ISO and for trade thread part 5
09-17-23, 08:05 AM
#6176
Senior Member
Join Date: Mar 2007
Location: SF Bay Area, East bay
Posts: 8,468
Bikes: Miyata 618 GT, Marinoni, Kestral 200 2002 Trek 5200, KHS Flite, Koga Miyata, Schwinn Spitfire 5, Mondia Special, Univega Alpina, Miyata team Ti, Santa Cruz Highball
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
Quoted: 1510 Post(s)
Liked 2,205 Times
in
1,072 Posts
I suspect it's a side benefit of the mountain bike revolution. People started riding in crappy conditions (I read somewhere that the Repack Riders got their name from having to repack their bearings on a more-or-less daily basis), so seals began to be really useful to extend the life of bearings and increase maintenance intervals. Early mountain bikes used 1-inch threaded headsets, which work perfectly well on road bikes.
I bought a SunTour Superbe headset for my not-quite-full-Superbe Griffon, but I could never get it adjusted properly (out-of-spec? incompetent mechanic?). I replaced it with one of these Specialized seal-equipped headsets and have experienced no issues.
I bought a SunTour Superbe headset for my not-quite-full-Superbe Griffon, but I could never get it adjusted properly (out-of-spec? incompetent mechanic?). I replaced it with one of these Specialized seal-equipped headsets and have experienced no issues.
Likes For curbtender:
09-17-23, 11:26 AM
#6177
WGB
Join Date: Jul 2017
Location: Niagara Region
Posts: 5,491
Bikes: Panasonic PT-4500
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1734 Post(s)
Liked 2,147 Times
in
1,297 Posts
Looking for a 40 hole rear hub. Prefer cassette but can do a freewheel hub. I have some NOS rims to build up
Probably cash would be best but have some trading stuff, just need to know what you need.
Probably cash would be best but have some trading stuff, just need to know what you need.
09-18-23, 03:47 AM
#6178
Senior Member
Join Date: Feb 2020
Posts: 2,729
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1035 Post(s)
Likes: 0
Liked 1,208 Times
in
716 Posts
Want 52t Maxy chainring/ring+arm
I'm building a 24" wheel bike, have a Maxy with the replaceable large ring - but it's only 45t (small is 40).
So I'm looking for a BIG big with good teeth, I can use a swaged-ring+arm, even one with a bad square, as I'll just cut the ring out out.
So I'm looking for a BIG big with good teeth, I can use a swaged-ring+arm, even one with a bad square, as I'll just cut the ring out out.
Last edited by oneclick; 09-18-23 at 03:58 AM.
09-18-23, 07:01 PM
#6179
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,734
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3484 Post(s)
Liked 3,150 Times
in
1,806 Posts
09-19-23, 06:34 AM
#6181
Phyllo-buster
Join Date: Jan 2010
Location: Nova Scotia
Posts: 8,791
Bikes: roadsters, club bikes, fixed and classic
Mentioned: 131 Post(s)
Tagged: 0 Thread(s)
Quoted: 2274 Post(s)
Liked 1,980 Times
in
1,222 Posts
Suntour XC Pro and some Mavics methinks
Likes For clubman:
09-20-23, 07:27 AM
#6182
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,734
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3484 Post(s)
Liked 3,150 Times
in
1,806 Posts
Likes For JohnDThompson:
09-21-23, 08:35 AM
#6184
Senior Member
Join Date: Mar 2021
Location: Beaverton, OR
Posts: 1,373
Bikes: You had me at rusty and Italian!!
Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 538 Post(s)
Liked 942 Times
in
496 Posts
Looking for a set of Super Champion model 58 rims in very good or better condition. 32h, 700c, clincher. Hubs not needed.
I would consider Weinmann Concaves in the same configuration/condition.
Thx!
I would consider Weinmann Concaves in the same configuration/condition.
Thx!
09-21-23, 05:55 PM
#6185
Full Member
Join Date: Feb 2011
Location: Minneapolis
Posts: 278
Bikes: 1988 Specialized Rockhopper Comp, 2012 Goodrich Randoneuse, 2016 A-Train, 2022 Wilde Dream Engine, 2022 Salsa Mukluk
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 59 Post(s)
Liked 86 Times
in
34 Posts
Perhaps a rare bird, but I am looking for a Suzue Classica rear cassette hub drilled for 36 holes.
