Go Back  Bike Forums > Bike Forums > Classic & Vintage
Reload this Page >

Vintage collection

Notices
Classic & Vintage This forum is to discuss the many aspects of classic and vintage bicycles, including musclebikes, lightweights, middleweights, hi-wheelers, bone-shakers, safety bikes and much more.

Vintage collection

Old 03-31-20, 05:44 PM
  #1  
47Ronin
Junior Member
Thread Starter
 
Join Date: Mar 2020
Location: UK
Posts: 24
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Liked 43 Times in 13 Posts
Vintage collection

Hi All
I've come into a collection of my Dadís bikes as sadly he is no longer able to remain at home.
Whilst in lockdown here in the UK Iíve had them out of the shed looking over what there is and I hope to get at least a couple rideable soon. A couple are probably (or rather definitely) beyond my skills and the collection is rather daunting when I stand back.
Plus, there are 23 wheels in total... surely thereís a 24th somewhere 😂. Many are fiame (not sure of spelling, sorry). Most seem to be rims with glued on tubs. The tyres I donít think will be any good as most have been on for 15-20 years. There are probably 4 or 6 of what I would think of as normal rims, the type that take a tyre and an inner tube.
Also a Campagnolo Omega Strada hardex wheel set.

There's also a box of cycle parts including numerous pedals- some look like they have B8B on them.
A few chain rings, a couple marked CL Chater-Lea and a mix of Campagnolo and Suntour mechs.

So the bikes are:

Hetchins - frame number H12971 - almost rideable - pedals needed & I need to change the tubs???? or get a new wheel set..

Allin - frame number 999 - set up as a TT bike so need handlebar change and same as above on pedals & wheel front.

Carpenter Track Frame - no. 4690. - total build required.

Pink track frame - I canít find any identifying marks - single speed, ready to go but no brakes 😱

Ted Pritchard frame - frame no. 873. Total rebuild needed. Rusty so needs treating and sealing I guess but Iíd loathe to have it shot blasted as I love the original appearance. Would like to rescue it if possible and ride it still looking scruffy but original. I believe itís called patina 😂.

Last but but not least and a must resurrect for me -
Tandem Hobbs and Barbican- originally a track Tandem - the only numbers I can find are on the rear BB - three separate numbers 29 and 428 and A101.
re enamelled and rear mech attachments/braze ons added by Roberts late 70ís or early 80ís


Will post a few photos once Iíve passed 10 posts. And update with any progress made.

Thanks for reading and any advice gratefully received especially with should I use period parts or more modern parts. Also should I invest on modern wheels?

Thanks again
Nigel
47Ronin is offline  
Likes For 47Ronin:
Old 03-31-20, 06:22 PM
  #2  
SurferRosa
Senior Member
 
SurferRosa's Avatar
 
Join Date: Dec 2018
Location: Pac NW
Posts: 2,519

Bikes: old school 531c & Campy

Mentioned: 45 Post(s)
Tagged: 0 Thread(s)
Quoted: 1072 Post(s)
Liked 749 Times in 462 Posts
Sounds like a ton of good stuff and a ton of fun. With the tools and a workbench, you can do it all. Start with one bike. The one that fits you best.
SurferRosa is offline  
Likes For SurferRosa:
Old 03-31-20, 06:36 PM
  #3  
47Ronin
Junior Member
Thread Starter
 
Join Date: Mar 2020
Location: UK
Posts: 24
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Liked 43 Times in 13 Posts
Originally Posted by SurferRosa View Post
Sounds like a ton of good stuff and a ton of fun. With the tools and a workbench, you can do it all. Start with one bike. The one that fits you best.
Thanks SurferRosa.
Wish I knew more about it all on the building side of things.
Wheels, BB’s and head sets are a mystery to me 😂.
47Ronin is offline  
Old 03-31-20, 06:46 PM
  #4  
3alarmer
Friendship is Magic
 
3alarmer's Avatar
 
Join Date: Nov 2010
Location: The Big Tomato
Posts: 18,754

Bikes: old ones

Mentioned: 258 Post(s)
Tagged: 0 Thread(s)
Quoted: 17973 Post(s)
Liked 1,651 Times in 1,206 Posts
Originally Posted by 47Ronin View Post

Thanks for reading and any advice gratefully received especially with should I use period parts or more modern parts. Also should I invest on modern wheels?

