Go Back  Bike Forums > Bike Forums > Classic & Vintage
Reload this Page >

Vintage cycle stand

Notices
Classic & Vintage This forum is to discuss the many aspects of classic and vintage bicycles, including musclebikes, lightweights, middleweights, hi-wheelers, bone-shakers, safety bikes and much more.

Vintage cycle stand

Old 04-30-20, 01:42 PM
  #1  
robertj298 
Senior Member
Thread Starter
 
robertj298's Avatar
 
Join Date: Jun 2018
Location: NW Ohio
Posts: 1,101

Bikes: 1983 Univega Super Strada, 1986 Panasonic DX5000, 1984 Fuji Team 85 Univega Gran Turismo, 1984 Lotus Unique, 1987 Centurion Expert, 1987 Centurion Ironman Master,

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 658 Post(s)
Liked 419 Times in 169 Posts
Vintage cycle stand

A neighbor gave me this while cleaning out his garage. It's pretty heavy and I'm not sure how it works but
it looks sturdier than my cheap stand. Anyone ever see or use one?
robertj298 is offline  
Old 04-30-20, 01:54 PM
  #2  
thorstein
Junior Member
 
thorstein's Avatar
 
Join Date: May 2017
Location: Saint Paul, MN
Posts: 148

Bikes: 1969 Raleigh Twenty, 1975 Raleigh DL-1, 1984 Specialized Stumpjumper Sport, 1989 Schwinn Voyageur

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 75 Post(s)
Liked 48 Times in 30 Posts
Never seen one, but a quick search found this video:
thorstein is offline  
Old 04-30-20, 01:54 PM
  #3  
non-fixie 
Shifting is fun!
 
non-fixie's Avatar
 
Join Date: Aug 2009
Location: South Holland, NL
Posts: 10,301

Bikes: Yes, please.

Mentioned: 262 Post(s)
Tagged: 0 Thread(s)
Quoted: 1915 Post(s)
Liked 2,816 Times in 1,216 Posts
non-fixie is offline  
Old 04-30-20, 01:55 PM
  #4  
non-fixie 
Shifting is fun!
 
non-fixie's Avatar
 
Join Date: Aug 2009
Location: South Holland, NL
Posts: 10,301

Bikes: Yes, please.

Mentioned: 262 Post(s)
Tagged: 0 Thread(s)
Quoted: 1915 Post(s)
Liked 2,816 Times in 1,216 Posts
Hah!
non-fixie is offline  
Likes For non-fixie:
Old 04-30-20, 02:11 PM
  #5  
alcjphil
Senior Member
 
alcjphil's Avatar
 
Join Date: Jun 2002
Location: Montreal, Quebec
Posts: 5,183
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 1469 Post(s)
Liked 1,120 Times in 670 Posts
I have used one back in the early 1970's. Didn't work very well, bikes would often fall out and downtubes often were scratched by the clamp
alcjphil is offline  
Old 04-30-20, 03:49 PM
  #6  
Bladeputr13
Member
 
Join Date: Oct 2015
Posts: 43
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 15 Post(s)
Liked 2 Times in 2 Posts
That is pretty cool! Curious to see how effective it is.
Bladeputr13 is offline  
Old 04-30-20, 04:07 PM
  #7  
alcjphil
Senior Member
 
alcjphil's Avatar
 
Join Date: Jun 2002
Location: Montreal, Quebec
Posts: 5,183
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 1469 Post(s)
Liked 1,120 Times in 670 Posts
Originally Posted by Bladeputr13 View Post
That is pretty cool! Curious to see how effective it is.
They are not very effective. More than once while using the one we had, I had a bike fall out of the stand onto my head while bending over picking up something off the floor
alcjphil is offline  
Old 04-30-20, 04:21 PM
  #8  
Velo Mule
Senior Member
 
Velo Mule's Avatar
 
Join Date: Dec 2016
Location: Long Island, NY
Posts: 1,654

Bikes: Trek 800 x 2, Schwinn Heavy Duti, Schwinn Traveler, Schwinn Le Tour Luxe, Schwinn Continental, Cannondale M400 and Lambert, Schwinn Super Sport

Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 598 Post(s)
Liked 584 Times in 419 Posts
There have been a number of different brands of repair stands made to this same concept of holding the bottom bracket. Review on these tend to be mixed. Blackburn had a version of this style of repair stand and it was not built as heavily as this ANJ.

