Go Back  Bike Forums > Bike Forums > Classic & Vintage
Reload this Page >

Another Alex Singer found in North Bend!

Notices
Classic & Vintage This forum is to discuss the many aspects of classic and vintage bicycles, including musclebikes, lightweights, middleweights, hi-wheelers, bone-shakers, safety bikes and much more.

Another Alex Singer found in North Bend!

Old 10-17-19, 06:07 PM
  #1  
northbend 
Senior Member
Thread Starter
 
northbend's Avatar
 
Join Date: Mar 2008
Location: North Bend, Washington State
Posts: 2,422

Bikes: 1937 Hobbs; 1974 Alex Singer; 1977 Bruce Gordon; 1987 Bill Holland; 1988 Schwinn Paramount (Fixed gear); 1999 Fat City Yo Eddy (MTB); 2018 Woodrup (Touring)

Mentioned: 223 Post(s)
Tagged: 0 Thread(s)
Quoted: 370 Post(s)
Liked 1,067 Times in 253 Posts
Another Alex Singer found in North Bend!

Recently Bob Freeman asked me if I knew there was another Alex Singer bicycle owner in our small town of North Bend (I didn’t).. Turns out Rick lives just a few miles from me out near Mount Si.

Rick had heard of Bob Freeman’s reputation for restoring bikes and contacted him asking for help/advice on an Alex Singer he had bought recently in Europe. A couple of emails later, it was decided he’d bring it by Bob’s house today and they would check it out and I was invited over….

Deep inside Bobs underground workshop, Rick and Bob look over Ricks Singer.

Rick brings his bike over to Bobs by NBend, on Flickr

Singer custom made Front Derailleur details

Front Derailleur by NBend, on Flickr

FD detail 3 by NBend, on Flickr

Drive train
Drive train by NBend, on Flickr

Rear derailluer by NBend, on Flickr
northbend is online now  
Old 10-17-19, 06:09 PM
  #2  
northbend 
Senior Member
Thread Starter
 
northbend's Avatar
 
Join Date: Mar 2008
Location: North Bend, Washington State
Posts: 2,422

Bikes: 1937 Hobbs; 1974 Alex Singer; 1977 Bruce Gordon; 1987 Bill Holland; 1988 Schwinn Paramount (Fixed gear); 1999 Fat City Yo Eddy (MTB); 2018 Woodrup (Touring)

Mentioned: 223 Post(s)
Tagged: 0 Thread(s)
Quoted: 370 Post(s)
Liked 1,067 Times in 253 Posts
Check out the straddle cable hanger made from a chain link

cable straddle made from chain link by NBend, on Flickr


Rear straddle detail by NBend, on Flickr

Piel Pedals!

Piel Pedal detail 3 by NBend, on Flickr


Piel Pedals! by NBend, on Flickr

Singer made brakes

Singer Brakes by NBend, on Flickr

Bell Wingnuts, Maxi Car hubs…

Bell Wingnut by NBend, on Flickr

Chain Keeper brazed on the rear dropout. You shift the chain onto the chain keeper and the wing nut unscrews on the drive side from the rear axle inside the hub so the wheel can be removed without ever touching the chain. Pretty cool.

Note chain keeper brazed on rear dropout by NBend, on Flickr

Fender detail

Fear fender detail by NBend, on Flickr

Seat post expander bolt detail

Seat Post Expander bolt detail by NBend, on Flickr

Handlebar

Handlebar by NBend, on Flickr

It’s always exciting to meet another vintage bike owner and today was no exception. It will be fun to see how this bike gets restored. The black paint is quite rough with a lot of surface rust especially on the top tube and the chrome is pretty bad too. I think it will probably be repainted and chrome re-plated. Best guess is this example came out of the shop in the late 50’s.

Anyways, I thought this bike was so cool I just had to share it with you..

