Misc cranks
02-07-23, 06:45 PM
#1
It's the little things
Thread Starter
Join Date: Jan 2016
Location: Chicagoland
Posts: 732
Bikes: Too many, yet not enough
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 255 Post(s)
Liked 276 Times
in
127 Posts
Misc cranks
In an attempt to make more space in getting rid of some items. Look for more posts to come. No prices include shipping. All crankset are as pictured. Some would benefit from a cleaning, but are take offs or acquisitions over the years. All have wear and nicks and scrapes.
- Dura Ace 7400?? Crankset. Please note!! 2 different sizes crank arms. Drive side is 172.5 and NDS is 170. If both were matching I would be asking more. 52/42 chainrings and bolts. 52t chainring shows sign of chain rub/markings from previous owner. Only one dust cap. Tapers and threads are good. Asking $45+ actual shipping.
- Sold!!!! - Sakae SX crankset only. No rings. 170 mm. NDS arm is not marked. Possibly replacement? Tapers and threads are good. Asking $10+ shipping.
- Sold!!! - Lasco branded hideous red crankset. 46t. Tapers and threads in excellent condition. Asking $20+ shipping.
- Sugino super maxy, swaged (big chainring and crank arm are one piece). 170 mm. 52/42 chainrings. Also show evidence of chain drop/markings. Tapers and threads are good. Asking $25+ shipping.
I know these might cost more to ship than asking, but I will be posting additional items over the next few days. I would absolutely be willing to combine shipping. My zip is 60515. Sorry for crummy pics, more than willing to provide more upon request.
Thanks for looking!
- Dura Ace 7400?? Crankset. Please note!! 2 different sizes crank arms. Drive side is 172.5 and NDS is 170. If both were matching I would be asking more. 52/42 chainrings and bolts. 52t chainring shows sign of chain rub/markings from previous owner. Only one dust cap. Tapers and threads are good. Asking $45+ actual shipping.
- Sold!!!! - Sakae SX crankset only. No rings. 170 mm. NDS arm is not marked. Possibly replacement? Tapers and threads are good. Asking $10+ shipping.
- Sold!!! - Lasco branded hideous red crankset. 46t. Tapers and threads in excellent condition. Asking $20+ shipping.
- Sugino super maxy, swaged (big chainring and crank arm are one piece). 170 mm. 52/42 chainrings. Also show evidence of chain drop/markings. Tapers and threads are good. Asking $25+ shipping.
I know these might cost more to ship than asking, but I will be posting additional items over the next few days. I would absolutely be willing to combine shipping. My zip is 60515. Sorry for crummy pics, more than willing to provide more upon request.
Thanks for looking!
Last edited by Senrab62; 03-27-23 at 01:57 PM.
02-07-23, 06:57 PM
#3
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,053
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 1942 Post(s)
Liked 2,174 Times
in
1,437 Posts
Originally Posted by Senrab62
In an attempt to make more space in getting rid of some items. Look for more posts to come. No prices include shipping. All crankset are as pictured. Some would benefit from a cleaning, but are take offs or acquisitions over the years. All have wear and nicks and scrapes.
- Dura Ace 7400?? Crankset. Please note!! 2 different sizes crank arms. Drive side is 172.5 and NDS is 170. If both were matching I would be asking more. 52/42 chainrings and bolts. 52t chainring shows sign of chain rub/markings from previous owner. Only one dust cap. Tapers and threads are good. Asking $45+ actual shipping.
- Sakae SX crankset only. No rings. 170 mm. NDS arm is not marked. Possibly replacement? Tapers and threads are good. Asking $10+ shipping.
- Lasco branded hideous red crankset. 46t. Tapers and threads in excellent condition. Asking $20+ shipping.
- Sugino super maxy, swaged (big chainring and crank arm are one piece). 170 mm. 52/42 chainrings. Also show evidence of chain drop/markings. Tapers and threads are good. Asking $30+ shipping.
I know these might cost more to ship than asking, but I will be posting additional items over the next few days. I would absolutely be willing to combine shipping. My zip is 60515. Sorry for crummy pics, more than willing to provide more upon request.
Thanks for looking!
- Dura Ace 7400?? Crankset. Please note!! 2 different sizes crank arms. Drive side is 172.5 and NDS is 170. If both were matching I would be asking more. 52/42 chainrings and bolts. 52t chainring shows sign of chain rub/markings from previous owner. Only one dust cap. Tapers and threads are good. Asking $45+ actual shipping.
- Sakae SX crankset only. No rings. 170 mm. NDS arm is not marked. Possibly replacement? Tapers and threads are good. Asking $10+ shipping.
- Lasco branded hideous red crankset. 46t. Tapers and threads in excellent condition. Asking $20+ shipping.
- Sugino super maxy, swaged (big chainring and crank arm are one piece). 170 mm. 52/42 chainrings. Also show evidence of chain drop/markings. Tapers and threads are good. Asking $30+ shipping.
I know these might cost more to ship than asking, but I will be posting additional items over the next few days. I would absolutely be willing to combine shipping. My zip is 60515. Sorry for crummy pics, more than willing to provide more upon request.
Thanks for looking!
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1980s Vanni Losa Cassani thingy, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981? Faggin, 1996ish Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe (most not finished of course), 1989 Fauxsin MTB, 1981 Ciocc Mockba...I...am...done....
