ISO and for trade thread part 5
#5101
Old bikes, Older guy
Join Date: Jun 2014
Location: Fiscal Conservative on the Lefty Coast - Oregon
Posts: 658
Bikes: A few modern, Several vintage, All ridden when weather allows.
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 174 Post(s)
Liked 69 Times
in
51 Posts
ISO Shimano labeled orphaned bar end shifter.
Hi folks,
I'm looking for a single Shimano labeled bar end shifter. Nothing special, just something functional. I'll be using it on the left side for either 2 or 3 chain rings depending on how the build goes. It will be mated with an 8 speed STI shifter on a rando style build I'm planning for a winter project.
Trade bits: a nice set of Huret DT shifters for braze-on mounting plus a bunch of vintage derailleurs, both Suntour & Shimano. Sorry, the only Cranes I have are either mangled or non-functional.
Cheers,
Van
I'm looking for a single Shimano labeled bar end shifter. Nothing special, just something functional. I'll be using it on the left side for either 2 or 3 chain rings depending on how the build goes. It will be mated with an 8 speed STI shifter on a rando style build I'm planning for a winter project.
Trade bits: a nice set of Huret DT shifters for braze-on mounting plus a bunch of vintage derailleurs, both Suntour & Shimano. Sorry, the only Cranes I have are either mangled or non-functional.
Cheers,
Van
__________________
Remember: Real bikes have pedals.
...and never put a yellow tail on a Red, White and Blue kite!
Remember: Real bikes have pedals.
...and never put a yellow tail on a Red, White and Blue kite!
#5102
Full Member
Join Date: Sep 2021
Location: SW Florida
Posts: 265
Bikes: Yes
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 93 Post(s)
Likes: 0
Liked 84 Times
in
55 Posts
Gipiemme Special 32H QR 100mm OLD Front Hub
Ran across this on eBay, and thought I'd post the info as someone here might be looking for one. Appears to be in good shape in photos. Obviously can't speak for cups/cones (no photos of item disassembled). No QR skewer included, unfortunately.
https://www.ebay.com/itm/255658225889
Cost is around $21 plus sales taxes, shipped (US address; shipping does vary somewhat with distance). The vendor also ships internationally, but shipping cost is much higher.
I have no commercial interest in the vendor (they're a charity). I have done business with them; they seem reliable. They do not accept offers of less than minimum starting bid.
Auction closes tomorrow at 1:42PM EDT. Vendor routinely re-lists items that don't sell at auction.
https://www.ebay.com/itm/255658225889
Cost is around $21 plus sales taxes, shipped (US address; shipping does vary somewhat with distance). The vendor also ships internationally, but shipping cost is much higher.
I have no commercial interest in the vendor (they're a charity). I have done business with them; they seem reliable. They do not accept offers of less than minimum starting bid.
Auction closes tomorrow at 1:42PM EDT. Vendor routinely re-lists items that don't sell at auction.
#5103
Full Member
Join Date: Mar 2015
Location: Texas panhandle
Posts: 454
Bikes: 1986 Schwinn Passage, 1987 Shogun Katana, 2018 Giant Anyroad Advanced, 2013 Karate Monkey
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 111 Post(s)
Liked 87 Times
in
36 Posts
Hi folks,
I'm looking for a single Shimano labeled bar end shifter. Nothing special, just something functional. I'll be using it on the left side for either 2 or 3 chain rings depending on how the build goes. It will be mated with an 8 speed STI shifter on a rando style build I'm planning for a winter project.
Trade bits: a nice set of Huret DT shifters for braze-on mounting plus a bunch of vintage derailleurs, both Suntour & Shimano. Sorry, the only Cranes I have are either mangled or non-functional.
Cheers,
Van
I'm looking for a single Shimano labeled bar end shifter. Nothing special, just something functional. I'll be using it on the left side for either 2 or 3 chain rings depending on how the build goes. It will be mated with an 8 speed STI shifter on a rando style build I'm planning for a winter project.
Trade bits: a nice set of Huret DT shifters for braze-on mounting plus a bunch of vintage derailleurs, both Suntour & Shimano. Sorry, the only Cranes I have are either mangled or non-functional.
