How do I get a new chain for my Univega?
05-21-16, 09:56 PM
#1
Senior Member
Thread Starter
How do I get a new chain for my Univega?
Need a new chain for my Univega Nuovo Sport 12 speed. How do I order a new one and where? How do I measure it?
05-21-16, 10:15 PM
#3
Senior Member
KMC chains, for use with 6/7 speed compatible cassettes in your case.
I order thru Amazon..
Add number of links from old chain. Minus 1 from total since KMC uses missing link.
I order thru Amazon..
Add number of links from old chain. Minus 1 from total since KMC uses missing link.
05-21-16, 10:40 PM
#4
Senior Member
Thread Starter
Ok so just count the number of links and subtract one link?
05-21-16, 11:31 PM
#5
Senior Member
05-21-16, 11:33 PM
#6
Senior Member
Thread Starter
Ok got it. Found them on Amazon. thanks
05-22-16, 12:40 AM
#7
Bort
Join Date: Dec 2006
Location: Berkeley, CA
Posts: 103
Bikes: 1966 Schwinn Paramount, 86 Univega Gran Sprint, 83 Univega Gran Turismo
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 29 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
alternatively check out the section called Chain Length:
Derailer Adjustment
Derailer Adjustment
05-22-16, 02:07 AM
#8
Senior Member
Join Date: Apr 2007
Location: Thunder Bay, Ontario, Canada - burrrrr!
Posts: 11,674
Bikes: 1958 Rabeneick 120D, 1968 Legnano Gran Premio, 196? Torpado Professional, 2000 Marinoni Piuma
Mentioned: 210 Post(s)
Tagged: 0 Thread(s)
Quoted: 1372 Post(s)
Likes: 0
Liked 1,751 Times
in
938 Posts
For five, six, seven and eight cog freewheels or free hubs, I always use eight speed chain. It is lighter and works better than the old school offerings, in my opinion. And yes, the eight speed chain will work perfectly with all of the mentioned cog counts. Now, about length.
You can measure the old chain, or lay the new one beside the old, to get the original length, assuming the old chain is correctly sized. The best way I know to get the right length is as follows...
Fit the chain onto the largest cog and largest ring, insuring that the chain is properly threaded through the rear and front derailleur. With the chain on the two biggies, pull the ends together. Cut the chain at the spot that will still allow the ends to be joined with the master clip. Join the chain and give it a try. Chances are you will be done with the task and the chain will be properly sized.
Hope that is a help.
You can measure the old chain, or lay the new one beside the old, to get the original length, assuming the old chain is correctly sized. The best way I know to get the right length is as follows...
Fit the chain onto the largest cog and largest ring, insuring that the chain is properly threaded through the rear and front derailleur. With the chain on the two biggies, pull the ends together. Cut the chain at the spot that will still allow the ends to be joined with the master clip. Join the chain and give it a try. Chances are you will be done with the task and the chain will be properly sized.
Hope that is a help.
__________________
"98% of the bikes I buy are projects".
"98% of the bikes I buy are projects".
05-22-16, 07:28 AM
#10
Senior Member
Join Date: Jan 2015
Location: Los Angeles
Posts: 4,703
Bikes: 82 Medici, 2011 Richard Sachs, 2011 Milwaukee Road
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 1948 Post(s)
Liked 2,010 Times
in
1,109 Posts
Don't throw away the old chain right away. You may find that the rear cogs and maybe the front chainrings have worn with the old chain. Ride it a bit with the new chain and if all is well with no skipping during out of saddle efforts then toss the old chain. If things aren't smooth and quiet, then put on the old chain back on, while you shop for new cogs/chainrings.
Jeff
Jeff
