ISO and For Trade thread part 4
#1426
Senior Member
Back on the hunt for an early 80's Schwinn Voyageur 11.8 frame. Seeing if anyone here has one they would let go. For some reason, black
Is the colour I want for this model.
Like this
Is the colour I want for this model.
Like this
#1427
Banned
Join Date: Aug 2013
Posts: 6,480
Mentioned: 93 Post(s)
Tagged: 0 Thread(s)
Quoted: 1361 Post(s)
Likes: 0
Liked 423 Times
in
282 Posts
Anyone have an orphan, left side for triple Shimano STI brifter 7 / 8 speed? Marred up is completely acceptable.
Please let me know what you need in trade or other.
This is for my beater '92 Stumpjumper road drop conversion. Most everything on it is already mismatched, parts from junk, BOC here off the forum. Serious mismatched as in everything.... three different makers for just the seat post alone. Same goes whatever the headset is plus mystery threads, because the chrome fork was just as mysterious. LOL
I've been getting by with an RX100 double that I rebuilt and only run with the two larger chainrings, but now want to play in the dirt and aggressive climbs.
Please let me know what you need in trade or other.
This is for my beater '92 Stumpjumper road drop conversion. Most everything on it is already mismatched, parts from junk, BOC here off the forum. Serious mismatched as in everything.... three different makers for just the seat post alone. Same goes whatever the headset is plus mystery threads, because the chrome fork was just as mysterious. LOL
I've been getting by with an RX100 double that I rebuilt and only run with the two larger chainrings, but now want to play in the dirt and aggressive climbs.
#1428
Senior Member
Join Date: Sep 2012
Location: Calgary
Posts: 665
Bikes: Condor, Cinelli SC, MKM Metcalfe, Peugeot AE08, Bianchi, Cougar, Miyata, Harry Hall, Holdsworth Special, Raleigh Int'l, Le Croco, Bob Jackson, Zeus
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 114 Post(s)
Liked 102 Times
in
53 Posts
ISO Milremo Competizione toe straps
I have 3 straps - red new, blue used and yellow used. I am looking for any or all of these colours to complete pairs.
I have lots of things to trade.
Thanks.
Brad
Milremo Competizione Strap by BJ Stevens, on Flickr
I have lots of things to trade.
Thanks.
Brad
Milremo Competizione Strap by BJ Stevens, on Flickr
__________________
Better bike .. Better life!
Better bike .. Better life!
#1429
Member
Join Date: Sep 2017
Posts: 32
Bikes: Tom Board 653, Dawes Imperial
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#1430
Senior Member
Unfortunately no. I've looked at a couple of big box hardware stores and also a local one with no luck. This nut is just a really uncommon type. I think the best bet is to find a matching donor derailleur to use its parts.
I might get creative and make one if I get that desperate. I thought about cutting the head off of a spare socket cap screw and tapping threads into it.
I might get creative and make one if I get that desperate. I thought about cutting the head off of a spare socket cap screw and tapping threads into it.
#1431
Member
Join Date: Sep 2017
Posts: 32
Bikes: Tom Board 653, Dawes Imperial
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
If yours is too mangled to measure, I may have a complete one that I can get the gauges on. Let me know if this would be useful to you.
Z
#1432
Senior Member
I had the same idea, but not sure that my taps would do the thick. What is it, something like M5/ M6? The "lead in" section of my tap (there must be a proper technical term) may not clear the hex socket.
If yours is too mangled to measure, I may have a complete one that I can get the gauges on. Let me know if this would be useful to you.
Z
If yours is too mangled to measure, I may have a complete one that I can get the gauges on. Let me know if this would be useful to you.
Z
If only they used M6 allen nuts... I have some of those laying around.
#1433
Senior Member
Join Date: Aug 2007
Location: Evanston, IL
Posts: 5,093
Bikes: many
Mentioned: 63 Post(s)
Tagged: 0 Thread(s)
Quoted: 1444 Post(s)
Liked 1,392 Times
in
760 Posts
#1434
Senior Member
Join Date: Sep 2012
Location: Calgary
Posts: 665
Bikes: Condor, Cinelli SC, MKM Metcalfe, Peugeot AE08, Bianchi, Cougar, Miyata, Harry Hall, Holdsworth Special, Raleigh Int'l, Le Croco, Bob Jackson, Zeus
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 114 Post(s)
Liked 102 Times
in
53 Posts
Milremo Competizione straps
Thanks for the heads up @smontanaro but I’d like to match what I have. Slim chance but I’ll try.
Cheers.
Brad
Cheers.
Brad
__________________
Better bike .. Better life!
Better bike .. Better life!
#1435
Senior Member
Join Date: Sep 2017
Location: Greenville SC
Posts: 4,127
Bikes: 1975 Motobecane Grand Jubile, 2020 Holdsworth Competition, 2022 Giant Trance 29 3
Mentioned: 42 Post(s)
Tagged: 0 Thread(s)
Quoted: 3359 Post(s)
Liked 3,638 Times
in
1,244 Posts
*Rack is gone*
Also looking for:
-White Benotto handlebar tape, enough for one bike.
-Big randonneur-style handlebar bag, I ride 25" frames, so I need something around 10" tall. Berthoud GB28, Acorn Tall Rando, Swift Ozette, or something vintage. I like the leather/canvas look a lot. I have a Velo-Orange rando bag in okay condition that I might want to offer up.
-Long setback 26.2mm seatpost, silver/polished silver.
Also looking for:
-White Benotto handlebar tape, enough for one bike.
