Go Back  Bike Forums > Bike Forums > Classic & Vintage
Reload this Page >

ISO and for trade thread part 5

Notices
Classic & Vintage This forum is to discuss the many aspects of classic and vintage bicycles, including musclebikes, lightweights, middleweights, hi-wheelers, bone-shakers, safety bikes and much more.

ISO and for trade thread part 5

Old 01-31-21, 11:56 AM
  #3526  
Full Member
 
Dannyboy21's Avatar
 
Join Date: Aug 2019
Location: North Eastern Ontario, Canada
Posts: 302

Bikes: 1980 Marinoni Special, 1987 Ciocc Microf. C40, 1978 Raleigh Competition GS, 1982 Colnago Super, 1972 Gitane Pro TdF, 1976 Belgian Diamant by Martelly, 1989 Trek 520, 1972 Dawes Galaxy 2014 Cervelo R5, 2020 Salsa Warbird, 2013 Giant Trance X1

Liked 63 Times in 43 Posts
found it

Originally Posted by brian3069
unworthy1 clubman - I was able to find what I was looking for. Thanks for your help.
Dannyboy21 is offline  
Likes For Dannyboy21:
Old 01-31-21, 05:18 PM
  #3527  
Full Member
 
IsleRide's Avatar
 
Join Date: Sep 2011
Location: Western MA
Posts: 227
Liked 81 Times in 50 Posts
Campagnolo 1044 "World" Seat Post for trade

Not for sale. Want to trade 26.2 for equal condition 26.8. (or purchase 26.8, or maybe vintage Gipiemme, Avocet, etc.)
Early, no insertion lines.Typical lower scuffs. Upper 40-50mm of shaft is nice. Have more photos.







IsleRide is offline  
Old 02-02-21, 08:03 AM
  #3528  
Death fork? Naaaah!!
 
top506's Avatar
 
Join Date: Nov 2005
Location: The other Maine, north of RT 2
Posts: 5,352

Bikes: Seriously downsizing.

Liked 673 Times in 301 Posts
Huret rear drop-out adjusters

These:

https://www.ebay.com/itm/Huret-parts...2/143694301212

Anyone have a set? I'd rather deal with the community than pull the trigger on the 'bay.

Top
__________________
You know it's going to be a good day when the stem and seatpost come right out.

(looking for a picture and not seeing it? Thank the Photobucket fiasco.PM me and I'll link it up.)
top506 is offline  
Old 02-03-21, 09:48 PM
  #3529  
Senior Member
 
scarlson's Avatar
 
Join Date: Jun 2010
Location: Medford MA
Posts: 2,089

Bikes: Ron Cooper touring, 1959 Jack Taylor 650b ladyback touring tandem, Vitus 979, Joe Bell painted Claud Butler Dalesman, Colin Laing curved tube tandem, heavily-Dilberted 1982 Trek 6xx, René Herse tandem

Liked 1,453 Times in 723 Posts
Long shot, but...

Has anybody got a 16" wheel folding bike I could borrow to test-ride in the Boston area? Like a Brompton or a Dahon, I guess? I have some weird prototype 45/75 R16 radial tires that an engineer on Harvard's fuel mileage championship team gave me. I kind of want to see what they're like on a bicycle, but I have nothing with 16" wheels. I've got nothing in trade, but if you've got a 16" folder and your curiosity is piqued by these weird things, we can both try it out!
__________________
Owner & co-founder, Cycles René Hubris. Unfortunately attaching questionable braze-ons to perfectly good frames since about 2015. With style.

Last edited by scarlson; 02-03-21 at 09:56 PM.
scarlson is offline  
Likes For scarlson:
Old 02-04-21, 06:36 AM
  #3530  
Senior Member
 
Join Date: Feb 2020
Posts: 2,938
Likes: 0
Liked 1,429 Times in 827 Posts
Originally Posted by scarlson
Has anybody got a 16" wheel folding bike I could borrow to test-ride in the Boston area? Like a Brompton or a Dahon, I guess? I have some weird prototype 45/75 R16 radial tires that an engineer on Harvard's fuel mileage championship team gave me. I kind of want to see what they're like on a bicycle, but I have nothing with 16" wheels. I've got nothing in trade, but if you've got a 16" folder and your curiosity is piqued by these weird things, we can both try it out!
You might need to be more specific; there are five 16" sizes ranging from 305 to 349.
oneclick is offline  
Likes For oneclick:
Old 02-06-21, 09:41 AM
  #3531  
Newbie
 
