Go Back  Bike Forums > Bike Forums > Classic & Vintage
Reload this Page >

Poll: Have Dropout Problem, Need Solution

Notices
Classic & Vintage This forum is to discuss the many aspects of classic and vintage bicycles, including musclebikes, lightweights, middleweights, hi-wheelers, bone-shakers, safety bikes and much more.
View Poll Results: Have Dropout Problem, Need Solution
Bend it back; that'll buff right out.
57.50%
Put a claw (mount-on hanger) on it; it'll never be straight and/or strong.
12.50%
Leave it; make it a ss/fixie.
0
0%
Cut it off, make it a ss/fixie.
7.50%
Part it out.
5.00%
Hire local framebuilder to replace dropout (not really an option).
2.50%
Other.
15.00%
Multiple Choice Poll. Voters: 40. You may not vote on this poll

Poll: Have Dropout Problem, Need Solution

Old 02-13-16, 05:10 PM
  #51  
Ride, Wrench, Swap, Race
 
dddd's Avatar
 
Join Date: Jan 2010
Location: Northern California
Posts: 9,134

Bikes: Cheltenham-Pedersen racer, Boulder F/S Paris-Roubaix, Varsity racer, '52 Christophe, '62 Continental, '92 Merckx, '75 Limongi, '76 Presto, '72 Gitane SC, '71 Schwinn SS, etc.

Mentioned: 132 Post(s)
Tagged: 0 Thread(s)
Quoted: 1543 Post(s)
Liked 1,253 Times in 835 Posts
Originally Posted by repechage
I would obtain 3 -10x1mm fasteners to use two with nuts and washers to stabilize the axle area, one longer one to thread into the hangar. Get out the acetylene torch with a small tip, heat the bend to dull red and align by eye using the long bolt as a lever. All after referenceing an old college text book, quench the area with a wet towel or spray bottle with water to harden it, the torch work having annealed it.
The severe bend I think is not a good candidate for a cold bend return.
This sounds like a good approach, the part about using a 10x1 bolt (any rear axle) and two nuts (cones) as a handle which will best stabilize the threaded bore.
Might have to struggle to get the axle started threading in, then run it in about 15 turns using a Vise-Grip, followed by tightening the cones heavily, flattening the area around the hole.
One cone must be threaded onto the axle beforehand, thought I'd add that reminder...

Thinking this thru, a second axle assembly gets clamped into the dropout slots to preserve alignment between dropouts, then one can optionally do the torch-heating part at the expense of the axle/cone's heat-treatment, and bend back the hanger while it is (or isn't) red hot.
dddd is online now  
Old 02-13-16, 09:00 PM
  #52  
Senior Member
 
Join Date: Dec 2008
Location: Oregon
Posts: 366
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time in 1 Post
It's not a high end frame, a framebuilder will charge more than the frame is worth. How big is it? Looks like a 62cm from pics. Sell the frame "as is" to someone who wants to build up another IGH bike (like me) or to someone wanting to do fixed
choteau is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jellyfishhh
Bicycle Mechanics
33
06-07-17 01:40 PM
Barrettscv
Bicycle Mechanics
8
05-17-15 11:39 AM
DubT
Tandem Cycling
18
04-29-13 09:19 AM
brian3069
Classic & Vintage
13
10-14-12 10:14 AM
SCL
Bicycle Mechanics
15
09-10-10 09:23 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.