Do Japanese frames really have a "dead" ride quality?
#26
Fat Guy on a Little Bike
Join Date: Jun 2008
Location: Philadelphia, PA
Posts: 15,944
Bikes: Two wheeled ones
Mentioned: 42 Post(s)
Tagged: 0 Thread(s)
Quoted: 1254 Post(s)
Liked 345 Times
in
174 Posts
Compared to a roadie? Yes, they do. They all feel dead unloaded compared to a roadie - it's a question of how dead. They're usually using heavier tubes (the odyssey can be an exception with some SL) and they have more relaxed geometry.
#27
Senior Member
Join Date: May 2012
Location: Point Reyes Station, California
Posts: 4,527
Bikes: Indeed!
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 1507 Post(s)
Liked 3,469 Times
in
1,131 Posts
We each have, perhaps, our own subjective definition of "dead." For me the only bikes I ever had that felt dead were a custom-built 531 bike that was hit head-on by a BMW (with me on it but at very low speeds!) and an early seventies Stella that was run over by a tour bus. Almost any bicycle makes me feel more alive, even the Schwinn Hollywood that was my only transportation in my starving student days.
Brent
#28
Senior Member
I define a dead ride as one that does not put a huge grin an my face and give me a thrilling sensation when I ride it. Some bikes give me a bigger grin than others. The only bike that did not put a grin on my face so far was a Trek OCLV .
#30
Fat Guy on a Little Bike
Join Date: Jun 2008
Location: Philadelphia, PA
Posts: 15,944
Bikes: Two wheeled ones
Mentioned: 42 Post(s)
Tagged: 0 Thread(s)
Quoted: 1254 Post(s)
Liked 345 Times
in
174 Posts
True Words These!
We each have, perhaps, our own subjective definition of "dead." For me the only bikes I ever had that felt dead were a custom-built 531 bike that was hit head-on by a BMW (with me on it but at very low speeds!) and an early seventies Stella that was run over by a tour bus. Almost any bicycle makes me feel more alive, even the Schwinn Hollywood that was my only transportation in my starving student days.
Brent
We each have, perhaps, our own subjective definition of "dead." For me the only bikes I ever had that felt dead were a custom-built 531 bike that was hit head-on by a BMW (with me on it but at very low speeds!) and an early seventies Stella that was run over by a tour bus. Almost any bicycle makes me feel more alive, even the Schwinn Hollywood that was my only transportation in my starving student days.
Brent
#31
Senior Member
Join Date: May 2005
Location: Los Angeles
Posts: 909
Bikes: Casati, Look, Torelli, Ridley, and a bunch of steel bikes from the 80s and the 90s..
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 11 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
They dial that in the new carbon bike so well that it rides like a Cadillac very still where you need it. I love my Time Compare to my 4 year old Ridley Damocles.
#32
Senior Member
Join Date: Apr 2015
Posts: 948
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 377 Post(s)
Likes: 0
Liked 14 Times
in
10 Posts
I'm looking to possibly get a Japanese touring bike. Not to tour but because I think they're just that damn cool. Would the suggestion be to pass, since I don't intend to tour with it, but to just ride it?
#33
Senior Member
Join Date: Jul 2004
Location: northern michigan
Posts: 13,317
Bikes: '77 Colnago Super, '76 Fuji The Finest, '88 Cannondale Criterium, '86 Trek 760, '87 Miyata 712
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 659 Post(s)
Liked 595 Times
in
313 Posts
A few mentions here about tires. Let me be specific, get rid of those big heavy tires and nab a set of Michelin Krylion 23's and pump them up to 115. Now, tell me how dead that feels.
Last edited by OldsCOOL; 11-14-15 at 09:32 PM.
#34
Senior Member
Join Date: Jul 2004
Location: northern michigan
Posts: 13,317
Bikes: '77 Colnago Super, '76 Fuji The Finest, '88 Cannondale Criterium, '86 Trek 760, '87 Miyata 712
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 659 Post(s)
Liked 595 Times
in
313 Posts
Heck no. Buy it and ride the crap out of it.....because you like it.
#35
What??? Only 2 wheels?
Join Date: Apr 2010
Location: Boston-ish, MA
Posts: 13,434
Bikes: 72 Peugeot UO-8, 82 Peugeot TH8, 87 Bianchi Brava, 76? Masi Grand Criterium, 74 Motobecane Champion Team, 86 & 77 Gazelle champion mondial, 81? Grandis, 82? Tommasini, 83 Peugeot PF10
Mentioned: 189 Post(s)
Tagged: 0 Thread(s)
Quoted: 1222 Post(s)
Liked 645 Times
in
232 Posts
If you painted all my bikes black my red one wouldn't be as fast. But the Japanese ones would still be great.