Last edited by northbend; 10-17-19 at 06:16 PM.
northbend is online now  
Old 10-17-19, 06:13 PM
  #3  
repechage
Senior Member
 
Join Date: Jun 2006
Posts: 15,723
Mentioned: 104 Post(s)
Tagged: 0 Thread(s)
Quoted: 1842 Post(s)
Liked 683 Times in 535 Posts
So Constructeur.
repechage is offline  
Likes For repechage:
Old 10-17-19, 06:15 PM
  #4  
ryansu 
Ride.Smile.Repeat
 
ryansu's Avatar
 
Join Date: May 2011
Location: Seattle WA
Posts: 2,863

Bikes: 2009 Handsome Devil, 1987 Trek 520 Cirrus, 1978 Motobecane Grand Touring, 1987 Nishiki Cresta GT, 1989 Specialized Allez Former bikes; 1986 Miyata Trail Runner, 1979 Miyata 912, 2011 VO Rando, 1999 Cannondale R800, 1986 Schwinn Passage

Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 787 Post(s)
Liked 498 Times in 357 Posts
That has to be the most austere set of derailleurs, especially the FD, I have ever seen and at the same time perhaps the coolest! thanks for sharing @northbend
ryansu is offline  
Likes For ryansu:
Old 10-17-19, 06:41 PM
  #5  
Andy_K 
Senior Member
 
Andy_K's Avatar
 
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 13,124

Bikes: Yes

Mentioned: 375 Post(s)
Tagged: 0 Thread(s)
Quoted: 2251 Post(s)
Liked 906 Times in 466 Posts
That front derailleur is crazy! And awesome! I also really like the straddle cable handling, especially the upper pulley and routing.
__________________
My Bikes
Andy_K is offline  
Old 10-17-19, 06:49 PM
  #6  
belacqua
Senior Member
 
Join Date: Sep 2008
Location: Kansas City
Posts: 415
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 95 Post(s)
Liked 41 Times in 28 Posts
Wow. Stunning.
belacqua is offline  
Old 10-17-19, 06:53 PM
  #7  
GrainBrain
Senior Member
 
GrainBrain's Avatar
 
Join Date: Aug 2017
Location: Central Io-way
Posts: 1,960

Bikes: LeMond Zurich, Giant Talon 29er

Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 1024 Post(s)
Liked 305 Times in 233 Posts
That chain keeper is genius!
GrainBrain is online now  
Old 10-17-19, 06:55 PM
  #8  
bikemig 
Senior Member
 
bikemig's Avatar
 
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 18,430

Bikes: A bunch of old bikes and a few new ones

Mentioned: 158 Post(s)
Tagged: 0 Thread(s)
Quoted: 5077 Post(s)
Liked 1,637 Times in 1,077 Posts
Very neat bike. And 2 Singers in NorthBend, that's cool.
bikemig is online now  
Old 10-17-19, 07:08 PM
  #9  
merziac
Senior Member
 
merziac's Avatar
 
Join Date: Oct 2015
Location: PDX
Posts: 7,889

Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2

Mentioned: 159 Post(s)
Tagged: 0 Thread(s)
Quoted: 2374 Post(s)
Liked 1,575 Times in 1,067 Posts
So cool, flippin amazing.

@northbend, tx for sharing.

Obviously couldn't be in better hands.

Last edited by merziac; 10-17-19 at 07:14 PM.
merziac is offline  
Old 10-17-19, 07:58 PM
  #10  
TenGrainBread 
Senior Member
 
TenGrainBread's Avatar
 
Join Date: Sep 2015
Location: Madison, WI
Posts: 2,589

Bikes: Cherubim, Alps, a few Schwinns

Mentioned: 52 Post(s)
Tagged: 0 Thread(s)
Quoted: 1070 Post(s)
Liked 395 Times in 253 Posts
Very similar features to Jan Heine's 1962 Singer, including the Nivex/Singer derailleurs, chainrest, cable hanger, Singer brakes, etc...

https://janheine.wordpress.com/2012/...ng-strong/amp/

Last edited by TenGrainBread; 10-17-19 at 08:03 PM.
TenGrainBread is offline  
Old 10-17-19, 08:21 PM
  #11  
gugie 
Dilberteur at large
 
gugie's Avatar
 
Join Date: Jul 2014
Location: Portland, OR
Posts: 9,194

Bikes: It's complicated.

