Hello!
Was googling univega, came across this thread, read it, saw really nice pics, expert opinions from posters and general enthusiasm for univega. So, here is my, i believe, 1995 rover 301 in blue metallic. http://i30.tinypic.com/2s681nq.jpg Am going to post some more pics later, just took this with cell for a sneak peak. How can i tell whether this model (rover 301) was built by miyata? Here is serial # in case it helps univega experts D50101892 Thanks, and keep this thread alive :) |
Below are pics of my recently acquired Univega Gran Touring. I tore it down and rebuilt it with a 7-speed cassette and shifters. It is a very nice ride.
T-Mar, I would appreciate your analysis of the origins of this bike. The fork is stamped 1988 and I am sure it is part of the original package. The SS # is M8A 44520. Oh and just for comparison, I have included a pic of my former 1984 Miyata 1000 Thanks for looking. http://i23.photobucket.com/albums/b3.../IMG_0003r.jpg http://i23.photobucket.com/albums/b3...MG_0005r-1.jpg http://i23.photobucket.com/albums/b3...MG_0006r-1.jpg http://i23.photobucket.com/albums/b3...e/IMG_0007.jpg http://i23.photobucket.com/albums/b3.../IMG_2724a.jpg http://i23.photobucket.com/albums/b3...e/IMG_0007.jpg |
Originally Posted by tmh657
(Post 9201840)
I was going to post this bike last week since it cleaned up so nice and then saw the above post on here. This guy was asking about the bike I was selling so I just left it alone. It was odd in a small world kind of way. I definitely didn't want to comment on his prospective purchase.
Oh wait, I should have said, "offer him twice as much". He never contacted me after posting here.. It will be the first "real" bike for another person. The buyer was quite pleased when he test rode it as well as his buddy he brought with him for expert advice. I like the very fitting kickstand, hehe!,,,,BD |
Originally Posted by vega_rockets
(Post 9426809)
...So, here is my, i believe, 1995 rover 301 in blue metallic.
...How can i tell whether this model (rover 301) was built by miyata? Here is serial # in case it helps univega experts D50101892... The serial number would seem to imply a 1995 model. Unfortunately I have no 1995 literature, but 1994 had a Rover 3.3 and Rover 3,5, while 1996 had a Rover 300 and Rover 302 and 304 so I'm willing to go with 1995 having the odd numbered 301, 303 and 305 models. :)
Originally Posted by RFC
(Post 9426809)
...Below are pics of my recently acquired Univega Gran Touring. I tore it down and rebuilt it with a 7-speed cassette and shifters. It is a very nice ride.
T-Mar, I would appreciate your analysis of the origins of this bike. The fork is stamped 1988 and I am sure it is part of the original package. The SS # is M8A 44520.... You certainly like those Tektro levers!:D |
So I went out the other day with the intention of buying either an older Fuji Gran Tourer or Espree, but came away with something else, a single speed Univega Supra Sport. After trying everything out, this one just felt the best to me and was pretty darn cheap.
(not so great iPhone pics) http://i81.photobucket.com/albums/j2...8/6b6d0fae.jpg http://i81.photobucket.com/albums/j2...8/3aea5e7b.jpg http://i81.photobucket.com/albums/j2...8/81478cf7.jpg I barely know anything about bikes, but here are some of its features: single speed chromoly, triple butted frame mangalight forks shimano brakes continental tires alex ace 19 rims sugino cranks |
Originally Posted by T-Mar
(Post 9444924)
This doesn't match the Miyata serial serial number format. It's more typical of a Taiwanese format. Timeframe would also be correct for Taiwan.
The serial number would seem to imply a 1995 model. Unfortunately I have no 1995 literature, but 1994 had a Rover 3.3 and Rover 3,5, while 1996 had a Rover 300 and Rover 302 and 304 so I'm willing to go with 1995 having the odd numbered 301, 303 and 305 models. :) Serial number confirms a 1988 model. It's not of Miyata origin but would appear to be either a Mikki or Merida frame, depending on whether the respective country of origin is Japan or Taiwan. You certainly like those Tektro levers!:D Thanks T-Mar. The Tektros are, for me, the most comfortable non brifter levers. |
Univega Nuovo Sport, serial no. NS44493. A rough date of manufacture would be greatly appreciated.
http://i70.photobucket.com/albums/i9...s/100_0946.jpg |
Originally Posted by fanta510
(Post 9558336)
Univega Nuovo Sport, serial no. NS44493. A rough date of manufacture would be greatly appreciated...
|
Thanks!
|
How About This!?
1 Attachment(s)
How About This!?