Join Date: Feb 2021
Posts: 16
Likes: 0
Liked 1 Time in 1 Post
Nice
Phillipnamese is offline  
Old 02-06-21, 01:05 PM
  #3532  
Junior Member
 
con50582's Avatar
 
Join Date: Sep 2020
Location: Columbus, GA
Posts: 85

Bikes: Canyon, Giant, Norco, Bottechia, Gitane, Diamant, Scott

Liked 57 Times in 23 Posts
ISO 80s Steel CX frame 52-54

Looking for an 1980s Steel CX frame from 52 to 54cm.

126mm rear and English threaded would be preferred.

Any out there?

Thanks.
con50582 is offline  
Old 02-07-21, 08:58 AM
  #3533  
Newbie
 
Join Date: Jul 2012
Posts: 54
Likes: 0
Liked 2 Times in 1 Post
Looking for this handlebar, Nitto Tsubasa 1. Willing to take its brothers, the 3 and 5 also if you have one laying around. Much appreciated!

wallythewhale is offline  
Old 02-07-21, 12:26 PM
  #3534  
tantum vehi
 
mountaindave's Avatar
 
Join Date: Jul 2008
Location: Flathead Valley, MT
Posts: 4,453

Bikes: More than I care to admit

Liked 1,003 Times in 498 Posts
According to Sutherland's (if I can read the chart correctly), the largest 4 sprockets of a 5s Shimano MF-012 can be used on a 6s Shimano MF-6208. I'm trying to create a 6s 13-32, so...

ISO two Shimano freewheels (ISO):
  1. MF-Z012 5 speed 14-32 (must be 14-17-21-26-32) Purchased
  2. 600 MF-6208 6 speed 13-18 corncob (or some combo that starts out 13-14) Found - thanks, Skip!
Have for trade (all ISO and in used, uncleaned but not disgusting condition):
  1. Suntour Winner 6s 13-24 (13-15-17-19-21-24)
  2. Suntour Perfect 5s 14-28 (14-17-20-24-28)
  3. Suntour ??? 5s 13-30 (13-16-21-26-30)
  4. Shimano MF-Z012 5s 14-28 (14-17-20-24-28)
Left to right:


I also have a decent, but not infinite parts bin; feel free to PM for non-freewheel trades.

Thanks in advance,
David

Last edited by mountaindave; 02-08-21 at 02:11 PM.
mountaindave is offline  
Old 02-07-21, 01:08 PM
  #3535  
Senior Member
 
Join Date: Dec 2005
Posts: 17,373
Liked 7,240 Times in 2,750 Posts
Originally Posted by mountaindave
According to Sutherland's (if I can read the chart correctly), the largest 4 sprockets of a 5s Shimano MF-012 can be used on a 6s Shimano MF-6208. I'm trying to create a 6s 13-32, so...

ISO two Shimano freewheels (ISO):
  1. MF-Z012 5 speed 14-32 (must be 14-17-21-26-32)
  2. 600 MF-6208 6 speed 13-18 corncob (or some combo that starts out 13-14)
Have for trade (all ISO and in used, uncleaned but not disgusting condition):
  1. Suntour Winner 6s 13-24 (13-15-17-19-21-24)
  2. Suntour Perfect 5s 14-28 (14-17-20-24-28)
  3. Suntour ??? 5s 13-30 (13-16-21-26-30)
  4. Shimano MF-Z012 5s 14-28 (14-17-20-24-28)
Left to right:


I also have a decent, but not infinite parts bin; feel free to PM for non-freewheel trades.

Thanks in advance,
David
I don’t have the two free wheels you’re looking for, but I do have a 14-32t 6-speed MF-Z012 I’m glad to send for the cost of mailing:


nlerner is offline  
Old 02-07-21, 01:21 PM
  #3536  
Senior Member
 
Join Date: Aug 2007
Location: Evanston, IL
Posts: 5,235

Bikes: many

Liked 1,468 Times in 811 Posts
Originally Posted by mountaindave
ISO two Shimano freewheels (ISO):
  1. MF-Z012 5 speed 14-32 (must be 14-17-21-26-32)
  2. 600 MF-6208 6 speed 13-18 corncob (or some combo that starts out 13-14)
I have an MF-6208 which came on a recent wheelset, 13-14-15-17-19-21. The smaller five cogs have a Uniglide twist. The 21T has straight teeth. It is completely surplus to my needs. I'm happy to swap something for it, though we should figure out how to each cram two USPS Priority Mail flat rate boxes full...