__________________
Real cyclists use toe clips.
With great bikes comes great responsibility.
jimmuller
Real cyclists use toe clips.
With great bikes comes great responsibility.
jimmuller
#37
Senior Member
I need another red bike so I can go fast again. I have no red bike at the moment and it is killing me. I have orange that is part red but it is not quite as fast as my old red one due to the yellow in the paint. It is so close but just not the same.
#38
Senior Member
After riding, racing steel bikes, almost all were Italian, since I was a teenage, I bought a LOOK KG171. The Jalabert special. That thing was flexy, but it rode well. Plenty of spring back (alive feel, to me) off the saddle. I am not a big guy, so a little flex is always welcome. Then, I bought an OCLV. It rode like a dead log but stiff and the feed back was dead, or I should say, not what I expected. Got rid of it after one season and got a Cannondale CADD3 from my club for cheeeeap.
They dial that in the new carbon bike so well that it rides like a Cadillac very still where you need it. I love my Time Compare to my 4 year old Ridley Damocles.
They dial that in the new carbon bike so well that it rides like a Cadillac very still where you need it. I love my Time Compare to my 4 year old Ridley Damocles.
#39
Señor Member
Join Date: Oct 2004
Location: Hardy, VA
Posts: 17,923
Bikes: Mostly English - predominantly Raleighs
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Quoted: 1491 Post(s)
Liked 1,090 Times
in
638 Posts
I had a Trek Tri-series for about 2 weeks that was made of 531, but that just felt dead to me. Sort of like what you described. Nothing "wrong" with it, but it just wasn't right for me.
__________________
In search of what to search for.
In search of what to search for.
#40
Senior Member
Thread Starter
Join Date: Apr 2015
Location: Boston
Posts: 56
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Lots of interesting info here - thanks!
Definitely not my intention. I have seen several casual mentions of this sentiment on multiple threads, did a search to learn more but didn't find much, and thought it might be an interesting discussion point.
I have an '81 Odyssey, which isn't quite the dedicated touring machine that it would later become (and become known for). I gather it has a very similar frame (if not identical) to the Lotus Legend of the same year. More a sport-touring geometry somewhere between a roadie and tourer.
Definitely not my intention. I have seen several casual mentions of this sentiment on multiple threads, did a search to learn more but didn't find much, and thought it might be an interesting discussion point.
What year is your Lotus Odyssey? While I don't think there are national characteristics to bikes, what you have to understand is that the odyssey was never a racing bike, and most (not all) were full tourers. Compared to the liveliness of a pure roadie, yes...all touring bikes are going to feel dead.
#41
Extraordinary Magnitude
Join Date: Aug 2009
Location: Waukesha WI
Posts: 13,646
Bikes: 1978 Trek TX700; 1978/79 Trek 736; 1984 Specialized Stumpjumper Sport; 1984 Schwinn Voyageur SP; 1985 Trek 620; 1985 Trek 720; 1986 Trek 400 Elance; 1987 Schwinn High Sierra; 1990 Miyata 1000LT
Mentioned: 84 Post(s)
Tagged: 0 Thread(s)
Quoted: 2608 Post(s)
Liked 1,699 Times
in
935 Posts
No, a touring bike isn't going to ride or corner or respond like an ultralight race bike- it's not supposed to.
I liken the ride of my tourers to the ride of a 1972 Cadillac Eldorado.
__________________
*Recipient of the 2006 Time Magazine "Person Of The Year" Award*
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
#42
Disco Infiltrator
Join Date: May 2013
Location: Folsom CA
Posts: 13,446
Bikes: Stormchaser, Paramount, Tilt, Samba tandem
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 3126 Post(s)
Liked 2,105 Times
in
1,369 Posts
For Taiwanese frames is it more of an honored-ancestor ride?
__________________
Genesis 49:16-17
Genesis 49:16-17
#43
Senior Member
#44
Friendship is Magic
Join Date: Nov 2010
Location: Sacramento, CA
Posts: 22,984
Bikes: old ones
Mentioned: 304 Post(s)
Tagged: 0 Thread(s)
Quoted: 26404 Post(s)
Liked 10,374 Times
in
7,203 Posts
#45
Senior Member
Join Date: Apr 2009
Location: Boulder County, CO
Posts: 1,511
Bikes: '92 22" Cannondale M2000, '92 Cannondale R1000 Tandem, another modern Canndondale tandem, Two Holy Grail '86 Cannondale ST800s 27" (68.5cm) Touring bike w/Superbe Pro components and Phil Wood hubs. A bunch of other 27" ST frames & bikes.