Thanks again
Nigel
...I'm more of a period parts guy on stuff like those you list. But it sounds like you have some period parts in your misc boxes. Or you can rob them from other bikes in the collection.
If I have any useful advice, it is that this is supposed to be an enjoyable endeavor. So whenever it stops being enjoyable (you'll know), it's time to take a break and come back to it later.

Lately, I seem to be enjoying painting one or two frames a year. I only do it long enough to finish one frame at a time, so it remains enjoyable.

You're lucky if all those various bikes of your father's fit you well. All I inherited from my old man was a 1960 Cadillac with giant fins that got 9 mpg.
3alarmer is offline  
Likes For 3alarmer:
Old 03-31-20, 06:49 PM
  #5  
jdawginsc 
Edumacator
 
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 922

Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, Faggin Matrix thingy

Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 275 Post(s)
Liked 164 Times in 110 Posts
Originally Posted by 47Ronin View Post
Thanks SurferRosa.
Wish I knew more about it all on the building side of things.
Wheels, BB’s and head sets are a mystery to me 😂.
There are tons of videos and with some advice on here, just take it slow. Find one YOU'D like to keep and make it beautiful.

Headsets are mysteries to most people. Bottom brackets are surprisingly easy to understand and difficult to remove....

I'm sure if your dad is an enthusiast, he's got tools galore, and would be tickled pink for you to restore his beauties!
__________________
What is wrong with me...I can't stop! 1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl somethingorother, 1980s Vanni Losa Cassani thingy, 19something Massi blob...
jdawginsc is offline  
Likes For jdawginsc:
Old 03-31-20, 06:56 PM
  #6  
crank_addict
Senior Member
 
crank_addict's Avatar
 
Join Date: Aug 2013
Posts: 7,144
Mentioned: 93 Post(s)
Tagged: 0 Thread(s)
Quoted: 1361 Post(s)
Likes: 0
Liked 369 Times in 241 Posts
Welcome and sorry to hear of your father.

Good on you inheriting the enthusiasm for these classics! If possible, I would review some of them with your father- acquisition, history, if and where ridden, related old photo's, etc..

Listed are highly prized and collectable. Take detailed inventory, attempt to note specific components and details.

If mine, would strictly rebuild as preservation (no repainting, no modern wheels) and best attempt for period correct. Expect patience but fun hunting for parts.

Looking forward to seeing your projects.
crank_addict is offline  
Likes For crank_addict:
Old 03-31-20, 09:00 PM
  #7  
obrentharris 
Senior Member
 
obrentharris's Avatar
 
Join Date: May 2012
Location: San Francisco Bay Area
Posts: 2,929

Bikes: fewer (n-1)

Mentioned: 56 Post(s)
Tagged: 0 Thread(s)
Quoted: 780 Post(s)
Likes: 0
Liked 436 Times in 216 Posts
Your father's bike collection is stellar! Many of us would be proud to own just one of those bikes. I agree with the sentiment of trying to restore with period parts any bikes you plan to keep. Fortunately for you Ebay UK is a good source for most parts you might need for those bikes.

I agree with the approach suggested by SurferRosa . Start with one bike. You'll learn a great deal as you work your way through that one bike. Don't let the enormity of the whole endeavor deter you. The folks here are very knowledgeable and very helpful. When you aren't sure how to proceed post a photo or two of your project and you will get lots of help.

If you and your father are planning on selling any of the bikes don't put any more effort or expense into that bike than finding the correct parts in the collection to go with it. It is difficult, especially for someone not familiar with the nuances of vintage bikes, to recoup any money you put into them.

