Nervex. help to identify
#1
Junior Member
Thread Starter
Join Date: Feb 2015
Posts: 24
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Nervex. help to identify
I found this Nervex frame. please help to identify and any idea of value?
Last edited by cambowide; 02-15-15 at 07:16 AM. Reason: adittional pic
#2
Senior Member
cambowide-
The frame is not Nervex, the lugs and BB are. The number sequence on your bottom bracket is the measurement in minutes and degrees of the tube sockets. For people here to help identify the frame, they will need left and right profile shots and detail shots of the L and R rear dropouts as well as the stay caps. A head on shot of the headtube would be good so people can check for badge drilling patterns. Is the tubing identified along with the headset and crankset?
The frame is not Nervex, the lugs and BB are. The number sequence on your bottom bracket is the measurement in minutes and degrees of the tube sockets. For people here to help identify the frame, they will need left and right profile shots and detail shots of the L and R rear dropouts as well as the stay caps. A head on shot of the headtube would be good so people can check for badge drilling patterns. Is the tubing identified along with the headset and crankset?
#3
Decrepit Member
Nervex was a French manufacturer of lugs, bottom bracket shells, fork crowns, and dropouts, and these parts were used by many frame builders, big and small, all over the world. The parts were high quality, but the builder's skills are far more important and ranged from the best builders in the world to amateurs who often made mistakes like overheating or underheating while brazing, leaving significant voids in brazed joints, etc. With a frame that has no decals, serial numbers, or distinctive construction details, I don't think you're going to have much luck Identifying who built it.
The numbers on the BB shell are angles, tubing size (French or English), chainstay dimensions and spacing, etc.

Last edited by Scooper; 02-15-15 at 09:33 AM.
#4
Junior Member
Thread Starter
Join Date: Feb 2015
Posts: 24
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
great explanation both, thank you!
EDIT -bertinjim beat me to it.
Nervex was a French manufacturer of lugs, bottom bracket shells, fork crowns, and dropouts, and these parts were used by many frame builders, big and small, all over the world. The parts were high quality, but the builder's skills are far more important and ranged from the best builders in the world to amateurs who often made mistakes like overheating or underheating while brazing, leaving significant voids in brazed joints, etc. With a frame that has no decals, serial numbers, or distinctive construction details, I don't think you're going to have much luck Identifying who built it.
The numbers on the BB shell are angles, tubing size (French or English), chainstay dimensions and spacing, etc.

Nervex was a French manufacturer of lugs, bottom bracket shells, fork crowns, and dropouts, and these parts were used by many frame builders, big and small, all over the world. The parts were high quality, but the builder's skills are far more important and ranged from the best builders in the world to amateurs who often made mistakes like overheating or underheating while brazing, leaving significant voids in brazed joints, etc. With a frame that has no decals, serial numbers, or distinctive construction details, I don't think you're going to have much luck Identifying who built it.
The numbers on the BB shell are angles, tubing size (French or English), chainstay dimensions and spacing, etc.