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 110 Post(s)
Likes: 0
Liked 4 Times
in
4 Posts
I've seen several folks on this sub mention that Japanese steel frames are often well built, but tend to have a "sterile" or "dead" ride quality to them. I'm curious to know if this is a widely held view, and if so, what is the explanation? Frame tubing? Geometry? I recently overhauled an '81 Lotus Odysssey (Tange Champion 2 tubing), which has a classic sport touring geometry, and I can't say I notice much of a substantive difference in ride quality between it and a Trek 610 (531 tubing) that I used to ride -- both ride great. (However, I unfortunately had to let go of the Trek a few years ago during a move, so I can't do a side-by-side comparison.) Thoughts?
You can't begin to compare the craftsmanship, skill or finish of 70s or early 80s Japanese frame building or kit to anything. It was a world apart in the skill level, tolerances, and quality control that even Klein, Cannondale, GT (Morgul-Bismark), YETI, or any other US framebuilder could never even get close to matching. Grant Peterson is absolutely right about that but of fact. Regarding peak-Japan kit. The days of getting hand polished components or frames built in facilities backed by 0% loans will never be seen again. Taiwan has better quality control because of technological advances but the reality is that the average Centurion selling on Craigslist is a better built bike than a Waterford or any other U.S. made boutique frame.
There is so much disingenuous BS in cycling with many companies and builders fighting in a predatory fashion for a piec of the same small slice of pie. It's a Rivendell or Mercian, not both for most. Unlike car collectors bike folks seem to hav more constrained budgets. However, you talk to those free of agenda and that have had Plain Jane Japanese steel racing lightweights and they'll tell you they were some of the best bios they've ever owned (for a given tube set or comparable tubeset/size.
Does vintage Japanese have the same cache as Italian steel, no, but that nothin' to do with the bikes and everything to do with branding and unsubstantiated bias. The 19 year old brazing in Italy for big head badges had nothing on the master builders in Japan during that era.
Last edited by mtnbke; 11-15-15 at 12:31 AM.
#46
Senior Member
Join Date: May 2005
Location: Los Angeles
Posts: 909
Bikes: Casati, Look, Torelli, Ridley, and a bunch of steel bikes from the 80s and the 90s..
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 11 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
so they can ride their 9000 dollar Pinarellos with deep dish carbon wheels to Starbucks, park it, with their matching jersey socks and their brand name gloves and drink their cold coffee. Can't do that on a touring bike where the gap between the tire and the seat tube is 1/2".
#47
Banned.
Join Date: Sep 2007
Location: Carlsbad, CA
Posts: 6,434
Bikes: '09 Felt F55, '84 Masi Cran Criterium, (2)'86 Schwinn Pelotons, '86 Look Equippe Hinault, '09 Globe Live 3 (dogtaxi), '94 Greg Lemond, '99 GT Pulse Kinesis
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 389 Post(s)
Liked 270 Times
in
153 Posts
I suspect I might have contributed to this bias, by mentioning that my Lemond felt so much livelier than my beloved '86 Schwinn Peloton. Please let me know if I'm just being paranoid and it wasn't me.
First: my Japanese-built Schwinn Peloton was built in 1986 of Columbus SP & SL tubing, was chrome plated underneath the paint, and was ridden on 23c tires
Second: my Italian-built Greg Lemond was built in 1994 of Columbus TSX tubing, and was ridden on 25c tires.
All other factors were identical:
~same saddle, seatpost, bars, components, wheels, ...even the bottle cages on both bikes were plastic Velocity in black. Both were even ridden on Continental GP4000 tires, except that the Peloton has slightly narrower 23c.
It's funny that I just ran into this thread after dinking my middle fingernail on each frame for the benefit of my beloved GF. Both her and my Lemond sounded slightly more sonorous when dinking the center of the top tube. But this is very likely due to the fact that my Schwinn Pelotons are both chrome-plated and then painted.
I still love the way my Japanese-built Peloton rides. Did a 72 miler on her today, and it was a special day. Also, I've crash-tested the 86 Peloton at least 8 times and that frame is the Sherman tank of racing bicycles. Bet I could use that frame to machete my way through a jungle of modern carbon frames, build it back up and it would still track truer than gospel.
P.S. Aside from the longer top tube on the Lemond, they have nearly identical BB heights, and all other dimensions are within half a cm as well. The Lemond also has the less-steep seat tube angle, and the saddle is a little less than a cm further back and a little more than half a cm lower.
