Bike Forums

Bike Forums (https://www.bikeforums.net/forum.php)
-   Classic & Vintage (https://www.bikeforums.net/classic-vintage/)
-   -   Looking for a wrench (https://www.bikeforums.net/classic-vintage/1224774-looking-wrench.html)

sloar 03-01-21 06:56 AM

Looking for a wrench
 
Iíve been trying to complete my tool collection, just got my Park headset press and race installer. Last thing Iím looking for is a 14,15,16 combo crank bolt wrench. I know Iíve seen them but now I canít find an example of one. Any help would be appreciated. Thanks

tiger1964 03-01-21 07:04 AM

BTW, I have one and use it, but especially on the 16mm end the outside diameter is a bit much, makes for a poor fit. Maybe some time spent on the grinder could help it out some.

sloar 03-01-21 07:08 AM

This isn’t a wtb thread, it’s a where can I find one thread. So if anyone knows a source let me know.

norskagent 03-01-21 07:16 AM

There's one on ebay right now:
https://www.ebay.com/itm/PARK-CCW-2-....m46890.l49292
There's also the hard to find Park 16mm.

juvela 03-01-21 07:38 AM

-----

tip -

prior to purchase make sure the 16 has thin enough wall to fit on Zeus

Zeus uses standard removal thread so there is very little room

would be a shame if you pay for a tool with a 16 only to find you still need to grind down a socket, or something, to fit Zeus

-----

JohnDThompson 03-01-21 07:46 AM

If you're intending to use the 16mm socket on a Zeus crank, be aware that the 16mm socket on the 3-way CCW-1 won't fit. You'll need either Zeus' own wrench or the Park CCW-16.

thinktubes 03-01-21 07:51 AM

Set up an ebay notification. It looks like about 2 get listed each month. They sell in the $25-40 range.

Park CCW-2 ebay sales history

oneclick 03-01-21 08:16 AM


Originally Posted by tiger1964 (Post 21946291)
BTW, I have one and use it, but especially on the 16mm end the outside diameter is a bit much, makes for a poor fit. Maybe some time spent on the grinder could help it out some.

I did that, the socket cracked at the corners after a bit. Then I got a proper six-point socket and ground that down, no cracks yet.

randyjawa 03-01-21 08:27 AM

I ground down a 1/2" drive 16mm socket, years ago. Twelve point and still working like a charm. Never thought to take a picture but it did happen.

tiger1964 03-01-21 09:38 AM


Originally Posted by oneclick (Post 21946395)
I did that, the socket cracked at the corners after a bit.

Thanks for the warning!:thumb:

Vintage_Cyclist 03-01-21 09:59 AM


Originally Posted by sloar (Post 21946282)
Iíve been trying to complete my tool collection, just got my Park headset press and race installer. Last thing Iím looking for is a 14,15,16 combo crank bolt wrench. I know Iíve seen them but now I canít find an example of one. Any help would be appreciated. Thanks

What is this ludicrous "complete" your tool collection concept of which you speak?

sloar 03-01-21 11:11 AM

Thanks for the help, my offer was accepted on the eBay auction.


All times are GMT -6. The time now is 10:58 AM.


Copyright © 2021 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.