Thanks!
Thanks!
09-21-23, 06:29 PM
#6187
Full Member
Join Date: Feb 2011
Location: Minneapolis
Posts: 278
Bikes: 1988 Specialized Rockhopper Comp, 2012 Goodrich Randoneuse, 2016 A-Train, 2022 Wilde Dream Engine, 2022 Salsa Mukluk
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 59 Post(s)
Liked 86 Times
in
34 Posts
09-21-23, 06:43 PM
#6188
Senior Member
Join Date: Aug 2007
Location: Evanston, IL
Posts: 5,749
Bikes: many
Mentioned: 61 Post(s)
Tagged: 0 Thread(s)
Quoted: 1397 Post(s)
Liked 1,232 Times
in
690 Posts
They are very handsome hubs. I like the "bacon slicer" look, but it seems to almost always to appear in track hub form, which doesn't do me much good.
09-23-23, 10:52 AM
#6189
Full Member
Join Date: Feb 2011
Location: Minneapolis
Posts: 278
Bikes: 1988 Specialized Rockhopper Comp, 2012 Goodrich Randoneuse, 2016 A-Train, 2022 Wilde Dream Engine, 2022 Salsa Mukluk
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 59 Post(s)
Liked 86 Times
in
34 Posts
I hope I can find a match. I like the look a lot. I've always liked the look of these and while there doesn't seem to be a lot written out there, they do seem like they work well. This will go on my 3Rensho Sequoia if the rear pans out which works out as that's a slow-burner project for the time being.
09-23-23, 02:51 PM
#6190
Senior Member
09-25-23, 12:45 PM
#6191
Full Member
English wheels and mudguards
Looking for a Bluemels Front Club Special "Mudguard" in black. 27"/700c size. They are 4cm wide but another model with the same rain gutter shape would be fine up to 5.5cm wide. used condition is preferred but no cracks or chips please.
ALSO...
Looking for a Dunlop Special Lightweight chrome 27" 40 hole rim with standing nipple holes in very good to excellent condition.
ALSO...
Bluemels "Mudguard" set in cream, brown, gold, silver or Champaign color 26" size. Used condition is fine but no cracks or chips.
ALSO...
Dunlop Special Lightweight wheelset in 26" 590 preferred but 597 might do. Very good to excellent condition.
ALSO...
Looking for a Dunlop Special Lightweight chrome 27" 40 hole rim with standing nipple holes in very good to excellent condition.
ALSO...
Bluemels "Mudguard" set in cream, brown, gold, silver or Champaign color 26" size. Used condition is fine but no cracks or chips.
ALSO...
Dunlop Special Lightweight wheelset in 26" 590 preferred but 597 might do. Very good to excellent condition.
09-25-23, 11:59 PM
#6192
Senior Member
Long shot but I have a 1983 58cm Univega Specialissima (a Miyata 1000 by another name) and would love to trade it for the same in a smaller size.
Likes For abdon:
09-26-23, 09:50 AM
#6193
buy my bikes
Join Date: Jun 2014
Location: Michigan
Posts: 1,738
Bikes: my very own customized GUNNAR CrossHairs
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 499 Post(s)
Liked 369 Times
in
223 Posts
I'm contemplating putting up my hack-job painted Miayata OneThousand up for sale. It's a 56cm and presently set up as a kind of foul weather 2-speed kick pack let's go ride everywhere upright ish .... super something. (but not as super a the new SKLAR! SuperSomething!)
I'm not looking to trade though, more of a de-stable-ize the herd, so I can get a properly sized RoadUNO next spring.
09-26-23, 11:56 AM
#6194
Senior Member
I would be looking at 54cm or a tad smaller. I'm not looking to buy, I would just take an opportunity to trade for something I can ride.