TLDR, but didnt' want to leave anything out.
First: my Japanese-built Schwinn Peloton was built in 1986 of Columbus SP & SL tubing, was chrome plated underneath the paint, and was ridden on 23c tires
Second: my Italian-built Greg Lemond was built in 1994 of Columbus TSX tubing, and was ridden on 25c tires.
All other factors were identical:
~same saddle, seatpost, bars, components, wheels, ...even the bottle cages on both bikes were plastic Velocity in black. Both were even ridden on Continental GP4000 tires, except that the Peloton has slightly narrower 23c.
It's funny that I just ran into this thread after dinking my middle fingernail on each frame for the benefit of my beloved GF. Both her and my Lemond sounded slightly more sonorous when dinking the center of the top tube. But this is very likely due to the fact that my Schwinn Pelotons are both chrome-plated and then painted.
I still love the way my Japanese-built Peloton rides. Did a 72 miler on her today, and it was a special day. Also, I've crash-tested the 86 Peloton at least 8 times and that frame is the Sherman tank of racing bicycles. Bet I could use that frame to machete my way through a jungle of modern carbon frames, build it back up and it would still track truer than gospel.
P.S. Aside from the longer top tube on the Lemond, they have nearly identical BB heights, and all other dimensions are within half a cm as well. The Lemond also has the less-steep seat tube angle, and the saddle is a little less than a cm further back and a little more than half a cm lower.
TLDR, but didnt' want to leave anything out.
Last edited by calamarichris; 11-15-15 at 02:01 AM.
#48
Senior Member
Join Date: May 2010
Location: Hurricane Alley , Florida
Posts: 3,903
Bikes: Treks (USA), Schwinn Paramount, Schwinn letour,Raleigh Team Professional, Gazelle GoldLine Racing, 2 Super Mondias, Carlton Professional.
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 78 Post(s)
Liked 30 Times
in
22 Posts
"Deader than a door nail".....
#50
verktyg
Join Date: Jul 2006
Location: SF Bay Area
Posts: 4,030
Bikes: Current favorites: 1988 Peugeot Birraritz, 1984 Gitane Super Corsa, 1980s DeRosa, 1981 Bianchi Campione Del Mondo, 1992 Paramount OS, 1988 Colnago Technos, 1985 RalieghUSA SBDU Team Pro
Mentioned: 207 Post(s)
Tagged: 0 Thread(s)
Quoted: 1036 Post(s)
Liked 1,238 Times
in
654 Posts
Now, the rest of the story...
There was never much of a sporting bicycle tradition in Japan. Before the US Bike Boom almost all of the millions of bicycles produced in Japan for the domestic market were 50 Lb. single speed transportation models with rod brakes. Band brakes on the rear were a luxury and 3 speed rear hubs even more so.
Bicycle purchases were made by ultra frugal Japanese housewives so anything beyond basic black was not going to sell. This bike with all of the chrome would have been a luxury model.
These bikes had substantial rear racks. The wives sat sidesaddle on the rack holding the baby plus shopping bags while the husband pedaled. I was always amazed by how well they could balance at slow speeds weaving in and out of traffic.
Keiren track racing is a "sport" in the same sense that thoroughbred horse racing is a sport. The primary draw is parimutuel betting - legalized gambling!
In the late 60's at least one US bicycle wholesaler went to Japan to have derailleur bikes made to their specs. Their specs were "make us bikes just like the one in this picture".
Almost all of the Japanese bikes imported during the US bike boom were heavy clunkers compared to the 27 to 28 Lb. entry level all steel European models.
Many low end European "gas pipe" bikes had main tubes with wall thicknesses from 1.2mm to 2mm. Japanese bikes had tubes up to 3mm thick and weighed 3 to 4 Lbs. more than equivalent European models.
Heavy tubing like that gives a very dead feel. There's no spring to the frame and the tubing absorbs or transmits all of the road shock and vibrations.
Also, most Japanese rode 19" to 21" frames (50cm - 54cm) with short top tubes, slack angles, long wheelbases and long fork rakes. Very few Japanese could ride a bike over 56cm (22") so they had no idea how to build frames for westerners.
During the US bike boom fad a WHOLE LOT of people got into the business to make a fast buck. Some made a bundle during the first few years. You could sell anything with derailleurs and drop bars and call it a "10 SPEED RACER"!
By the mid 70's a few people knowledgeable about bicycle ride and handling features got involved in with the companies who were importing Japanese bikes.
By that time Japanese components had developed a reputation for ease of use and reliability. That plus Japanese bikes had far better finishes and cosmetics than European entry level and mid range bikes.