Skip
__________________
Monti Special
smontanaro is offline  
Old 02-07-21, 01:33 PM
  #3537  
tantum vehi
 
mountaindave's Avatar
 
Join Date: Jul 2008
Location: Flathead Valley, MT
Posts: 4,453

Bikes: More than I care to admit

Liked 1,003 Times in 498 Posts
Originally Posted by nlerner
I don’t have the two free wheels you’re looking for, but I do have a 14-32t 6-speed MF-Z012 I’m glad to send for the cost of mailing:
I appreciate the offer, but the sprockets I require must contain 17-21-26-32. This is for a half-step drivetrain, hence the specific needs.
mountaindave is offline  
Old 02-07-21, 01:33 PM
  #3538  
tantum vehi
 
mountaindave's Avatar
 
Join Date: Jul 2008
Location: Flathead Valley, MT
Posts: 4,453

Bikes: More than I care to admit

Liked 1,003 Times in 498 Posts
Originally Posted by smontanaro
I have an MF-6208 which came on a recent wheelset, 13-14-15-17-19-21. The smaller five cogs have a Uniglide twist. The 21T has straight teeth. It is completely surplus to my needs. I'm happy to swap something for it, though we should figure out how to each cram two USPS Priority Mail flat rate boxes full...
Emailed
mountaindave is offline  
Old 02-07-21, 08:51 PM
  #3539  
HMJ
Long time part timer
 
Join Date: Nov 2020
Posts: 100
Liked 44 Times in 26 Posts
ISO: Raleigh / Suntour 7 GT RD (or similar)

Greetings,

I am trying to replace the RD below. Before I go to ebay or elsewhere I thought I'd ask if anyone here has something laying around. Although it is going on a late 70's Raleigh (5-speed, friction shift) I'm not too concerned about it being Raleigh branded or even the same type - however if possible I'd like to replace it with another Suntour that is at least somewhat period correct looking. It does need to have a longer cage though (large cog = 34T, total capacity = 30T).

Many thanks in advance!

HMJ is offline  
Old 02-08-21, 12:43 AM
  #3540  
tantum vehi
 
mountaindave's Avatar
 
Join Date: Jul 2008
Location: Flathead Valley, MT
Posts: 4,453

Bikes: More than I care to admit

Liked 1,003 Times in 498 Posts
Originally Posted by HMJ
Greetings,

I am trying to replace the RD below...
You've got yourself a Raleigh-branded SunTour Seven RD. See Disraeli Gears for some good info. You could go for just a plain Seven, but I wouldn't hesitate to upgrade to a V GT or even a V GT Luxe. They are ridiculously reliable and as such still exist in good numbers. The only "reason" someone would get rid of one is because they might find indexing to be a thing.

I personally put a V GT Luxe on my "gas pipe" 5s Ross Eurotour with a Shimano FFS (it's cool to shift while coasting!). It replaced a Shimano Eagle POS that came in at about two times the weight. The Bob Ross has never shifted so well and makes happy little sounds when I ride.

You owe it to yourself to put a fine SunTour on your Raleigh. If you find one, be sure that it has a claw (if that is what your frame requires) - the mounting bolts are different for a claw and an integrated derailleur hanger: Suntour V-Gt and V-GT Luxe
mountaindave is offline  
Likes For mountaindave:
Old 02-08-21, 08:14 AM
  #3541  
www.theheadbadge.com
 
cudak888's Avatar
 
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,602

Bikes: https://www.theheadbadge.com

Liked 4,535 Times in 2,141 Posts
Have a pair of Shimano Exage Motion BR-8250 single pivot sidepulls - recessed mount - that [MENTION=17926]unworthy1[/MENTION] gave to me for the Velo Yellow project. In the meantime, I did find dual pivots for all three bikes, so went that route - leaving me with these calipers.

In the spirit they were given, yours for cost of shipping. Recessed mount, 39-49mm reach. Can ship with the arms off the posts to keep the cost down.