Mentioned: 1010 Post(s)
Tagged: 0 Thread(s)
Quoted: 3257 Post(s)
Liked 1,546 Times in 793 Posts
I've been waiting for this post, and you didn't disappoint!

Now to talk both of you in joining me for FFD 2020...
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
gugie is offline  
Old 10-17-19, 08:34 PM
  #12  
davester
Senior Member
 
davester's Avatar
 
Join Date: Oct 2012
Location: Berkeley CA
Posts: 1,953

Bikes: 1981 Ron Cooper, 1974 Cinelli Speciale Corsa, 2000 Gary Fisher Sugar 1, 1986 Miyata 710, 1982 Raleigh "International"

Mentioned: 53 Post(s)
Tagged: 0 Thread(s)
Quoted: 624 Post(s)
Liked 288 Times in 170 Posts
Something like that is basically my grail bike. There are so many completely custom bits that are beautiful...the FD, the fender details, the chainrings, the brakes... One day...one day...
davester is offline  
Old 10-17-19, 08:58 PM
  #13  
CV-6 
If I own it, I ride it
 
CV-6's Avatar
 
Join Date: Nov 2005
Location: Cardinal Country
Posts: 5,202

Bikes: Lejeune, Raleigh, Raysport, Jan De Reus, Gazelle, Masi, B. Carré, Springfield, Motobecane, John Howard, Greg Lemond, Andre Bertin

Mentioned: 53 Post(s)
Tagged: 0 Thread(s)
Quoted: 468 Post(s)
Likes: 0
Liked 285 Times in 154 Posts
That is sweet.


@northbend Two questions on the crank. That looks like a Stronglight 49 but it also looks like the arms are a bit more slender. Or is that just photo angle? And what is that ring setup? That is something on the line of what I am seeking for a project.

__________________
Please do not "like" my posts. This isn't Facebook.

Lynn Travers

Photos


Last edited by CV-6; 10-18-19 at 07:10 AM.
CV-6 is offline  
Old 10-17-19, 09:12 PM
  #14  
mpetry912 
aged to perfection
 
mpetry912's Avatar
 
Join Date: Jun 2009
Location: PacNW
Posts: 469

Bikes: Dinucci Allez 2.0, Richard Sachs, Alex Singer, Serotta, Masi GC, Raleigh Pro Mk.1, Hetchins, etc

Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 204 Post(s)
Liked 130 Times in 97 Posts
I would not ever restore this bike. Just very lightly conserve it. clean off the crud, lube, adjust etc. Don't paint. Minimal polish. Toothbrush and q tips.

It's grail. consider the history. I have been fortunate to do some consulting work for the national air and space museum shops in Silver Hill, Md. That team has a respect for the story that the artifact tells, you do not want to disturb that in any way ! Just clean it up, fix obvious defects, make it beautiful, but resist the urge to restore, and instead preserve the originality at all costs.

and yes, needs to be at Peter's FFD next year. He'll make room.

Mark Petry
Bainbridge Island, WA

Last edited by mpetry912; 10-17-19 at 09:22 PM.
mpetry912 is offline  
Old 10-17-19, 09:25 PM
  #15  
Chr0m0ly 
Senior Member
 
Chr0m0ly's Avatar
 
Join Date: Apr 2014
Location: Back in Lincoln Sq, Chicago...🙄
Posts: 1,585

Bikes: '84 Miyata 610 ‘91 Cannondale ST600,'83 Trek 720 ‘84 Trek 520, 620, ‘91 Miyata 1000LT, '79 Trek 514, '78 Trek 706, '73 Raleigh Int. frame.

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 628 Post(s)
Liked 248 Times in 154 Posts
Originally Posted by mpetry912 View Post
I would not ever restore this bike. Just very lightly conserve it. clean off the crud, lube, adjust etc. Don't paint. Minimal polish. Toothbrush and q tips.

