Go Back  Bike Forums > Bike Forums > Classic & Vintage
Reload this Page >

ISO and for trade thread part 5

Notices
Classic & Vintage This forum is to discuss the many aspects of classic and vintage bicycles, including musclebikes, lightweights, middleweights, hi-wheelers, bone-shakers, safety bikes and much more.

ISO and for trade thread part 5

Old 11-12-18, 05:22 PM
  #751  
Junior Member
 
danarello's Avatar
 
Join Date: Sep 2016
Location: Southern California
Posts: 196

Bikes: 2013 Pinarello FPQuattro Ultegra; 1987 Schwinn Super Sport; 1989 Schwinn Tempo

Liked 3 Times in 2 Posts
ISO Vintage 100-110mm quill stem

I need a 100-110 mm quill stem to try to finish my bike fit for 1987 Schwinn SS. The quill is 22.2 mm and clamp diameter is 25.4. I have an 85 mm Custom quill stem in fair condition. I also am looking for a long 26.6 mm seatpost. I have a Kalloy aluminum setback seatpost. I would like to have a non-setback seatpost.if possible. I also have 2 vintage saddles, one is white, in fair condition if anyone is interested.
danarello is offline  
Old 11-12-18, 06:01 PM
  #752  
Stop reading my posts!
 
unworthy1's Avatar
 
Join Date: Sep 2004
Posts: 12,759
Liked 1,189 Times in 872 Posts
Originally Posted by wesmamyke
What is the model number on that LX crank? M563 or earlier 7spd stuff?
M563 it is. The bike it was on had 8-speed drive.
unworthy1 is offline  
Old 11-13-18, 11:26 AM
  #753  
Senior Member
 
3speedslow's Avatar
 
Join Date: Oct 2010
Location: Jacksonville, NC
Posts: 9,399

Bikes: A few

Liked 1,168 Times in 668 Posts
Originally Posted by danarello
I need a 100-110 mm quill stem to try to finish my bike fit for 1987 Schwinn SS. The quill is 22.2 mm and clamp diameter is 25.4. I have an 85 mm Custom quill stem in fair condition. I also am looking for a long 26.6 mm seatpost. I have a Kalloy aluminum setback seatpost. I would like to have a non-setback seatpost.if possible. I also have 2 vintage saddles, one is white, in fair condition if anyone is interested.
Hey,

Let me get back to the house and I will pull some options for you. PM me your email for pics.

3SS
3speedslow is offline  
Old 11-15-18, 09:27 PM
  #754  
bjn
Newbie
 
Join Date: Nov 2018
Posts: 3
Likes: 0
Liked 0 Times in 0 Posts
I am specifically in search of a Shimano 105 HB-1050 rear hub axle assembly, recently broke mine. Its a 126 mm hub.

TIA

Last edited by bjn; 11-15-18 at 09:33 PM.
bjn is offline  
Old 11-15-18, 09:44 PM
  #755  
Senior Member
 
jeirvine's Avatar
 
Join Date: Sep 2011
Location: Baltimore MD
Posts: 3,338

Bikes: '72 Motobecane Grand Record, '72 Gitane tandem, '72 Raleigh Super Course, '73 Raleigh Gran Sport, '73 Colnago Super, '76 Fiorelli Coppi, '78 Raleigh SBDU Team Pro, '78 Trek 930, '81 Holdsworth Special 650B, '86 Masi GC, ’94 Bridgestone RB-T

Liked 526 Times in 284 Posts
Originally Posted by bjn
I am specifically in search of a Shimano 105 HB-1050 rear hub axle assembly, recently broke mine. Its a 126 mm hub.
TIA
I have a 1055 hub in 7 speed, 126, 36 holes. Let me know if that would be of interest. Or do you just need the axle?
__________________
The man who dies with the most toysÖis dead. - Rootboy
jeirvine is offline  
Old 11-15-18, 10:20 PM
  #756  
bjn
Newbie
 
Join Date: Nov 2018
Posts: 3
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by jeirvine
I have a 1055 hub in 7 speed, 126, 36 holes. Let me know if that would be of interest. Or do you just need the axle?
I just need the axle, but thanks!
bjn is offline  
Old 11-16-18, 09:35 AM
  #757  
Ellensburg, WA
 
scozim's Avatar
 
Join Date: Aug 2008
Location: Lewiston, ID
Posts: 3,768

Bikes: See my signature

Liked 498 Times in 168 Posts
This is probably a long shot but I've got a Stronglight crankset (110/74) that has two Stronglight BioStrong eliptical chainrings on it. A 48t and a 28t. I'd like to find a 38t or 36t BioStrong 110bcd chainring to make this a triple for my errand bike. I've always wanted to try eliptical rings and since the errand bike is French it should have a French crankset too.