-Kurt
__________________












cudak888 is offline  
Old 02-08-21, 11:12 AM
  #3542  
HMJ
Long time part timer
 
Join Date: Nov 2020
Posts: 100
Liked 44 Times in 26 Posts
Originally Posted by mountaindave
You've got yourself a Raleigh-branded SunTour Seven RD. See Disraeli Gears for some good info. You could go for just a plain Seven, but I wouldn't hesitate to upgrade to a V GT or even a V GT Luxe. They are ridiculously reliable and as such still exist in good numbers. The only "reason" someone would get rid of one is because they might find indexing to be a thing.

I personally put a V GT Luxe on my "gas pipe" 5s Ross Eurotour with a Shimano FFS (it's cool to shift while coasting!). It replaced a Shimano Eagle POS that came in at about two times the weight. The Bob Ross has never shifted so well and makes happy little sounds when I ride.

You owe it to yourself to put a fine SunTour on your Raleigh. If you find one, be sure that it has a claw (if that is what your frame requires) - the mounting bolts are different for a claw and an integrated derailleur hanger: Suntour V-Gt and V-GT Luxe
Yeah, I was able to identify the model from the disraeligears site. A very good resource for sure!

Not that I am even close to being a chef but I am kind of treating this like I would missing an ingredient for a recipe: do I really want to run out to a gourmet food store and spend a few bucks on some high end spice to make the dish "right"? Or would I be OK with just making do with other more standard off the shelf stuff? I already dug through my pantry to find something close that might work well enough but sadly all I found were short cages...which looked "expired" anyhow

Thanks for the positive comments about the V-GT/ V-GT Luxe. I was looking at those as an option also.
HMJ is offline  
Old 02-08-21, 11:13 AM
  #3543  
Stop reading my posts!
 
unworthy1's Avatar
 
Join Date: Sep 2004
Posts: 12,769
Liked 1,190 Times in 873 Posts
Originally Posted by HMJ
Greetings,

I am trying to replace the RD below. Before I go to ebay or elsewhere I thought I'd ask if anyone here has something laying around. Although it is going on a late 70's Raleigh (5-speed, friction shift) I'm not too concerned about it being Raleigh branded or even the same type - however if possible I'd like to replace it with another Suntour that is at least somewhat period correct looking. It does need to have a longer cage though (large cog = 34T, total capacity = 30T).

Many thanks in advance!

I think I have a Suntour Seven, I will check that it has the "claw" and get back to this post, If it's good to go you can have it for cost of postage.
unworthy1 is offline  
Old 02-08-21, 11:16 AM
  #3544  
HMJ
Long time part timer
 
Join Date: Nov 2020
Posts: 100
Liked 44 Times in 26 Posts
thanks for looking!

Originally Posted by unworthy1
I think I have a Suntour Seven, I will check that it has the "claw" and get back to this post, If it's good to go you can have it for cost of postage.
Thanks very much! Please do shoot me a PM with what you find. I would gladly cover postage for it!
HMJ is offline  
Old 02-08-21, 01:30 PM
  #3545  
Stop reading my posts!
 
unworthy1's Avatar
 
Join Date: Sep 2004
Posts: 12,769
Liked 1,190 Times in 873 Posts
Originally Posted by HMJ
Thanks very much! Please do shoot me a PM with what you find. I would gladly cover postage for it!
HMJ: good news/bad news (and sharing the news so others may benefit):
Bad news: I do have a SunTour Seven BUT it won't be good for your needs because it's not a long-cage. However if somebody ELSE wants one. standard cage, I will make the same offer (free but you cover shipping) but NOTE this one needs a hanger claw and that claw is missing (it DOES have the "jam-nut" that locks the claw in place), everything else is there including a little rust (no charge for rust!).

Now for the consolation prize: I also have a V-GT in Okay condition, a better RD than the Seven, it's a long cage but also missing the hanger claw (and HAS the jam-nut). Since this is worth more to both me and the public (even in the not-pristine condition)I would like to trade something for it. I believe I have a pic from a previous post, LMK if you are interested, if not then it's (still) up for grabs and so is the Mountech FD:
EDIT: I have cleaned up and lubed the VGT RD and it looks better now, plus did the same to the Seven and it's practically rust-free and gleaming like a chrome-plated steel RD, just as you'd think. Now I'm not so sure about letting this Seven go for free, but willing to trade for something modest: I need some black grips to fit Mtn Bike bars, a female-spec black saddle, mounting strip and nuts/bolts for a Blackburn style rear rack. Might be cleaning up that FD next and will include it in the deal if/as desired.