It's grail. consider the history. I have been fortunate to do some consulting work for the national air and space museum shops in Silver Hill, Md. That team has a respect for the story that the artifact tells, you do not want to disturb that in any way ! Just clean it up, fix obvious defects, make it beautiful, but resist the urge to restore, and instead preserve the originality at all costs.

and yes, needs to be at Peter's FFD next year. He'll make room.

Mark Petry
Bainbridge Island, WA
I’d second this. T’were me I’d want to add to the story without erasing the beginning. : )
Chr0m0ly is offline  
Old 10-17-19, 10:03 PM
  #16  
crank_addict
Banned
 
Join Date: Aug 2013
Posts: 7,152
Mentioned: 93 Post(s)
Tagged: 0 Thread(s)
Quoted: 1361 Post(s)
Likes: 0
Liked 393 Times in 258 Posts
Originally Posted by northbend View Post


Rear derailluer by NBend, on Flickr
Gnarly and wild, I'd be tempted to run red meat through that grinder.

All kidding aside, this is a treat to see and learn some. Thank you and the other fellows for sharing~
crank_addict is offline  
Old 10-17-19, 10:16 PM
  #17  
thinktubes 
weapons-grade bolognium
 
thinktubes's Avatar
 
Join Date: Dec 2008
Location: Across the street from Chicago
Posts: 5,517

Bikes: Battaglin Cromor, Ciocc Designer 84, Schwinn Superior 1981

Mentioned: 38 Post(s)
Tagged: 0 Thread(s)
Quoted: 702 Post(s)
Liked 818 Times in 410 Posts
Every nut and bolt captures my attention - a mechanical feast for the eyes!
thinktubes is online now  
Old 10-17-19, 10:16 PM
  #18  
ThermionicScott 
7-speed cultist
 
ThermionicScott's Avatar
 
Join Date: Aug 2011
Location: CID
Posts: 20,113

Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers)

Mentioned: 88 Post(s)
Tagged: 0 Thread(s)
Quoted: 2797 Post(s)
Liked 748 Times in 525 Posts
Too cool! It's a shame that cam-driven brake didn't become more popular outside of Singer's bikes -- they're probably the only rim brakes I know of that don't aim higher or lower as the brake pads wear.
__________________
Originally Posted by chandltp View Post
There's no such thing as too far.. just lack of time
Originally Posted by noglider
People in this forum are not typical.
RUSA #7498
ThermionicScott is offline  
Old 10-17-19, 11:14 PM
  #19  
Wildwood
Veteran, Pacifist
 
Wildwood's Avatar
 
Join Date: Dec 2004
Location: Seattle area
Posts: 10,922

Bikes: Bikes??? Thought this was social media?!?

Mentioned: 246 Post(s)
Tagged: 0 Thread(s)
Quoted: 2754 Post(s)
Liked 1,616 Times in 941 Posts
The epitome of 'classic'.
Even historic.



Personally, I'm glad I'm not drawn to own such bikes. I'm not worthy, just a hack. But I can still be amazed by the builder's dedication to innovation - and the people who seek them out today.

Nice photo documentation.
edit: hopefully Bob is not feeling as bad as he looks in the 1st pic.

Last edited by Wildwood; 10-17-19 at 11:22 PM.
Wildwood is offline  
Old 10-17-19, 11:59 PM
  #20  
Lascauxcaveman 
Senior Member
 
Lascauxcaveman's Avatar
 
Join Date: Nov 2011
Location: Port Angeles, WA
Posts: 7,899

Bikes: A green one, "Ragleigh," or something.

Mentioned: 182 Post(s)
Tagged: 0 Thread(s)
Quoted: 1577 Post(s)
Liked 467 Times in 274 Posts
Holy geez. I'd be almost afraid to wipe that thing down with a damp cloth, much less repaint it.

