Go Back  Bike Forums > Bike Forums > Classic & Vintage
Reload this Page >

ISO and for trade thread part 5

Notices
Classic & Vintage This forum is to discuss the many aspects of classic and vintage bicycles, including musclebikes, lightweights, middleweights, hi-wheelers, bone-shakers, safety bikes and much more.

ISO and for trade thread part 5

Old 12-20-18, 09:30 AM
  #826  
Senior Member
 
SJX426's Avatar
 
Join Date: May 2008
Location: Fredericksburg, Va
Posts: 9,676

Bikes: '65 Frejus TDF, '73 Bottecchia Giro d'Italia, '83 Colnago Superissimo, '84 Trek 610, '84 Trek 760, '88 Pinarello Veneto, '88 De Rosa Pro, '89 Pinarello Montello, '94 Burley Duet, 97 Specialized RockHopper, 2010 Langster, Tern Link D8

Liked 2,297 Times in 1,147 Posts
Looking for a replacement for the stem shown below. It is a SR Royal extra light, 130mm. See Velobase. This is also the same stem found under the Suntour Superbe Pro label. Both fasteners are titanium with a hollow stem. This is about as light as you can get for a quill stem.
I need a 100 or 110 in length.

I will trade for either label of the same stem. I might even be enticed to trade for a Superbe Pro post in 27.2. Another option is a Pinarello panto Cinelli 1R.


P1040807, on Flickr
__________________
Bikes don't stand alone. They are two tired.

Last edited by SJX426; 12-20-18 at 09:40 AM.
SJX426 is offline  
Old 12-20-18, 10:36 AM
  #827  
Senior Member
 
rjhammett's Avatar
 
Join Date: Dec 2011
Location: Saint Paul, Minnesota
Posts: 2,263

Bikes: 85 De Rosa, 92 Merckx MX Leader, 99 Tommasini Sintesi, 08 Look 585, 89 Merckx Corsa Extra, 72 Holdsworth Professional

Liked 587 Times in 255 Posts
ISO: I am looking for a rear wheel quick release axle. It is for a tandem bike so I am looking for around 150/151mm length. If you have something in the 155mm length that I could cut down that would also work.
rjhammett is offline  
Old 12-20-18, 06:18 PM
  #828  
Not lost wanderer.
 
bwilli88's Avatar
 
Join Date: Jan 2013
Location: Lititz, Pa
Posts: 3,399

Bikes: In USA; 73 Raleigh Super Course dingle speed, 72 Raleigh Gran Sport SS, 72 Geoffry Butler, 81 Centurion Pro-Tour, 74 Gugie Grandier Sportier

Liked 1,062 Times in 563 Posts
Looking for a set of Shimano 9 speed DT shifters.
bwilli88 is offline  
Old 12-22-18, 08:04 PM
  #829  
Senior Member
 
degan's Avatar
 
Join Date: Nov 2010
Location: Oregon
Posts: 911
Liked 103 Times in 55 Posts
Anyone got a V1 (7700, 6500, or 5500) shimano octalink BB with some life left? Standard threading, 109ish to be paired with a 7700 DA crankset. The tech at the local co-op argued with me for a long time about the BB I need even existing, to the point where I almost pulled out my phone to show him. Luckily he was 22 and already had his phone out.
degan is offline  
Old 12-22-18, 10:49 PM
  #830  
Senior Member
 
Join Date: Oct 2014
Location: Pico Rivera, CA
Posts: 4,219

Bikes: 1983 Basso Gap...2013 Colnago CX-1...2015 Bianchi Intenso

Liked 1,386 Times in 731 Posts
[MENTION=486602]deux jambes[/MENTION]

I've got a Record/Super Record headset i may be interested in trading.

