Quill Stem Options?
#1
Senior Member
Thread Starter
Join Date: Jul 2015
Location: Holland, Michigan
Posts: 134
Bikes: 1991 Team Miyata, and a 2014 Cannondale Synapse (for sale)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Quill Stem Options?
I have a 1990 and I need a new quill stem as the handlebars slip and makes it unsafe to ride. I currently have Cinelli bars and Cinelli XA stem currently on it and love the look. I've heard a lot of bad things about the XA stem, so I am looking into other period options from any other companies. I like a sleek look, but it's before my time, so I don't know what would be a good option. 110mm is my current stem length, so I would like a model that makes a 110mm. This is not a looking to buy post, just trying to see what period correct options there are.
Thanks in advance!
Thanks in advance!
#2
Senior Member
Join Date: Oct 2014
Location: Portland, OR
Posts: 12,905
Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder
Mentioned: 129 Post(s)
Tagged: 0 Thread(s)
Quoted: 4806 Post(s)
Liked 3,928 Times
in
2,553 Posts
The brain dead answer is Nitto. Their stems are as nice as you want to pay for. The top end, the Pearl, is as nice (and probably better machined, accurate, etc.) as any stem made. Most of Nitto's stems are measured like everybody else's. but note: the Pearl is measured handlebar center to intersection of stem centerline and steerer centerlinr. So, take the Pearl named dimension and multiply by 1.08. (A Pearl 12 is a Cinelli/TTT 130.)
Google Nitto Pearl. It doesn't look like yours; more like an older Cinelli. Web photos do not do it justice. In your hands it is a knockout. Especially when you can see all the machining detail normally hidden by bar and steerer. In production and probably will be for a while. They come both 25.4 and 26.0 mm dia.
Ben
Google Nitto Pearl. It doesn't look like yours; more like an older Cinelli. Web photos do not do it justice. In your hands it is a knockout. Especially when you can see all the machining detail normally hidden by bar and steerer. In production and probably will be for a while. They come both 25.4 and 26.0 mm dia.
Ben
#3
Senior Member
Join Date: Apr 2011
Posts: 7,052
Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 4399 Post(s)
Liked 1,556 Times
in
1,021 Posts
What have you heard about XAs? I've never heard any issues - popular stem.
The bar diameter is the rarer 26.4mm, so your options are Cinelli 1A or rarer Mavic stems. Later Cinelli stems were 26.0, so shop carefully.
The bar diameter is the rarer 26.4mm, so your options are Cinelli 1A or rarer Mavic stems. Later Cinelli stems were 26.0, so shop carefully.
#4
Senior Member
Thread Starter
Join Date: Jul 2015
Location: Holland, Michigan
Posts: 134
Bikes: 1991 Team Miyata, and a 2014 Cannondale Synapse (for sale)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I just ran across the Cinelli 1R stem, it would go well with my blacked out look I've gone for my bike, but I haven't heard anything about it, is it a good stem?
Last edited by Mr.Peloton; 06-20-18 at 08:05 PM. Reason: Typos/new info
#5
Senior Member
Join Date: Nov 2015
Posts: 4,486
Mentioned: 102 Post(s)
Tagged: 0 Thread(s)
Quoted: 1639 Post(s)
Likes: 0
Liked 829 Times
in
538 Posts
Are you talking about the logo on the front of the XA stem?? If you are, it is close to the same as what's on the 1R, with the XA having more material under the plastic black Cinelli logo disc as it is not punched through (except for small holes for locating rods at the back of the disc.) like the 1R, so should be stronger at that area than the 1R, but maybe the forcing from the split clamp design might still cause it to crack, unlike the 1R that has a clamp are without a split on it (a continuous ring around the handlebar)...
#6
Full Member
I have a 1990 and I need a new quill stem as the handlebars slip and makes it unsafe to ride. I currently have Cinelli bars and Cinelli XA stem currently on it and love the look. I've heard a lot of bad things about the XA stem, so I am looking into other period options from any other companies. I like a sleek look, but it's before my time, so I don't know what would be a good option. 110mm is my current stem length, so I would like a model that makes a 110mm. This is not a looking to buy post, just trying to see what period correct options there are.
Thanks in advance!
Thanks in advance!
3ttt Evol and Record 84 are also from this period and not just in black versions. The Pro racers had to do it in the meantime.