Generic pump head for Serfas floor pump?
07-29-14, 03:59 PM
#1
Senior Member
Thread Starter
Join Date: Aug 2005
Location: Spring Hill/Columbia, Tennessee
Posts: 61
Bikes: Cannondale R600 and Beater MTB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Generic pump head for Serfas floor pump?
Does anyone have a link for a pump head that would fit my Serfas floor pump. I used the original head for 8+ years and it was great from day one. It recently started slipping and would not stay on the presta stem. I ordered a replacement from Serfas. Not to put down Serfas but the new head is very hard to get on the valve stem, very difficult to remove, does not ‘click’ the stem to engage to fill, and finally broke the end off the valve of a tube. I have googled but I cannot find something that says it will fit the Serfas connector. Kindly - Don
07-29-14, 04:16 PM
#2
Senior Member
Join Date: Aug 2005
Location: Las Vegas, NV
Posts: 924
Bikes: '04 LeMond Buenos Aires, '82 Bianchi Nuova Racing, De Rosa SLX, Bridgestone MB-1, Guerciotti TSX, Torpado Aelle, LeMond Tourmalet 853, Bridgestone Radac
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 95 Post(s)
Liked 43 Times
in
33 Posts
I just went through a pump replacement (bought a Serfas). The one that died was a Topeak and I first tried a new head/chuck, but it wasn't the problem. Anyway, I bought this from Amazon (subsequently returned it) and it came with everything you need to put it on ANY brand pump -
https://www.amazon.com/Topeak-Twinhea...peak+pump+head
I had my Topeak with that head for 13 years; always worked great. In fact, I removed the hose & head for possible future use before I tossed the rest of the pump.
https://www.amazon.com/Topeak-Twinhea...peak+pump+head
I had my Topeak with that head for 13 years; always worked great. In fact, I removed the hose & head for possible future use before I tossed the rest of the pump.
07-29-14, 05:10 PM
#3
Banned
Silca Pompe per biciclette, accessori per bicicletta, Bicycle Pumps and accessories - Silca Pompe - dal 1917 No.30.0 the P/V head unscrews from the S/V one .. Ive use their pump with the 24.0 head for 30+ years..