Here's a pic, bike dry stock
Here's a pic, bike dry stock
Likes For abdon:
09-26-23, 02:20 PM
#6195
Newbie
lf replacement touring fork for bridgestone RB-T - 700c, 1" threaded, cantilever, 215mm+ steerer tube, 45mm offset ....... not too picky about the color. Was bent in a crash and cant seem to find a suitable replacement on ebay nor locally! Thanks
10-02-23, 07:39 PM
#6196
"part timer"
Join Date: Oct 2008
Location: Tidewater VA
Posts: 621
Bikes: 1975 Raleigh Gran Sport, 1978 Bertin C35, 1982 Trek 614, 1983 Trek 620, 1984 Nishiki Seral, 1995 Mercian Ko’M, 1998 Fisher HKEK, 2000 Rivendell RS, 2001 Heron Touring, 2016 Nobilette Custom
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 113 Post(s)
Liked 159 Times
in
60 Posts
Not exactly a vintage thing, but I figured you all would be the folks to ask.
I recently put a pair of Gravelkings on my touring bike that I had squirreled away for when the Paselas finally wore out. With less than 100 miles on them, I ran over a piece of metal and trashed one. As it turns out, this color (‘Bordeaux”) was a limited edition and is no longer available anywhere that I can find. Live and learn, I guess…
So anyway, would anyone have one of these in this color laying around that they’d be willing to part with? I’m looking for a 700x35 slick. Top dollar or I have stuff to trade. Otherwise, I’ll be buying two new tires.
Thanks!
I recently put a pair of Gravelkings on my touring bike that I had squirreled away for when the Paselas finally wore out. With less than 100 miles on them, I ran over a piece of metal and trashed one. As it turns out, this color (‘Bordeaux”) was a limited edition and is no longer available anywhere that I can find. Live and learn, I guess…
So anyway, would anyone have one of these in this color laying around that they’d be willing to part with? I’m looking for a 700x35 slick. Top dollar or I have stuff to trade. Otherwise, I’ll be buying two new tires.
Thanks!
10-02-23, 08:17 PM
#6197
Full Member
If you are still looking, I might be able to help. I make my own chainrings -- well, not all of them, but when I need something rare to unavailable, I CNC it. If you can tell me the bolt pattern, tooth count, chain pitch, preferred material, and the required interior clearance, I can cut one for you.
Likes For TC1:
10-04-23, 06:30 PM
#6198
Not lost wanderer.
Join Date: Jan 2013
Location: Lititz, Pa
Posts: 3,320
Bikes: In USA; 73 Raleigh Super Course dingle speed, 72 Raleigh Gran Sport SS, 72 Geoffry Butler, 81 Centurion Pro-Tour, 74 Gugie Grandier Sportier
Mentioned: 71 Post(s)
Tagged: 0 Thread(s)
Quoted: 878 Post(s)
Liked 936 Times
in
495 Posts
Iso
ISO 170mm Raleigh branded NDS SR crank arm to go with the 170 DS I have.
I have 165 version
I have 165 version
__________________
Cambodia bikes, Bridgestone SRAM 2 speed, 2012 Fuji Stratos...
Cambodia bikes, Bridgestone SRAM 2 speed, 2012 Fuji Stratos...
10-08-23, 06:22 PM
#6199
Senior Member
Join Date: Aug 2020
Location: Saratoga, CA
Posts: 743
Bikes: 1981 Bianchi Specialissim, 1976 Colnago Super. 1971 Bob Jackson. 2012 Kestrel 4000. 2012 Willier. 2016 Fuji Cross 1.1
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 256 Post(s)
Liked 779 Times
in
328 Posts
In search of a Chater Lea headclip and top nut (no really a nut, but not sure what to call it. My understanding is most of these are pre-war but they were used until the 50’s.
From velobase:
From velobase:
10-10-23, 11:06 PM
#6200
tantum vehi
Join Date: Jul 2008
Location: Flathead Valley, MT
Posts: 4,509
Bikes: More than I care to admit
Mentioned: 151 Post(s)
Tagged: 0 Thread(s)
Quoted: 1154 Post(s)
Liked 881 Times
in
460 Posts
ISO 48t 110 BCD shark tooth ring
I’m looking for a silver 48t 110 BCD shark tooth ring you want to get rid of. Not a good one, a bad one you want to let someone up-cycle into a chain guard. I have bits to trade, but if it’s hanging around (literally) and you’re about to throw it out and you want someone to pay for shipping to get rid of it for you, I’m your guy!
Here’s my process:
Here’s my process:
Last edited by mountaindave; 10-11-23 at 06:08 AM.