Brent

Last edited by obrentharris; 03-31-20 at 09:01 PM. Reason: redundancy
obrentharris is offline  
Likes For obrentharris:
Old 03-31-20, 10:33 PM
  #8  
merziac
Senior Member
 
merziac's Avatar
 
Join Date: Oct 2015
Location: PDX
Posts: 5,937

Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2

Mentioned: 128 Post(s)
Tagged: 0 Thread(s)
Quoted: 1767 Post(s)
Liked 662 Times in 487 Posts
Originally Posted by 47Ronin View Post
Hi All
I've come into a collection of my Dadís bikes as sadly he is no longer able to remain at home.
Whilst in lockdown here in the UK Iíve had them out of the shed looking over what there is and I hope to get at least a couple rideable soon. A couple are probably (or rather definitely) beyond my skills and the collection is rather daunting when I stand back.
Plus, there are 23 wheels in total... surely thereís a 24th somewhere 😂. Many are fiame (not sure of spelling, sorry). Most seem to be rims with glued on tubs. The tyres I donít think will be any good as most have been on for 15-20 years. There are probably 4 or 6 of what I would think of as normal rims, the type that take a tyre and an inner tube.
Also a Campagnolo Omega Strada hardex wheel set.

There's also a box of cycle parts including numerous pedals- some look like they have B8B on them.
A few chain rings, a couple marked CL Chater-Lea and a mix of Campagnolo and Suntour mechs.

So the bikes are:

Hetchins - frame number H12971 - almost rideable - pedals needed & I need to change the tubs???? or get a new wheel set..

Allin - frame number 999 - set up as a TT bike so need handlebar change and same as above on pedals & wheel front.

Carpenter Track Frame - no. 4690. - total build required.

Pink track frame - I canít find any identifying marks - single speed, ready to go but no brakes 😱

Ted Pritchard frame - frame no. 873. Total rebuild needed. Rusty so needs treating and sealing I guess but Iíd loathe to have it shot blasted as I love the original appearance. Would like to rescue it if possible and ride it still looking scruffy but original. I believe itís called patina 😂.

Last but but not least and a must resurrect for me -
Tandem Hobbs and Barbican- originally a track Tandem - the only numbers I can find are on the rear BB - three separate numbers 29 and 428 and A101.
re enamelled and rear mech attachments/braze ons added by Roberts late 70ís or early 80ís


Will post a few photos once Iíve passed 10 posts. And update with any progress made.

Thanks for reading and any advice gratefully received especially with should I use period parts or more modern parts. Also should I invest on modern wheels?

Thanks again
Nigel
Welcome aboard, glad you found us.

You could not be more in the right place.

And have the right mindset, this is a fantastic collection, you seem to have great cursory knowledge.

Some of the crusty, rusty can be the most satisfying to work with and mitigate, many times great results come from some fairly simple techniques.

You have an excellent opportunity to do your Dad proud.

Can't wait to see these.

Make it so.
merziac is offline  
Likes For merziac:
Old 04-01-20, 03:05 AM
  #9  
47Ronin
Junior Member
Thread Starter
 
Join Date: Mar 2020
Location: UK
Posts: 24
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Liked 43 Times in 13 Posts
Thanks everyone.
I’d like to keep them period where possible although I’ve never ridden a bike with tubs/tyres you glue on 😬
This is my 10th post so hopefully I can now post a few photos of some of the bikes and bits and pieces.
Stay safe everyone.
47Ronin is offline  
Likes For 47Ronin:
Old 04-01-20, 03:14 AM
  #10  
47Ronin
Junior Member
Thread Starter
 
Join Date: Mar 2020
Location: UK
Posts: 24
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Liked 43 Times in 13 Posts
Hi
Best start with a fresh faced youngster on his bike. Age 17 in his first time trial. It looks like he’s on a Hobbs which sadly isn’t in the collection.


47Ronin is offline  
Old 04-01-20, 03:23 AM
  #11  
47Ronin
Junior Member
Thread Starter
 
Join Date: Mar 2020
Location: UK
Posts: 24
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Liked 43 Times in 13 Posts
Here’s the ratty crusty Ted Pritchard which I think is beyond my limited skills although there is something about it that calls to me “please save me and take me out”. I guess it’s the condition that scares me.