Last edited by unworthy1; 02-09-21 at 11:10 AM.
unworthy1 is offline  
Old 02-08-21, 04:34 PM
  #3546  
Senior Member
 
Join Date: Feb 2020
Posts: 2,938
Likes: 0
Liked 1,429 Times in 827 Posts
Have campy 32h front hub, want 36h

I have a nice user NR hub, pics in the c&v sales forum.
oneclick is offline  
Old 02-08-21, 06:38 PM
  #3547  
HMJ
Long time part timer
 
Join Date: Nov 2020
Posts: 100
Liked 44 Times in 26 Posts
let's try...

Originally Posted by unworthy1
HMJ: good news/bad news (and sharing the news so others may benefit):
Bad news: I do have a SunTour Seven BUT it won't be good for your needs because it's not a long-cage. However if somebody ELSE wants one. standard cage, I will make the same offer (free but you cover shipping) but NOTE this one needs a hanger claw and that claw is missing (it DOES have the "jam-nut" that locks the claw in place), everything else is there including a little rust (no charge for rust!).

Now for the consolation prize: I also have a V-GT in Okay condition, a better RD than the Seven, it's a long cage but also missing the hanger claw (and HAS the jam-nut). Since this is worth more to both me and the public (even in the not-pristine condition)I would like to trade something for it. I believe I have a pic from a previous post, LMK if you are interested, if not then it's (still) up for grabs and so is the Mountech FD:
Thanks much for the update! I'm not sure how much I have for trade but PM sent
HMJ is offline  
Old 02-08-21, 10:08 PM
  #3548  
Senior Member
 
scarlson's Avatar
 
Join Date: Jun 2010
Location: Medford MA
Posts: 2,089

Bikes: Ron Cooper touring, 1959 Jack Taylor 650b ladyback touring tandem, Vitus 979, Joe Bell painted Claud Butler Dalesman, Colin Laing curved tube tandem, heavily-Dilberted 1982 Trek 6xx, René Herse tandem

Liked 1,453 Times in 723 Posts
Originally Posted by oneclick
You might need to be more specific; there are five 16" sizes ranging from 305 to 349.
You are right. Although the tires' sizes (being radials) are designated 16" like car tires (R16), they are mounted on 20" bike wheels (ETRTO 406). So I guess I actually need a Raleigh twenty or similar. Heck I'd make a trade deal for some bike stuff if someone has one they want to get rid of. I will also check how easy it is to mount and dismount these tires. The sidewalls feel super lightweight and flexible like Compass/René Herse, and they have really flat tread like a car radial. Should be an interesting ride if I can find a folder to slap them on.
__________________
Owner & co-founder, Cycles René Hubris. Unfortunately attaching questionable braze-ons to perfectly good frames since about 2015. With style.
scarlson is offline  
Old 02-09-21, 09:06 PM
  #3549  
Mr. Anachronism
 
Hudson308's Avatar
 
Join Date: Jan 2013
Location: Somewhere west of Tobie's
Posts: 2,087

Bikes: fillet-brazed Chicago Schwinns, and some other stuff

Liked 257 Times in 166 Posts
WTB 60's Schwinn Super Sport frameset

Hi, guys;

I'm looking for a mid-60's Schwinn Super Sport (or Superior) frameset. Easy to spot with the chrome fork, downtube shifter braze-ons and integral RD hanger.
Need 24" as measured from center of BB shell to center of top tube. Would prefer rough paint so I don't feel guilty refinishing, but no dents/bends/cracks please.
Whatcha got?
__________________
"My only true wisdom is in knowing I have none" -Socrates
Hudson308 is offline  
Old 02-09-21, 10:44 PM
  #3550  
Senior Member
 
Join Date: Oct 2014
Location: Pico Rivera, CA
Posts: 4,219

Bikes: 1983 Basso Gap...2013 Colnago CX-1...2015 Bianchi Intenso

Liked 1,386 Times in 731 Posts
ISO: Campagnolo Super Record brake levers with or without hoods.

For trade: any of my sale items.
bfuser10291295 is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Your Privacy Choices -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.