__________________
1984 Gitane Tour de France; 1982 Nishiki Marina 12; 1984 Peugeot PSV; 1993 Trek 950 mtb; 1991 GT Karakoram, 1983 Vitus 979; Colnago Super, 1989 Spectrum Titanium,







Last edited by scozim; 11-16-18 at 11:29 AM.
scozim is offline  
Old 11-16-18, 04:47 PM
  #758  
Senior Member
 
Join Date: Oct 2014
Location: Pico Rivera, CA
Posts: 4,219

Bikes: 1983 Basso Gap...2013 Colnago CX-1...2015 Bianchi Intenso

Liked 1,386 Times in 731 Posts
Will trade with [MENTION=365306]nesteel[/MENTION]

Last edited by bfuser10291295; 11-16-18 at 09:09 PM.
bfuser10291295 is offline  
Old 11-17-18, 04:43 PM
  #759  
Sempiternal Newb
 
tiredhands's Avatar
 
Join Date: Dec 2014
Location: Panama City, FL
Posts: 637

Bikes: '92 Trek 750, '85 Univega Gran Turismo, '95 Stumpjumper,

Likes: 0
Liked 16 Times in 11 Posts
ISO: a replacement spring for a Suntour Sprint 9000 rear mech. Mine's in two pieces!

tiredhands is offline  
Old 11-17-18, 08:17 PM
  #760  
Newbie
 
Join Date: Jul 2012
Posts: 54
Likes: 0
Liked 2 Times in 1 Post
ISO: Suntour Superbe stem. Preferably in 80-100.
wallythewhale is offline  
Old 11-18-18, 01:07 PM
  #761  
Junior Member
 
Join Date: Jun 2017
Location: Chicago
Posts: 81

Bikes: 1970 Schwinn Continental, 1972 Schwinn Sports Tourer, 1981 Schwinn Paramount, 2011 Polygon Helios 700, 2015 Giant Defy Advanced Pro 0

Likes: 0
Liked 2 Times in 2 Posts
I know this is a long shot (and pretty anal), but Iím looking to complete a 78 Super Record group. Is anyone interested in trading my SR RD from 1985 for their one from 78? My 85 functions perfectly (and has hardly been used), but does have a small scuff - so not that bothered about appearance.

I could also do with the SR levers and Seatpost - at the minute I have the NR versions. I know that wouldnít be a fair trade so have lots of other Campy goodness to sweeten any deal!
frndlyfire is offline  
Old 11-23-18, 08:39 AM
  #762  
Senior Member
 
jcb3's Avatar
 
Join Date: Sep 2014
Location: Irvine, CA
Posts: 604
Likes: 0
Liked 13 Times in 12 Posts
Originally Posted by bjn


I just need the axle, but thanks!
Did you try the local bike shop? Axles are inexpensive and probably about the same price as shipping.
jcb3 is offline  
Old 11-23-18, 09:11 AM
  #763  
What??? Only 2 wheels?
 
jimmuller's Avatar
 
Join Date: Apr 2010
Location: Boston-ish, MA
Posts: 13,439

Bikes: 72 Peugeot UO-8, 82 Peugeot TH8, 87 Bianchi Brava, 76? Masi Grand Criterium, 74 Motobecane Champion Team, 86 & 77 Gazelle champion mondial, 81? Grandis, 82? Tommasini, 83 Peugeot PF10

Liked 663 Times in 236 Posts
Arrgh! Need brake calipers. Decent sidepull, about 54mm reach. Recessed mounting bolts.

Have to trade: essentially NOS Shimano 105, recessed, marked 33 to 39mm.

The target frame is a '77 Gazelle Champion Mondial.

I had picked up the 105's for another bike, ended up not using them, then thought they'd be good on the current build. But noop, not a chance. Some bikes just refuse to be built.
__________________
Real cyclists use toe clips.
With great bikes comes great responsibility.
jimmuller
jimmuller is offline  
Old 11-23-18, 03:11 PM
  #764  
Senior Member
 
Join Date: Oct 2014
Location: Pico Rivera, CA
Posts: 4,219

Bikes: 1983 Basso Gap...2013 Colnago CX-1...2015 Bianchi Intenso

Liked 1,386 Times in 731 Posts
[MENTION=365306]nesteel[/MENTION] Headset arrived...its great..much thanks
bfuser10291295 is offline  
Old 11-24-18, 11:40 AM
  #765  
Stop reading my posts!
 
unworthy1's Avatar
 
Join Date: Sep 2004
Posts: 12,759
Liked 1,189 Times in 872 Posts
Originally Posted by nlerner
Kind of a long shot, but I'm looking for the hardware for this style SR seat post:


Un-sticking a seat post.