There is also a reason that Park stands and the copies are so popular. Even when applying lots of force trying to remove some stuck part, the bike is never at risk of falling out of the stand and the stands stance is big enough to get some force into the part your trying to remove. On my Park stand, I will even stand on the stand's feet and hold the bike with one hand while using the wrench with the other hand.

I think that if you used a Park or similar repair stand, you may be disappointed with this style. If you never used a Park, then you are probably more aware that you cannot put lots of force onto the bike, like when trying to remove the pedals or taping handle bars. If you take the bike out of the stand to do the heavy stuff and just use the stand to do adjustments and cleaning, I think you could be happy.
Velo Mule is offline  
Old 04-30-20, 04:26 PM
  #9  
Velo Mule
Senior Member
 
Velo Mule's Avatar
 
Join Date: Dec 2016
Location: Long Island, NY
Posts: 1,654

Bikes: Trek 800 x 2, Schwinn Heavy Duti, Schwinn Traveler, Schwinn Le Tour Luxe, Schwinn Continental, Cannondale M400 and Lambert, Schwinn Super Sport

Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 598 Post(s)
Liked 584 Times in 419 Posts
Originally Posted by alcjphil View Post
They are not very effective. More than once while using the one we had, I had a bike fall out of the stand onto my head while bending over picking up something off the floor
Maybe not! I never used one. The cost of getting wacked in the head is not worth it. Get a Park stand or one of the copies. Even the Aldi stand shouldn't surprise you.
Velo Mule is offline  
Old 04-30-20, 04:33 PM
  #10  
robertj298 
Senior Member
Thread Starter
 
robertj298's Avatar
 
Join Date: Jun 2018
Location: NW Ohio
Posts: 1,101

Bikes: 1983 Univega Super Strada, 1986 Panasonic DX5000, 1984 Fuji Team 85 Univega Gran Turismo, 1984 Lotus Unique, 1987 Centurion Expert, 1987 Centurion Ironman Master,

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 658 Post(s)
Liked 419 Times in 169 Posts
Originally Posted by Velo Mule View Post
Maybe not! I never used one. The cost of getting wacked in the head is not worth it. Get a Park stand or one of the copies. Even the Aldi stand shouldn't surprise you.
I already have the Aldi stand but since this was free I thought why not. It will make a nice display stand for vintage bikes.
robertj298 is offline  
Likes For robertj298:
Old 04-30-20, 04:43 PM
  #11  
merziac
Senior Member
 
merziac's Avatar
 
Join Date: Oct 2015
Location: PDX
Posts: 11,045

Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2

Mentioned: 218 Post(s)
Tagged: 0 Thread(s)
Quoted: 3453 Post(s)
Liked 3,547 Times in 2,192 Posts
Originally Posted by robertj298 View Post
I already have the Aldi stand but since this was free I thought why not. It will make a nice display stand for vintage bikes.
Shouldn't be rocket science, the guy in the video seems to have it figured out. The DT clamp should have at least a piece of hose like the BB cradle if not a contoured piece to protect the frame when secure.

These types of holding devices can need adjustment to hold well and may need a latch of some sort to keep from letting go when bumped or shifted, the design seems sound from here and I can guarantee I would have it working well if it were in my shop.

You may need to think outside the box a little.
merziac is offline  
Likes For merziac:
Old 05-01-20, 06:33 AM
  #12  
robertj298 
Senior Member
Thread Starter
 
robertj298's Avatar
 
Join Date: Jun 2018
Location: NW Ohio
Posts: 1,101

Bikes: 1983 Univega Super Strada, 1986 Panasonic DX5000, 1984 Fuji Team 85 Univega Gran Turismo, 1984 Lotus Unique, 1987 Centurion Expert, 1987 Centurion Ironman Master,

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 658 Post(s)
Liked 419 Times in 169 Posts
Originally Posted by merziac View Post
Shouldn't be rocket science, the guy in the video seems to have it figured out. The DT clamp should have at least a piece of hose like the BB cradle if not a contoured piece to protect the frame when secure.

These types of holding devices can need adjustment to hold well and may need a latch of some sort to keep from letting go when bumped or shifted, the design seems sound from here and I can guarantee I would have it working well if it were in my shop.

You may need to think outside the box a little.
He has it to work with just a bare frame.
You could do all you want to it but without major modifications it won't hold a bicycle as well as my cheap Aldi's stand.
robertj298 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -

Copyright 2021 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.