Tomorrow (Sunday) I'm back home and can send you pictures.
bfuser10291295 is offline  
Old 12-23-18, 02:37 AM
  #831  
Senior Member
 
Wileyone's Avatar
 
Join Date: Oct 2014
Location: GWN
Posts: 2,538
Liked 609 Times in 406 Posts
Looking for a 26.4 seatpost. Hopefully French.
Wileyone is offline  
Old 12-23-18, 10:30 AM
  #832  
Senior Member
 
deux jambes's Avatar
 
Join Date: Jul 2018
Location: Eugene, OR
Posts: 1,326
Liked 348 Times in 197 Posts
Originally Posted by Wileyone
Looking for a 26.4 seatpost. Hopefully French.
I have a French 26.4 seat post. It’s 200mm long (rail to bottom) Made by JPR (Routens). Fluted aluminum. Light!!! In need of polish, but hardly a scratch on it. Send a PM if interested,


deux jambes is offline  
Old 12-23-18, 10:43 AM
  #833  
Senior Member
 
bikemig's Avatar
 
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,673

Bikes: A bunch of old bikes and a few new ones

Liked 3,801 Times in 2,210 Posts
Originally Posted by deux jambes


I have a French 26.4 seat post. It’s 200mm long (rail to bottom) Made by JPR (Routens). Fluted aluminum. Light!!! In need of polish, but hardly a scratch on it. Send a PM if interested,

Interested in trading for this but [MENTION=389973]Wileyone[/MENTION]s has first dibs.
bikemig is online now  
Old 12-23-18, 10:57 AM
  #834  
Senior Member
 
3speedslow's Avatar
 
Join Date: Oct 2010
Location: Jacksonville, NC
Posts: 9,399

Bikes: A few

Liked 1,168 Times in 668 Posts



OT for trade but I hang out here...

Have: Modern Shimano 105 175mm crank in triple.

ISO: Shimano 105 modern crank in triple with 170mm length. Don’t need the rings.

also, I have a nice Tiagra crank that needs rings. The length is good so if all else fails, maybe I can use that. Does anyone have rings they want to trade for?


Thanks all, 3SS
3speedslow is offline  
Old 12-23-18, 11:26 AM
  #835  
Senior Member
 
Wileyone's Avatar
 
Join Date: Oct 2014
Location: GWN
Posts: 2,538
Liked 609 Times in 406 Posts
Originally Posted by bikemig
Interested in trading for this but [MENTION=389973]Wileyone[/MENTION]s has first dibs.
Go for it . It's a little to short for my needs.
Wileyone is offline  
Old 12-23-18, 12:40 PM
  #836  
Senior Member
 
deux jambes's Avatar
 
Join Date: Jul 2018
Location: Eugene, OR
Posts: 1,326
Liked 348 Times in 197 Posts
Originally Posted by bikemig
Interested in trading for this but [MENTION=389973]Wileyone[/MENTION]s has first dibs.
PM sent!
deux jambes is offline  
Old 12-23-18, 07:52 PM
  #837  
Senior Member
 
Join Date: Oct 2014
Location: Pico Rivera, CA
Posts: 4,219

Bikes: 1983 Basso Gap...2013 Colnago CX-1...2015 Bianchi Intenso

Liked 1,386 Times in 731 Posts
Gone

Last edited by bfuser10291295; 12-28-18 at 08:33 PM.
bfuser10291295 is offline  
Old 12-24-18, 01:43 PM
  #838  
Senior Member
 
Join Date: Mar 2015
Location: Connecticut
Posts: 1,858
Liked 43 Times in 34 Posts
I have a Raleigh Competition GS frame/fork (approx 1973) Reynolds 531 for a Park TS-2 in good condition.

Frame is big: either 60cm or 62cm
vintagerando is offline  
Old 12-24-18, 08:08 PM
  #839  
Senior Member
 
Lascauxcaveman's Avatar
 
Join Date: Nov 2011
Location: Port Angeles, WA
Posts: 7,925

Bikes: A green one, "Ragleigh," or something.

Liked 636 Times in 358 Posts
Originally Posted by jeirvine
Soigneur in NZ does "Semi-Custom" wool jerseys. One could easily email them the SunTour graphics and have something made that would be close. I've been kicking around the idea of a full merino QuickStep Floors jersey.
https://www.soigneur.co.nz/category/58381?nav=ccy
Or do the same through Portland/Oregon Cyclewear Customers and their close friends Wool Cycling Jerseys.
Looks like you can get similar results less dear. (No offense to our Kiwi pals.)