-Big randonneur-style handlebar bag, I ride 25" frames, so I need something around 10" tall. Berthoud GB28, Acorn Tall Rando, Swift Ozette, or something vintage. I like the leather/canvas look a lot. I have a Velo-Orange rando bag in okay condition that I might want to offer up.
-Long setback 26.2mm seatpost, silver/polished silver.
Last edited by abshipp; 11-10-17 at 08:50 AM.
#1436
Fat Guy on a Little Bike
Join Date: Jun 2008
Location: Philadelphia, PA
Posts: 15,944
Bikes: Two wheeled ones
Mentioned: 42 Post(s)
Tagged: 0 Thread(s)
Quoted: 1254 Post(s)
Liked 345 Times
in
174 Posts
WTB:
Kelly take offs
7sp Shimano dt shifters - tricolor or 105.
Have - too much to list. Ask!
Kelly take offs
7sp Shimano dt shifters - tricolor or 105.
Have - too much to list. Ask!
#1437
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,629
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3871 Post(s)
Liked 2,568 Times
in
1,579 Posts
It wouldn't be ideal (or as aesthetically pleasing), but what about using an M5-0.8 acorn nut and slotting the top for a flathead screwdriver?
#1438
Senior Member
Join Date: Sep 2005
Location: Oakland, CA
Posts: 3,265
Bikes: '82 Univega Competizione, '72 Motobecane Grand Record, '83 Mercian KOM Touring, '85 Univega Alpina Uno, '76 Eisentraut Limited
Mentioned: 57 Post(s)
Tagged: 0 Thread(s)
Quoted: 1088 Post(s)
Liked 1,205 Times
in
701 Posts
Looking for a 125.5mm Stronglight spindle to make my 49d a triple (which I assume will work...).
I have a 118mm spindle to trade, and various other things if you don't need to specifically swap spindles.
Thanks!
I have a 118mm spindle to trade, and various other things if you don't need to specifically swap spindles.
Thanks!
Last edited by noobinsf; 11-02-17 at 06:48 PM.
#1439
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,784
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3587 Post(s)
Liked 3,400 Times
in
1,934 Posts
#1440
Senior Member
Join Date: Sep 2005
Location: Oakland, CA
Posts: 3,265
Bikes: '82 Univega Competizione, '72 Motobecane Grand Record, '83 Mercian KOM Touring, '85 Univega Alpina Uno, '76 Eisentraut Limited
Mentioned: 57 Post(s)
Tagged: 0 Thread(s)
Quoted: 1088 Post(s)
Liked 1,205 Times
in
701 Posts
#1441
Death fork? Naaaah!!
ISO 117mm spindle for Italian BB.
Top
Top
__________________
You know it's going to be a good day when the stem and seatpost come right out.
(looking for a picture and not seeing it? Thank the Photobucket fiasco.PM me and I'll link it up.)
You know it's going to be a good day when the stem and seatpost come right out.
(looking for a picture and not seeing it? Thank the Photobucket fiasco.PM me and I'll link it up.)
#1442
Senior Member
I had the same thought as a quick and dirty solution but have been holding out on that one. I'm not really a huge fan of flathead bolts. The hex sides of the nut would also have to be rounded out in order to fit into the slot too. Not sure how I could do that clean enough.
#1443
Senior Member
ISO Shimano 9 speed road cassette with short range. I have a CS-M750 to trade. I believe this came from a Shimano Deore XT groupset. Cogs are 11t-34t. Used but in good shape.
Also have other random stuff for trade, just ask.
Also have other random stuff for trade, just ask.
#1444
Senior Member
Join Date: May 2010
Location: Memphis, TN
Posts: 874
Bikes: 1982 Trek 613, 1988 Panasonic MC 2500, 1981 Schwinn Super Sport, 1975 Raleigh Super Course MKII, 1985 Miyata 210
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 178 Post(s)
Likes: 0
Liked 5 Times
in
4 Posts
Edit: NVM, it's 11-32.
Last edited by jpaschall; 11-03-17 at 05:28 AM.
#1445
Bad example
Join Date: Nov 2015
Location: Seattle and Reims
Posts: 3,065
Bikes: Peugeot: AO-8 1973, PA-10 1971, PR-10 1973, Sante 1988; Masi Gran Criterium 1975, Stevenson Tourer 1980, Stevenson Criterium 1981, Schwinn Paramount 1972, Rodriguez 2006, Gitane Federal ~1975, Holdsworth Pro, Follis 172 ~1973, Bianchi '62
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 825 Post(s)
Liked 208 Times
in
95 Posts
I have the Kelly take-offs. Good shape, just did not work for me. I’ll send you a pair free. I’m out of town at the moment but back next Tuesday, and I will dig them up for you.
#1448
Senior Member
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,744
Bikes: Yes
Mentioned: 525 Post(s)
Tagged: 0 Thread(s)
Quoted: 3230 Post(s)
Liked 3,868 Times
in
1,439 Posts
I think I have a 12-27 Ultegra 9-speed cassette that's in pretty good condition. Is that within the range of what you want?
__________________
My Bikes
My Bikes
#1450
Senior Member
Join Date: May 2010
Location: Memphis, TN
Posts: 874
Bikes: 1982 Trek 613, 1988 Panasonic MC 2500, 1981 Schwinn Super Sport, 1975 Raleigh Super Course MKII, 1985 Miyata 210
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 178 Post(s)
Likes: 0
Liked 5 Times
in
4 Posts
Looking to trade a pair of Suntour Cyclone bolt-on shifters for same model clamp-on shifters.