Maybe new cables and bake pads if I was planning on riding it a lot. But other than that...?
__________________
● 1971 Grandis SL ● 1972 Lambert Grand Prix frankenbike ● 1972 Raleigh Super Course fixie ● 1973 Nishiki Semi-Pro ● 1980 Apollo "Legnano" ● 1984 Peugeot Vagabond ● 1985 Shogun Prairie Breaker ● 1986 Merckx Super Corsa ● 1987 Schwinn Tempo ● 1988 Schwinn Voyageur ● 1989 Trek 400 ● 1989 Bottechia Team ADR replica ● 1990 Cannondale ST600 ● 1993 Technium RT600 ● 1996 Kona Lava Dome ●
Lascauxcaveman is offline  
Old 10-18-19, 02:56 AM
  #21  
Vonruden 
Gold Member
 
Vonruden's Avatar
 
Join Date: Mar 2012
Location: Ocean County, NJ
Posts: 2,970

Bikes: Looking for a Baylis or Wizard in 59-62cm range

Mentioned: 61 Post(s)
Tagged: 0 Thread(s)
Quoted: 349 Post(s)
Liked 178 Times in 64 Posts
Very cool, thanks for sharing!
__________________
"My biggest fear is that when I die my wife will sell my bicycles for what I told her they cost."

Get on your bikes and ride!

https://instagram.com/norseamerican/
Vonruden is offline  
Old 10-18-19, 04:56 AM
  #22  
nlerner
Senior Member
 
Join Date: Dec 2005
Posts: 14,348
Mentioned: 349 Post(s)
Tagged: 0 Thread(s)
Quoted: 2245 Post(s)
Liked 1,899 Times in 959 Posts
That’s cool. Thanks for sharing.

But are you telling us that Bob does not have a Singer amongst his collection?!
nlerner is offline  
Old 10-18-19, 05:02 AM
  #23  
horatio 
Hump, what hump?
 
horatio's Avatar
 
Join Date: Dec 2003
Location: SC midlands
Posts: 1,883

Bikes: See signature

Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 325 Post(s)
Liked 202 Times in 130 Posts
Love those derailleurs, especially the front. Elegant and minimalist.
__________________
2010 AB T1X ** 2010 Cannondale SIX-5 ** 1993 Cannondale RS900 ** 1989 Bianchi Brava ** 1988 Nishiki Olympic ** 1987 Centurion Ironman Expert(2) ** 1985 DeRosa Professional SLX ** 1982 Basso Gap ** 198? Ciocc Designer '84 ** 198? Ciocc Competition SL ** 19?? Roberts Audax ** 198? Brian Rourke ** 1982 Mercian Olympic ** 1970 Raleigh Professional MK I ** 1952 Raleigh Sports
horatio is offline  
Old 10-18-19, 06:29 AM
  #24  
speedevil 
I never finish anyth
 
speedevil's Avatar
 
Join Date: Jul 2010
Location: Western KY
Posts: 1,120

Bikes: 2008 Merckx LXM, 2003 Giant XTC mtb, 2001 Lemond Alpe d'Huez, 1997 Lemond Zurich, 1989 Cannondale ST, 1988 Masi Nuovo Strada, 1983 Pinarello Turismo

Mentioned: 63 Post(s)
Tagged: 0 Thread(s)
Quoted: 294 Post(s)
Liked 132 Times in 82 Posts
I read about the chain holders that you shift onto for removing the rear wheel. Does the lever have a stop or catch that prevents accidental shifting onto the holder in normal operation? I recall reading that was another innovation for those.

That bike just screams "Oh, let me find an elegant way to solve that problem. I've got an idea." I have huge respect for the craftmanship.
__________________
Dale, NL4T
speedevil is offline  
Old 10-18-19, 06:43 AM
  #25  
unterhausen
Randomhead
 
Join Date: Aug 2008
Location: Happy Valley, Pennsylvania
Posts: 21,433
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 1,219 Times in 881 Posts
is the lever on the NDS seat stay for a dyno? I would like to see more pictures of the front of the bike, especially the rack
unterhausen is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -

Copyright © 2021 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.