47Ronin is offline  
Old 04-01-20, 03:32 AM
  #12  
47Ronin
Junior Member
Thread Starter
 
Join Date: Mar 2020
Location: UK
Posts: 24
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Liked 43 Times in 13 Posts
This one I think will be one of the first to do. Hobbs Tandem - track bike re- enamelled by Roberts and modified to take derailleur.
Some wheels, a couple of brooks saddles or equivalent, some period bars, pedals - I wonder if the 4x B8 ones in the box of bits are period ? And maybe that’s all it will take to get it on the road.

That 58 Chain ring might need changing for my little legs 😂



Last edited by 47Ronin; 04-01-20 at 04:18 AM.
47Ronin is offline  
Old 04-01-20, 03:39 AM
  #13  
47Ronin
Junior Member
Thread Starter
 
Join Date: Mar 2020
Location: UK
Posts: 24
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Liked 43 Times in 13 Posts
HA few bits and pieces :





There’s a Gran Sport derailleur in the box. The Nuovo Record is on the Tandem.
47Ronin is offline  
Likes For 47Ronin:
Old 04-01-20, 04:22 AM
  #14  
47Ronin
Junior Member
Thread Starter
 
Join Date: Mar 2020
Location: UK
Posts: 24
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Liked 43 Times in 13 Posts
The Carpenter track frame.


47Ronin is offline  
Likes For 47Ronin:
Old 04-01-20, 04:24 AM
  #15  
47Ronin
Junior Member
Thread Starter
 
Join Date: Mar 2020
Location: UK
Posts: 24
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Liked 43 Times in 13 Posts
The Allin which I’d like to change back to road from his TT set up.


47Ronin is offline  
Likes For 47Ronin:
Old 04-01-20, 04:28 AM
  #16  
47Ronin
Junior Member
Thread Starter
 
Join Date: Mar 2020
Location: UK
Posts: 24
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Liked 43 Times in 13 Posts
The Hetchins bought as a replacement early 80’s I think as his old one was stolen.



Some pedals needed and I’m still not sure about riding on tubs.
47Ronin is offline  
Old 04-01-20, 04:30 AM
  #17  
47Ronin
Junior Member
Thread Starter
 
Join Date: Mar 2020
Location: UK
Posts: 24
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Liked 43 Times in 13 Posts
Finally the Pink one 😎. No frame ID or number that I can find.


47Ronin is offline  
Old 04-01-20, 04:59 AM
  #18  
KenNC
Senior Member
 
KenNC's Avatar
 
Join Date: Oct 2013
Posts: 279
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 33 Post(s)
Liked 39 Times in 22 Posts
Wow great photo of your dad, and what a great collection of bikes! SO many interesting things! I really like the biplane fork crown on the pink frame. And I also really like the lugs on the Ted Pritchard--can't tell if those rough patches are severe rust or something else from the pics, but if not bad rust damage to the point of weakening structure then I'd definitely save that one too. Have never seen a track frame modified to take a derailleur.

I'd suggest identifying what wheels go with the tandem first, as sorting/replacing wheels can get expensive: They may have heavier spokes, more spokes, and/or wider spacing for the rear wheel. I would not be dissuaded from using the tubular rims, though that is a separate topic. In fact you've got the raw material here for lots of great posts.

I have found putting vintage bikes and frames back on the road an addictive hobby, and this forum a terrific resource. Good luck and I look forward to seeing the projects as they progress!
KenNC is offline  
Likes For KenNC:
Old 04-01-20, 06:52 AM
  #19  
bikemig 
Senior Member
 
bikemig's Avatar
 
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 17,032

Bikes: A bunch of old bikes and a few new ones

Mentioned: 140 Post(s)
Tagged: 0 Thread(s)
Quoted: 4523 Post(s)
Liked 820 Times in 581 Posts
Very cool collection and lots of great memories. As you rebuild these bikes, you might want to start an individual thread on each one. That way you document your build and you'll get some ideas from the posters how best to proceed.