Spectrum Embroidery and Oregon Cyclewear are where the Cino folks get their stuff made.
__________________
● 1971 Grandis SL ● 1972 Lambert Grand Prix frankenbike ● 1972 Raleigh Super Course fixie ● 1973 Nishiki Semi-Pro ● 1979 Motobecane Grand Jubile ●1980 Apollo "Legnano" ● 1984 Peugeot Vagabond ● 1985 Shogun Prairie Breaker ● 1986 Merckx Super Corsa ● 1987 Schwinn Tempo ● 1988 Schwinn Voyageur ● 1989 Bottechia Team ADR replica ● 1990 Cannondale ST600 ● 1993 Technium RT600 ● 1996 Kona Lava Dome ●

Lascauxcaveman is offline  
Old 12-25-18, 10:58 PM
  #840  
What happened?
 
Rollfast's Avatar
 
Join Date: Jun 2007
Location: Around here somewhere
Posts: 7,927

Bikes: 3 Rollfasts, 3 Schwinns, a Shelby and a Higgins Flightliner in a pear tree!

Liked 292 Times in 255 Posts
Originally Posted by jeirvine
Until you posted that pic, I was not aware that I desperately also wanted one of those.
Especially in XXL...mmmmm.
__________________
I don't know nothing, and I memorized it in school and got this here paper I'm proud of to show it.
Rollfast is offline  
Old 12-25-18, 11:26 PM
  #841  
Senior Member
 
Join Date: Dec 2008
Posts: 659
Likes: 0
Liked 0 Times in 0 Posts
ISO Suntour Cyclone first gen RD body. Will take a whole component. Any cage length. Have same RD minus the one spring that doesn't seem to be replaceable, so missing mounting bolt, clamp bolt, or cage is OK.
stausty is offline  
Old 12-29-18, 03:43 PM
  #842  
Junior Member
 
danarello's Avatar
 
Join Date: Sep 2016
Location: Southern California
Posts: 196

Bikes: 2013 Pinarello FPQuattro Ultegra; 1987 Schwinn Super Sport; 1989 Schwinn Tempo

Liked 3 Times in 2 Posts
ISO Shimano Brake Pads

Looking for a set of brake pads for 80s Shimano 600 brake calipers.


danarello is offline  
Old 12-29-18, 04:42 PM
  #843  
What??? Only 2 wheels?
 
jimmuller's Avatar
 
Join Date: Apr 2010
Location: Boston-ish, MA
Posts: 13,439

Bikes: 72 Peugeot UO-8, 82 Peugeot TH8, 87 Bianchi Brava, 76? Masi Grand Criterium, 74 Motobecane Champion Team, 86 & 77 Gazelle champion mondial, 81? Grandis, 82? Tommasini, 83 Peugeot PF10

Liked 660 Times in 236 Posts
Originally Posted by stausty
ISO Suntour Cyclone first gen RD body. Will take a whole component. Any cage length. Have same RD minus the one spring that doesn't seem to be replaceable, so missing mounting bolt, clamp bolt, or cage is OK.
Calling [MENTION=360474]Prowler[/MENTION]. [MENTION=149358]stausty[/MENTION], you need to find out how he "fixed" a broken Cyclone cage spring. It seems to be a weakness of that spring. (I've broken two, or maybe three. Looked into getting some made by a custom spring manufacturer but couldnt get enough buy-in from BF members to help spread the cost.)
__________________
Real cyclists use toe clips.
With great bikes comes great responsibility.
jimmuller
jimmuller is offline  
Old 12-30-18, 07:18 PM
  #844  
Señor Member
 
USAZorro's Avatar
 
Join Date: Oct 2004
Location: Hardy, VA
Posts: 18,004

Bikes: Mostly English - predominantly Raleighs

Liked 1,160 Times in 675 Posts
Hope everyone had an excellent Christmas/Hannukah/Kwanza/Festivus, and is ready to ring in 2019.