Cheers,
Van
#5104
Full Member
Join Date: Mar 2021
Location: SoCal
Posts: 423
Bikes: 1988 "Pinalized Rockma", 1983 Trek 720, 1984 Trek 510, PK Ripper 29'er, Schwinn Circuit, Bianchi Strada, 1980's Peugeot - City, US & Canyon Express & Pipeline VI (6), Centurion RS Elite
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 120 Post(s)
Liked 310 Times
in
193 Posts
1973 Raleigh Supercourse
Available for trade:
You might have seen this in the "Craigslist finds - are you looking for one of these?" thread or the "Saved from the Dump/ Catch of the day thread" Well it is making it's rounds and has landed here at ISO for trade. If no one local has a trade handy, it will make it's way to "Pay it Forward". Bike is available to anyone who can pick-up in San Pedro, CA (South LA) - no shipping.
Couldn't help myself and went and picked this up a few weeks ago. I decided I have too many projects (and not enough room) to take this one on. As far as trade, not looking for a lot, I got the bike for free. My total investment is about $20 in gas, hour and a half of my time for pick-up and a few hours of getting started cleaning rust off the chrome and metal bits. Things I could use in trade? saddle(s), bike tools, seatpost bolt 8mm x 22mm, pedals, front rack(s), True a wheel for me? or whatever you might have? (parts, no room for more bikes)
The Good: 1973 Raleigh Supercourse - Carlton - 531 frame - Capella lugs - Complete bike
The Bad: Cracks on welds on the caps of seat stays (apparently a common Raleigh problem?), Paint is beat-up, grime and rust (I got started, crank cleaned up nicely, but plenty left), mis-matched rims
Happy to answer any questions
I will link to an album of pictures:

https://www.bikeforums.net/g/album/25935920
You might have seen this in the "Craigslist finds - are you looking for one of these?" thread or the "Saved from the Dump/ Catch of the day thread" Well it is making it's rounds and has landed here at ISO for trade. If no one local has a trade handy, it will make it's way to "Pay it Forward". Bike is available to anyone who can pick-up in San Pedro, CA (South LA) - no shipping.
Couldn't help myself and went and picked this up a few weeks ago. I decided I have too many projects (and not enough room) to take this one on. As far as trade, not looking for a lot, I got the bike for free. My total investment is about $20 in gas, hour and a half of my time for pick-up and a few hours of getting started cleaning rust off the chrome and metal bits. Things I could use in trade? saddle(s), bike tools, seatpost bolt 8mm x 22mm, pedals, front rack(s), True a wheel for me? or whatever you might have? (parts, no room for more bikes)
The Good: 1973 Raleigh Supercourse - Carlton - 531 frame - Capella lugs - Complete bike
The Bad: Cracks on welds on the caps of seat stays (apparently a common Raleigh problem?), Paint is beat-up, grime and rust (I got started, crank cleaned up nicely, but plenty left), mis-matched rims
Happy to answer any questions
I will link to an album of pictures:

https://www.bikeforums.net/g/album/25935920
Last edited by SoCaled; 08-08-22 at 11:56 AM.
#5105
Stop reading my posts!
Join Date: Sep 2004
Posts: 11,923
Mentioned: 73 Post(s)
Tagged: 0 Thread(s)
Quoted: 985 Post(s)
Liked 504 Times
in
413 Posts
Hi folks,
I'm looking for a single Shimano labeled bar end shifter. Nothing special, just something functional. I'll be using it on the left side for either 2 or 3 chain rings depending on how the build goes. It will be mated with an 8 speed STI shifter on a rando style build I'm planning for a winter project.
Trade bits: a nice set of Huret DT shifters for braze-on mounting plus a bunch of vintage derailleurs, both Suntour & Shimano. Sorry, the only Cranes I have are either mangled or non-functional.
Cheers,
Van
I'm looking for a single Shimano labeled bar end shifter. Nothing special, just something functional. I'll be using it on the left side for either 2 or 3 chain rings depending on how the build goes. It will be mated with an 8 speed STI shifter on a rando style build I'm planning for a winter project.
Trade bits: a nice set of Huret DT shifters for braze-on mounting plus a bunch of vintage derailleurs, both Suntour & Shimano. Sorry, the only Cranes I have are either mangled or non-functional.
Cheers,
Van
And NOT the older Shimano barcon that looks more like a SunTour or Campy unit, and had the coil-spring sort of fake 'retrofriction' feature?
There's a slight chance I have one of the modern jobbers, but will take a spell for me to look and see.