I have my Dad's old bike. It's not as old as these, though. It's a 1993 Bridgestone XO 2; it's a fun bike to ride and yeah it has a lot of memories for me as well.

bikemig is offline  
Likes For bikemig:
Old 04-01-20, 07:02 AM
  #20  
repechage
Senior Member
 
Join Date: Jun 2006
Posts: 14,524
Mentioned: 91 Post(s)
Tagged: 0 Thread(s)
Quoted: 1383 Post(s)
Liked 349 Times in 275 Posts
Originally Posted by 47Ronin View Post
The Carpenter track frame.


carpenter often had well styled lugs.
looks like there may be the ownerís name on the top tube?
if your fatherís name, one to definitely reassemble.
repechage is offline  
Old 04-01-20, 07:31 AM
  #21  
73StellaSX76
Senior Member
 
Join Date: Mar 2015
Location: Redwood City, CA
Posts: 169

Bikes: 2016 SOMA DCD, 2014 Niner RLT9, 2008 Ibis Silk SL, 1998 Ibis Spanky, 1973 Stella SX76

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 30 Post(s)
Likes: 0
Liked 20 Times in 14 Posts
If possible, spend some time with your dad, remotely if necessary, and write down some of his memories of these bikes. It will serve a couple purposes: you’ll share some memories with him and also attach some provenance of interest and build details to the bikes which future owners may value. I especially like the old photo you posted.
73StellaSX76 is offline  
Likes For 73StellaSX76:
Old 04-01-20, 08:17 AM
  #22  
xiaoman1 
Slightly Mental
 
xiaoman1's Avatar
 
Join Date: Mar 2014
Location: Weird Coast City of the Angels
Posts: 2,977

Bikes: A few too many

Mentioned: 26 Post(s)
Tagged: 1 Thread(s)
Quoted: 612 Post(s)
Liked 350 Times in 242 Posts
Originally Posted by 73StellaSX76 View Post
If possible, spend some time with your dad, remotely if necessary, and write down some of his memories of these bikes. It will serve a couple purposes: you’ll share some memories with him and also attach some provenance of interest and build details to the bikes which future owners may value. I especially like the old photo you posted.
I could not agree more...much more important than restoration at this moment, spend the time now, not just to chat about bikes but life in general.
I think in the long run, it will mean much to you.
My best to you and your family, Ben
xiaoman1 is offline  
Likes For xiaoman1:
Old 04-01-20, 10:34 AM
  #23  
47Ronin
Junior Member
Thread Starter
 
Join Date: Mar 2020
Location: UK
Posts: 24
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Liked 43 Times in 13 Posts
Originally Posted by repechage View Post
carpenter often had well styled lugs.
looks like there may be the ownerís name on the top tube?
if your fatherís name, one to definitely reassemble.
Hi
yes his name is on there and his Cycling Club. It is one that I would like to ride. Iíve contacted a guy called John Gill who is very knowledgeable about Carpenter frames and the number corresponds to early 50ís.
Cheers.
47Ronin is offline  
Old 04-01-20, 10:46 AM
  #24  
47Ronin
Junior Member
Thread Starter
 
Join Date: Mar 2020
Location: UK
Posts: 24
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Liked 43 Times in 13 Posts
Originally Posted by xiaoman1 View Post
I could not agree more...much more important than restoration at this moment, spend the time now, not just to chat about bikes but life in general.
I think in the long run, it will mean much to you.
My best to you and your family, Ben
Hi
yes, once this dreadful Covid 19 situation has past and thereís no risk of taking the infection into the home I will take some photos with me and try to get some stories about the frames from him. Didnít really think anyone else would be interested. I know a little but definitely not enough.
47Ronin is offline  
Likes For 47Ronin:
Old 04-01-20, 11:01 AM
  #25  
TenGrainBread 
Senior Member
 
TenGrainBread's Avatar
 
Join Date: Sep 2015
Location: Madison, WI
Posts: 2,550

Bikes: Cherubim, Alps, a few Schwinns

Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
Quoted: 1054 Post(s)
Liked 358 Times in 237 Posts
What a fantastic collection. Your father has great taste in both frames and parts.

Re: the condition of the Pritchard, it looks like it's worth getting the paint and rust off to evaluate what's underneath. Both Mercian and Rourke Cycles do very nice restorations. They would be a good place to go to to get an evaluation. A light sandblast would probably reveal the true condition of the tubes.
TenGrainBread is offline  
Likes For TenGrainBread:

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information

Copyright © 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.