Sugino At Triple Crankset and bottom bracket 50/45/28
#1
Senior Member
Thread Starter
Sugino At Triple Crankset and bottom bracket 50/45/28
Sugino AT crankset 50/45/28
Sugino Bottom Bracket 127 mm
This came off a Trek 614. Decent rider condition. Inside of the rings show chain wear. Needs cleaned. Rings are 50/45/28. Crank arms are 170 mm. I'm not sure what model bottom bracket. It is 127 mm and worked well with the Sugino AT. It may have been original to the Trek? Cups and spindle races look good. I'm going a bit by eBay prices and am trying to be a discount to closed auctions. If I am out of line, let me know. $75 shipped for both the crankset and bottom bracket.
Sugino Bottom Bracket 127 mm
This came off a Trek 614. Decent rider condition. Inside of the rings show chain wear. Needs cleaned. Rings are 50/45/28. Crank arms are 170 mm. I'm not sure what model bottom bracket. It is 127 mm and worked well with the Sugino AT. It may have been original to the Trek? Cups and spindle races look good. I'm going a bit by eBay prices and am trying to be a discount to closed auctions. If I am out of line, let me know. $75 shipped for both the crankset and bottom bracket.
#2
Full Member
I’m interested... I’m assuming the BB is English thread and 68mm wide since it came off a Trek..
are the BB cups marked Sugino and are these the narrow thin wall version?
are the BB cups marked Sugino and are these the narrow thin wall version?
#7
Senior Member
Thread Starter
Bidding war!
Just kidding.
Yes, English thread and 68 mm. I should have noted that. I'm not sure how to tell if it is thin walled.
Just kidding.
Yes, English thread and 68 mm. I should have noted that. I'm not sure how to tell if it is thin walled.
#8
Full Member
Pm sent for payment info.. it looks thin walled as it’s recessed on the inside by the bearing race..
#9
68 years + in saddle
Join Date: Nov 2013
Location: near Millheim PA
Posts: 5
Bikes: Salsa Fargo, Grove Innovations tandem, Magnum Peak e MTB, repack KlunkerOld CB "repack single speed, Trek roadster, KHS MTB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
This is the good stuff from mid 80s. I’m still running AT cranks with 175mm arms.
Thread
Thread Starter
Forum
Replies
Last Post
exmechanic89
Bicycle Mechanics
5
08-16-15 10:59 PM