I have plenty to trade; let me know what you're looking for.
My friend had a complete post like that in 26.2, If he still has it it was in a plie of parts he was about to donate to the Bike Kitchen so he probably wants little to nothing for it, but I'll check.
unworthy1 is offline  
Old 11-24-18, 12:52 PM
  #766  
Senior Member
 
Join Date: Dec 2005
Posts: 17,334
Liked 7,152 Times in 2,727 Posts
Originally Posted by unworthy1
My friend had a complete post like that in 26.2, If he still has it it was in a plie of parts he was about to donate to the Bike Kitchen so he probably wants little to nothing for it, but I'll check.
Iím all set. Thanks anyway.
nlerner is offline  
Old 11-24-18, 04:14 PM
  #767  
TXHC
 
amillhench's Avatar
 
Join Date: Mar 2008
Location: La Mesa, NM
Posts: 436
Liked 76 Times in 28 Posts
Iím looking for clamp on Simplex SLJ shifters. I have Campy bar end shifters with housing and cable stop. I have a bunch of other stuff if that doesnít work. I may also be interested in SLJ derailleurs. Thanks!
amillhench is offline  
Old 11-24-18, 06:44 PM
  #768  
Senior Member
 
Join Date: Feb 2014
Location: Midwest
Posts: 2,081

Bikes: See the signature....

Liked 195 Times in 117 Posts
Originally Posted by malcala622
[MENTION=365306]nesteel[/MENTION] Headset arrived...its great..much thanks
Ditto. Headset was in todays mail. Happy with it all. Thanks.
__________________
My bikes: '81 Trek 957, '83 Trek 720, '85 Trek 500, '85 Trek 770, '81 Merckx, '85 Centurion Cinelli, '85 Raleigh Portage, '92 RB-2, '09 Bianchi
nesteel is offline  
Old 11-24-18, 07:34 PM
  #769  
Senior Member
 
Join Date: Jan 2017
Location: Berea, KY
Posts: 1,146
Liked 334 Times in 188 Posts
ISO a longish rear derailleur claw. I have the one in the link below and it works fine but I want a longer one. I have a Cyclone GT that is supposed to work with a 34 tooth cog with a 32mm or longer hanger. The hanger I have is definitely not long enough.

Link
__________________
Andy
beicster is offline  
Old 11-25-18, 08:42 AM
  #770  
Senior Member
 
dweenk's Avatar
 
Join Date: Mar 2013
Location: Maryland
Posts: 3,808

Bikes: Lots of English 3-speeds, a couple of old road bikes, 3 mountain bikes, 1 hybrid, and a couple of mash-ups

Liked 337 Times in 226 Posts
Originally Posted by beicster
ISO a longish rear derailleur claw. I have the one in the link below and it works fine but I want a longer one. I have a Cyclone GT that is supposed to work with a 34 tooth cog with a 32mm or longer hanger. The hanger I have is definitely not long enough.

Link
I have one that is available, but I need to know how you are measuring the length to see if it will solve your problem.
dweenk is offline  
Old 11-25-18, 08:44 AM
  #771  
Senior Member
 
Join Date: Jan 2017
Location: Berea, KY
Posts: 1,146
Liked 334 Times in 188 Posts
Originally Posted by dweenk
I have one that is available, but I need to know how you are measuring the length to see if it will solve your problem.
I will get back to you on that. I don't know how they were measured but I will measure the current one center to center on the holes and post. Thanks a bunch for being willing to check.
__________________
Andy
beicster is offline  
Old 11-25-18, 11:43 AM
  #772  
Senior Member
 
Join Date: Jan 2017
Location: Berea, KY
Posts: 1,146
Liked 334 Times in 188 Posts
This is not an exact science but I measured about 28mm from the center of the slot (actually the center of the axle) to the center of the derailleur bolt. Thanks [MENTION=336348]dweenk[/MENTION]
__________________
Andy
beicster is offline  
Old 11-25-18, 12:45 PM
  #773  
Senior Member
 
dweenk's Avatar
 
Join Date: Mar 2013
Location: Maryland
Posts: 3,808

Bikes: Lots of English 3-speeds, a couple of old road bikes, 3 mountain bikes, 1 hybrid, and a couple of mash-ups

Liked 337 Times in 226 Posts

Originally Posted by beicster
This is not an exact science but I measured about 28mm from the center of the slot (actually the center of the axle) to the center of the derailleur bolt. Thanks [MENTION=336348]dweenk[/MENTION]
I think this will work. Here is a photo that makes it clear.
dweenk is offline  
Old 11-25-18, 12:55 PM
  #774  
Eccentric Old Man
 
eom's Avatar
 
Join Date: Jan 2014
Location: BelleVegas, IL
Posts: 719

Bikes: 1986 Trek 520 Cirrus, 1979 Schwinn Traveler III, Trek T100, 1995 Trek 970, Fuji America

Likes: 0
Liked 173 Times in 87 Posts
Originally Posted by beicster
This is not an exact science but I measured about 28mm from the center of the slot (actually the center of the axle) to the center of the derailleur bolt. Thanks [MENTION=336348]dweenk[/MENTION]
The bracket you linked to is marked 27mm on the back side.
Comparison.


__________________
email:
bikeforums@protonmail.com


eom is offline  
Old 11-25-18, 01:04 PM
  #775  
Senior Member
 
Join Date: Jan 2017
Location: Berea, KY
Posts: 1,146
Liked 334 Times in 188 Posts
Originally Posted by dweenk


I think this will work. Here is a photo that makes it clear.
Looks like it is marked 32 as well. I'll send you a DM to get the process going. Thanks a bunch.
__________________
Andy
beicster is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Your Privacy Choices -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.