
I'd recommend a wheel with a Shimano hub or rebuild your current wheel with a Shimano hub if the rim is worthwhile and the cost of rebuilding isn't too high (it might be if you pay a shop to do it.)
#11
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,095 Times
in
741 Posts
If the hub doesn't have Shimano's name and model number on it I would interpret that to mean it isn't a real Shimano hub but one that takes Shimano (or SRAM) cassettes, not replacement parts.
#12
Senior Member
Join Date: Sep 2004
Location: boston, ma
Posts: 2,896
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Yes, Its a 2012 model Tachyon 3 with 8 speed rear cassette bought in February 2013.
I've cleaned and lubed the bearings several times and am familiar with the disassembly.
Nothing on the hub shows Shimano or any numbers, but the bike shop says its a "Shimano" type. They have a whole replacement wheel set, less cassette, for $90. I may go that route but thought I could just get a replacement hub body if I could ID it since there's nothing wrong with the rest of it.
I'm not cheap but just getting the hub body will save me about $60.
Thanks.
I've cleaned and lubed the bearings several times and am familiar with the disassembly.
Nothing on the hub shows Shimano or any numbers, but the bike shop says its a "Shimano" type. They have a whole replacement wheel set, less cassette, for $90. I may go that route but thought I could just get a replacement hub body if I could ID it since there's nothing wrong with the rest of it.
I'm not cheap but just getting the hub body will save me about $60.
Thanks.
#13
Bicycle Repair Man !!!
Older Shimano freehub bodies were pretty much interchangeable with one problem. The bodies would fit on almost any hub but the cones, spacers and dust covers/ seals were often model specific. So if you get a different model replacement body, the current seals, etc, may not line up properly so you may have to improvise.