Univega Activa ST - $165 Looks like a hybrid, more upright stem, commuter type bar. In the pics it looks like it has center-pull brakes. (??) ......"has 20.5" (52cm) Tange Chromoly frame with 12 speeds, Shimano SIS derailleurs and A frame. Fully tuned and gone over has new saddle."........ I'm shopping for an Urban Assault / Transporter so I can put my old Schwinn Suburban thru some major maintenance and a paint job. Oh, and I do dig the color! :p Sooo.... Deal or No Deal? |
Univega MysteryModel. 10-speed, with Shimano 600 derailleurs, Dia-Compe brakes, Shimano 105 hubs, Suntour freewheel. Serial no. J819038. A rough date of manufacture and possibly model name would be greatly appreciated!
http://i262.photobucket.com/albums/i...nivega_ful.jpg |
Originally Posted by TheCappucinoKid
(Post 9604459)
Univega MysteryModel. 10-speed, with Shimano 600 derailleurs, Dia-Compe brakes, Shimano 105 hubs, Suntour freewheel. Serial no. J819038. A rough date of manufacture and possibly model name would be greatly appreciated!
Integral dopout hanger, single bottle bosses, exposed brake nuts and clamp style downrtube shifters point towards a lower mid-range model, probably CrMo main tubes only. That's assuming their are no stem markings indicating a conversion from stem shifters. 27" wheelset? Seat post diameter? |
Originally Posted by T-Mar
(Post 9606523)
Manufactured by Miyata in 1981. A pretty high serial number, so almost certainly a 1982 model. The Shimano parts are probably replacemets. The 105 hubs, definitely are, as 105 made its debut in 1983.
Integral dopout hanger, single bottle bosses, exposed brake nuts and clamp style downrtube shifters point towards a lower mid-range model, probably CrMo main tubes only. That's assuming their are no stem markings indicating a conversion from stem shifters. 27" wheelset? Seat post diameter? http://i262.photobucket.com/albums/i.../handlebar.jpg http://i262.photobucket.com/albums/i...eardropout.jpg http://i262.photobucket.com/albums/i..._Kid/crank.jpg |
Highly unlikely to be a 1983, given the serial number is form 1981! Given the SR canks and Dia-Compe brakes, the 600EX derialleurs are probably upgrades, most likely from SunTour ARx. The tubing would not be triple butted, It's either double butted or plain gauge CrMo. No stem shifter marks would indicate it is proably a lower mid-range model. I have to research for a comparable model.
|
Super Strada perhaps? That came out in 82, is double butted, and has single bosses for the water cage. Also, the crank design appears similar. Although the Super Strada's appear similar to mine overall, haven't seen a model with completely chrome forks. Seems the crankring design and chrome forks would be the best indicators of the model.
|
full chrome forks tells me replacemet
|
Originally Posted by arborohs
(Post 9610365)
full chrome forks tells me replacemet
|
There's a super strada on ebay, full dura ace, sick. That bike is no super strada.
|
Originally Posted by 505oh505
(Post 9610518)
There's a super strada on ebay, full dura ace, sick. That bike is no super strada.
http://www.slackers.net/%7Eskoop/Ima...a_whiteCL1.jpg ...which looks very similar (there's even a bit of chrome on the top of the fork) and is a Super Strada, and some Super Stradas have Shimano 600 (some Dura-Ace, and some a more modern looking Shimano 600). Of course, I'm open to suggestions on what it might be. |
I know this aint what this is about but since you guys are the masters do you think this is any good?
http://boston.craigslist.org/gbs/bik/1359730001.html |
It was almost a good price, until they took all of the components off and sold them on ebay. Less is more these days I guess. Well, they could have bought it as a bare frame, but it doesn't fit the usual MO. Unless you can tell what model it used to be, stay away from it.,,,,BD
It also looks a hell of lot closer to a 58-59cm, unless I'm seeing things... |
Hi,
I've just picked up an old Univega Sportour and was hoping someone here could help me figure out what year it is. Here is a photo from when I picked it up - http://picasaweb.google.com/lh/photo...eat=directlink All I've done so far is put the bars back in the right position and use enough WD-40 to get it moving again. Here what seems like it might be useful: The serial no. is K297729 The frame is marked Made in Japan, Tange Champion, Double Butted The bars are Sakae Custom Road Champion It has Shimano 600 shifters/derailluers with Dia Compe brakes/levers Any ideas? Let me know if other info would help. Thanks, Nathan |
Originally Posted by snath1234
(Post 9706127)
Hi,
I've just picked up an old Univega Sportour and was hoping someone here could help me figure out what year it is.... |
just bought 2 more univega road frames , 1 off of e-bay and 2nd off craigslist....i was thinking of repainting the worse one of the 2 but wondered about where or how to go about getting some "univega " frame decals....? any ideas anyone ? thanks
|
more info
they are both red in color 1 is a "ital sport" model, the other is a "super sport" model....1 frame is in pretty decent shape overall cosmetic wise, the other is pretty scratched up and thats the 1 i want to repaint,i dont really care about the model name decals...just looking for some of the downtube,headtube and seat tube logo and name decals ....any info or ideas would be greatly appreciated.....mp
|
All times are GMT -6. The time now is 07:47 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.