I went and added a teeny bit to my project list, and find myself with a freshly repainted bicycle that needs a couple parts. I find myself needing a Sturmey Archer 3-speed hub (with no coaster brake). Would prefer alloy, but not going to be fussy as long as the spoke holes are sound and there's no rust. Can be either 36 or 40 holes, but 36 will give me more rim choices. Putting this sought item on hold until I figure something out.

Also looking for a 25.4 handlebar that would look appropriate on a 3-speed... either a bar with low to moderate rise, or some variation of North Road that doesn't lay flat.

I have a bunch of Sunshine hubs, a couple SA 3-speed hubs with coaster brakes, an assortment of quick release levers, a few stems, and some other odds and ends that I could trade. I'm pretty resourceful, so I'm pretty sure something could be worked out.

Thanks.
__________________
In search of what to search for.

Last edited by USAZorro; 01-02-19 at 07:52 AM.
USAZorro is offline  
Old 12-31-18, 04:18 PM
  #845  
Full Member
 
Join Date: Nov 2012
Posts: 331
Liked 1 Time in 1 Post
Iso stronglight crank puller

Need a puller for a model 63 super competiton crankset. Desperate to get this project finished.
stykthyn is offline  
Old 12-31-18, 04:23 PM
  #846  
Senior Member
 
Join Date: Aug 2007
Location: Evanston, IL
Posts: 5,211

Bikes: many

Liked 1,456 Times in 803 Posts
Originally Posted by stykthyn
Need a puller for a model 63 super competiton crankset. Desperate to get this project finished.
Looks like this crank requires the 23.5 Stronglight remover. If so, is a loaner ok? If you can't find it local to wherever you are, I'm willing to send mine to you for your project, as long as I get it back.
__________________
Monti Special
smontanaro is offline  
Old 12-31-18, 04:26 PM
  #847  
Full Member
 
Join Date: Nov 2012
Posts: 331
Liked 1 Time in 1 Post
Originally Posted by smontanaro
Looks like this crank requires the 23.5 Stronglight remover. If so, is a loaner ok? If you can't find it local to wherever you are, I'm willing to send mine to you for your project, as long as I get it back.
a loaner would work. Isn't one locally. Just need to get these cranks off to be re-tapped. I could paypal you a deposit or money for your time/ effort.
stykthyn is offline  
Old 12-31-18, 04:42 PM
  #848  
Senior Member
 
jeirvine's Avatar
 
Join Date: Sep 2011
Location: Baltimore MD
Posts: 3,338

Bikes: '72 Motobecane Grand Record, '72 Gitane tandem, '72 Raleigh Super Course, '73 Raleigh Gran Sport, '73 Colnago Super, '76 Fiorelli Coppi, '78 Raleigh SBDU Team Pro, '78 Trek 930, '81 Holdsworth Special 650B, '86 Masi GC, ’94 Bridgestone RB-T

Liked 526 Times in 284 Posts
Originally Posted by stykthyn
a loaner would work. Isn't one locally. Just need to get these cranks off to be re-tapped. I could paypal you a deposit or money for your time/ effort.
Where are you located? Someone here may live close and have a loaner.
__________________
The man who dies with the most toys…is dead. - Rootboy
jeirvine is offline  
Old 12-31-18, 04:56 PM
  #849  
Full Member
 
Join Date: Nov 2012
Posts: 331
Liked 1 Time in 1 Post
Originally Posted by jeirvine
Where are you located? Someone here may live close and have a loaner.
i am in gaineville fl
stykthyn is offline  
Old 01-01-19, 07:22 PM
  #850  
Senior Member
 
jethin's Avatar
 
Join Date: Oct 2009
Posts: 1,126
Liked 362 Times in 174 Posts
ISO: 27.4 seatpost, silver. Rider quality or better.

HAVE: Nice bike goodies, good tidings...
jethin is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Your Privacy Choices -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.