In late 70's many mid range Japanese bikes had the same quality that top name European bikes were noted for. The ride and handling of the Japanese bikes had improved drastically and they were taking over the US lightweight bike market. Protective tariffs kept many of those bikes out of much of the European market during those years.
Case in point about dead ride quality:
Our shop was a few blocks away from a university. Every August and January out of town students used to bring their bikes from home packed in bike boxes. We were reluctant to reassemble those because the usually turned into a can of worms!
About 1975 someone brought in a new boxed up top end Centurion. Business wa a little slow so we decided to assemble it for him to check out the quality.
The bike had good quality Japanese alloy components including rims. The cosmetics were very good. The frame had a sticker saying butted 4130 Steel Tubing.
Turns out that while the tubing was 4130 alloy steel, the main tubes were about 2.5mm + thick. The 58cm bike weighed 32 Lbs. - 5 Lbs. more than an entry level all steel French bike!
Most Japanese bikes from the late 70's rode and handled as well if not better than equivalent European brands.
By the early 80's Japanese bikes lost out to less expensive bike made in Taiwan.
So now you know...
verktyg 1964
Chas.
There was never much of a sporting bicycle tradition in Japan. Before the US Bike Boom almost all of the millions of bicycles produced in Japan for the domestic market were 50 Lb. single speed transportation models with rod brakes. Band brakes on the rear were a luxury and 3 speed rear hubs even more so.
Bicycle purchases were made by ultra frugal Japanese housewives so anything beyond basic black was not going to sell. This bike with all of the chrome would have been a luxury model.
These bikes had substantial rear racks. The wives sat sidesaddle on the rack holding the baby plus shopping bags while the husband pedaled. I was always amazed by how well they could balance at slow speeds weaving in and out of traffic.
Keiren track racing is a "sport" in the same sense that thoroughbred horse racing is a sport. The primary draw is parimutuel betting - legalized gambling!
In the late 60's at least one US bicycle wholesaler went to Japan to have derailleur bikes made to their specs. Their specs were "make us bikes just like the one in this picture".
Almost all of the Japanese bikes imported during the US bike boom were heavy clunkers compared to the 27 to 28 Lb. entry level all steel European models.
Many low end European "gas pipe" bikes had main tubes with wall thicknesses from 1.2mm to 2mm. Japanese bikes had tubes up to 3mm thick and weighed 3 to 4 Lbs. more than equivalent European models.
Heavy tubing like that gives a very dead feel. There's no spring to the frame and the tubing absorbs or transmits all of the road shock and vibrations.
Also, most Japanese rode 19" to 21" frames (50cm - 54cm) with short top tubes, slack angles, long wheelbases and long fork rakes. Very few Japanese could ride a bike over 56cm (22") so they had no idea how to build frames for westerners.
During the US bike boom fad a WHOLE LOT of people got into the business to make a fast buck. Some made a bundle during the first few years. You could sell anything with derailleurs and drop bars and call it a "10 SPEED RACER"!
By the mid 70's a few people knowledgeable about bicycle ride and handling features got involved in with the companies who were importing Japanese bikes.
By that time Japanese components had developed a reputation for ease of use and reliability. That plus Japanese bikes had far better finishes and cosmetics than European entry level and mid range bikes.
In late 70's many mid range Japanese bikes had the same quality that top name European bikes were noted for. The ride and handling of the Japanese bikes had improved drastically and they were taking over the US lightweight bike market. Protective tariffs kept many of those bikes out of much of the European market during those years.
Case in point about dead ride quality:
Our shop was a few blocks away from a university. Every August and January out of town students used to bring their bikes from home packed in bike boxes. We were reluctant to reassemble those because the usually turned into a can of worms!
About 1975 someone brought in a new boxed up top end Centurion. Business wa a little slow so we decided to assemble it for him to check out the quality.
The bike had good quality Japanese alloy components including rims. The cosmetics were very good. The frame had a sticker saying butted 4130 Steel Tubing.
Turns out that while the tubing was 4130 alloy steel, the main tubes were about 2.5mm + thick. The 58cm bike weighed 32 Lbs. - 5 Lbs. more than an entry level all steel French bike!
Most Japanese bikes from the late 70's rode and handled as well if not better than equivalent European brands.
By the early 80's Japanese bikes lost out to less expensive bike made in Taiwan.
So now you know...
verktyg 1964
Chas.
__________________
Don't believe everything you think! History is written by those who weren't there....
Chas. ;-)
Don't believe everything you think! History is written by those who weren't there....
Chas. ;-)
Last edited by verktyg; 11-15-15 at 06:39 AM.