#5106
Full Member
Join Date: Mar 2015
Location: Texas panhandle
Posts: 454
Bikes: 1986 Schwinn Passage, 1987 Shogun Katana, 2018 Giant Anyroad Advanced, 2013 Karate Monkey
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 111 Post(s)
Liked 87 Times
in
36 Posts
Hi folks,
I'm looking for a single Shimano labeled bar end shifter. Nothing special, just something functional. I'll be using it on the left side for either 2 or 3 chain rings depending on how the build goes. It will be mated with an 8 speed STI shifter on a rando style build I'm planning for a winter project.
Trade bits: a nice set of Huret DT shifters for braze-on mounting plus a bunch of vintage derailleurs, both Suntour & Shimano. Sorry, the only Cranes I have are either mangled or non-functional.
Cheers,
Van
I'm looking for a single Shimano labeled bar end shifter. Nothing special, just something functional. I'll be using it on the left side for either 2 or 3 chain rings depending on how the build goes. It will be mated with an 8 speed STI shifter on a rando style build I'm planning for a winter project.
Trade bits: a nice set of Huret DT shifters for braze-on mounting plus a bunch of vintage derailleurs, both Suntour & Shimano. Sorry, the only Cranes I have are either mangled or non-functional.
Cheers,
Van
#5107
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 4,459
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 27 Post(s)
Tagged: 0 Thread(s)
Quoted: 1420 Post(s)
Liked 1,323 Times
in
917 Posts
Hi folks,
I'm looking for a single Shimano labeled bar end shifter. Nothing special, just something functional. I'll be using it on the left side for either 2 or 3 chain rings depending on how the build goes. It will be mated with an 8 speed STI shifter on a rando style build I'm planning for a winter project.
Trade bits: a nice set of Huret DT shifters for braze-on mounting plus a bunch of vintage derailleurs, both Suntour & Shimano. Sorry, the only Cranes I have are either mangled or non-functional.
Cheers,
Van
I'm looking for a single Shimano labeled bar end shifter. Nothing special, just something functional. I'll be using it on the left side for either 2 or 3 chain rings depending on how the build goes. It will be mated with an 8 speed STI shifter on a rando style build I'm planning for a winter project.
Trade bits: a nice set of Huret DT shifters for braze-on mounting plus a bunch of vintage derailleurs, both Suntour & Shimano. Sorry, the only Cranes I have are either mangled or non-functional.
Cheers,
Van
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1980s Vanni Losa Cassani thingy, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981? Faggin, Cannondale M500, etc...Need to do an N -1...
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1980s Vanni Losa Cassani thingy, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981? Faggin, Cannondale M500, etc...Need to do an N -1...
#5108
Old bikes, Older guy
Join Date: Jun 2014
Location: Fiscal Conservative on the Lefty Coast - Oregon
Posts: 658
Bikes: A few modern, Several vintage, All ridden when weather allows.
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 174 Post(s)
Liked 69 Times
in
51 Posts
Hi folks,
Sorry for the confusion. I got the 8 speed indexing bar end from a friend who asked me to upgrade a Cannondale that he got cheap. It had bull horn bars on it that he wanted to keep, but update to a 10 X 2. As purchased, it had the bar end on the right & cheapo thumb shifter on the left.
The newer, the better. Just looking for someone’s left overs.
Cheers,
Van
Sorry for the confusion. I got the 8 speed indexing bar end from a friend who asked me to upgrade a Cannondale that he got cheap. It had bull horn bars on it that he wanted to keep, but update to a 10 X 2. As purchased, it had the bar end on the right & cheapo thumb shifter on the left.
The newer, the better. Just looking for someone’s left overs.
Cheers,
Van
__________________
Remember: Real bikes have pedals.
...and never put a yellow tail on a Red, White and Blue kite!
Remember: Real bikes have pedals.
...and never put a yellow tail on a Red, White and Blue kite!
#5109
Senior Member
Join Date: Feb 2020
Posts: 1,960
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 734 Post(s)
Likes: 0
Liked 769 Times
in
466 Posts
118 BCD (SR) chainrings
I have a nice-ish Raleigh branded pair of cranks and a nice-ish Raleigh Supercourse for them to go on - but no rings.
I'd probably take anything as long as the teeth are decent...
I'd probably take anything as long as the teeth are decent...