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1980s Vanni Losa Cassani thingy, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981? Faggin, 1996ish Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe (most not finished of course), 1989 Fauxsin MTB, 1981 Ciocc Mockba...I...am...done....
02-07-23, 07:06 PM
#4
It's the little things
Thread Starter
Join Date: Jan 2016
Location: Chicagoland
Posts: 732
Bikes: Too many, yet not enough
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 255 Post(s)
Liked 276 Times
in
127 Posts
Originally Posted by jdawginsc
Is the hideous Lasco single speed thickness or could it be used for multispeed cogs?
02-07-23, 07:21 PM
#5
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,053
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 1942 Post(s)
Liked 2,174 Times
in
1,437 Posts
Originally Posted by Senrab62
I am not 100% sure. I took it off a bike that had a 1/8 chain on it. I can try to grab the calipers and measure the teeth width of that is helpful.
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1980s Vanni Losa Cassani thingy, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981? Faggin, 1996ish Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe (most not finished of course), 1989 Fauxsin MTB, 1981 Ciocc Mockba...I...am...done....
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1980s Vanni Losa Cassani thingy, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981? Faggin, 1996ish Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe (most not finished of course), 1989 Fauxsin MTB, 1981 Ciocc Mockba...I...am...done....
02-07-23, 08:01 PM
#6
It's the little things
Thread Starter
Join Date: Jan 2016
Location: Chicagoland
Posts: 732
Bikes: Too many, yet not enough
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 255 Post(s)
Liked 276 Times
in
127 Posts
Originally Posted by jdawginsc
So single speed. Hmm. I might still want it. Let me think on that one as you add more items.
I've used a 1/8 chain on a 3/32 ring before, it's the other way around that won't work.
I measured about 2.5x at the widest part of the tooth. I don't know if that's helpful 😂.
02-07-23, 08:10 PM
#7
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,347
Bikes: Several, mostly not name brands.
Mentioned: 149 Post(s)
Tagged: 0 Thread(s)
Quoted: 3307 Post(s)
Liked 2,786 Times
in
1,608 Posts
Originally Posted by jdawginsc
Is the hideous Lasco single speed thickness or could it be used for multispeed cogs?
Originally Posted by Senrab62
I am not 100% sure. I took it off a bike that had a 1/8 chain on it. I can try to grab the calipers and measure the teeth width of that is helpful.
02-07-23, 08:41 PM
#8
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,053
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 1942 Post(s)
Liked 2,174 Times
in
1,437 Posts
Originally Posted by Senrab62
I've used a 1/8 chain on a 3/32 ring before, it's the other way around that won't work.
I measured about 2.5x at the widest part of the tooth. I don't know if that's helpful 😂.
I've used a 1/8 chain on a 3/32 ring before, it's the other way around that won't work.
I measured about 2.5x at the widest part of the tooth. I don't know if that's helpful 😂.
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1980s Vanni Losa Cassani thingy, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981? Faggin, 1996ish Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe (most not finished of course), 1989 Fauxsin MTB, 1981 Ciocc Mockba...I...am...done....
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1980s Vanni Losa Cassani thingy, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981? Faggin, 1996ish Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe (most not finished of course), 1989 Fauxsin MTB, 1981 Ciocc Mockba...I...am...done....
Likes For jdawginsc:
02-08-23, 12:39 PM
#9
Señor Member
Join Date: Oct 2004
Location: Hardy, VA
Posts: 17,579
Bikes: Mostly English - predominantly Raleighs
Mentioned: 64 Post(s)
Tagged: 0 Thread(s)
Quoted: 1326 Post(s)
Liked 787 Times
in
480 Posts
Originally Posted by Senrab62
I've used a 1/8 chain on a 3/32 ring before, it's the other way around that won't work.
I measured about 2.5x at the widest part of the tooth. I don't know if that's helpful 😂.
I've used a 1/8 chain on a 3/32 ring before, it's the other way around that won't work.
I measured about 2.5x at the widest part of the tooth. I don't know if that's helpful 😂.
__________________
In search of what to search for.
In search of what to search for.
02-09-23, 06:09 PM
#10
It's the little things
Thread Starter
Join Date: Jan 2016
Location: Chicagoland
Posts: 732
Bikes: Too many, yet not enough
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 255 Post(s)
Liked 276 Times
in
127 Posts
Originally Posted by USAZorro
What's the BCD on this?
02-09-23, 09:54 PM
#11
Señor Member
Join Date: Oct 2004
Location: Hardy, VA
Posts: 17,579
Bikes: Mostly English - predominantly Raleighs
Mentioned: 64 Post(s)
Tagged: 0 Thread(s)
Quoted: 1326 Post(s)
Liked 787 Times
in
480 Posts
Originally Posted by Senrab62
Sorry for delayed response. I believe it's 130 BCD. It is currently pending. Will update if it falls through.
__________________
In search of what to search for.
In search of what to search for.
Likes For USAZorro:
03-27-23, 01:57 PM
#12
It's the little things
Thread Starter
Join Date: Jan 2016
Location: Chicagoland
Posts: 732
Bikes: Too many, yet not enough
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 255 Post(s)
Liked 276 Times
in
127 Posts
Bump. Price adjustment. No reasonable, and some unreasonable offer will be refused! Just want this gone.
