Cheap steel tubing...
#1
Bottecchia fan
Thread Starter
Join Date: Aug 2003
Location: Colorado Springs, CO
Posts: 3,520
Bikes: 1959 Bottecchia Milano-Sanremo (frame), 1966 Bottecchia Professional (frame), 1971 Bottecchia Professional (frame), 1973 Bottecchia Gran Turismo, 1974 Bottecchia Special, 1977 Bottecchia Special (frame), 1974 Peugeot UO-8
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 33 Post(s)
Likes: 0
Liked 10 Times
in
8 Posts
Cheap steel tubing...
If you search you'll find there are enough threads on high-end steel tubing to weave your own tapestry but nobody talks about the cheap stuff despite the fact that it's on 90% of the bikes out there. Everybody lumps it all together as "gas pipe" but there must be some differences to explain why some gas pipe bikes weight 45-lbs while others weigh 27-lbs and it can't all be components. So what's the difference between low-carbon and hi-carbon steel? 1010 vs. 1020 steel. Mangaloy? House brands like "Tube Special Allege Peugeot" or Carbolite or HLE? What's special about that tubing that they felt the need to put decal on the frame? What about the welded frames on old Murrays and Huffys vs. lugged, brazed construction on entry level European bikes?
I like to think of the 531 and Columbus frames of the day as being equivalent to those on $7000+ bikes today, the top of the line. Surely everything else wasn't gas pipe with nothing in between.
I like to think of the 531 and Columbus frames of the day as being equivalent to those on $7000+ bikes today, the top of the line. Surely everything else wasn't gas pipe with nothing in between.
__________________
1959 Bottecchia Milano-Sanremo(frame), 1966 Bottecchia Professional (frame), 1971 Bottecchia Professional (frame),
1973 Bottecchia Gran Turismo, 1974 Bottecchia Special, 1977 Bottecchia Special (frame),
1974 Peugeot UO-8, 1988 Panasonic PT-3500, 2002 Bianchi Veloce, 2004 Bianchi Pista
1959 Bottecchia Milano-Sanremo(frame), 1966 Bottecchia Professional (frame), 1971 Bottecchia Professional (frame),
1973 Bottecchia Gran Turismo, 1974 Bottecchia Special, 1977 Bottecchia Special (frame),
1974 Peugeot UO-8, 1988 Panasonic PT-3500, 2002 Bianchi Veloce, 2004 Bianchi Pista
#2
juneeaa memba!
Join Date: Oct 2003
Location: boogled up in...Idaho!
Posts: 5,632
Bikes: Crap. The box is not big enough...
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 13 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
none of it was gas pipe. That stuff wouldn't work very well, and a frame would be measured in 10's of pounds. that said, the non-butted standard tubesets for low end bikes was nothing that you'd want to brag about. Low carbon steel is not very stiff, and requires more material to be suitable for a bike frame. That would be roughly why all of the cheaper stuff is relatively heavy (and not so flexible). The cheaper tubes were rolled from sheet stock instead of drawn from solid material, so they also have a seam. That seam is weaker than one-piece steel, and subsequently requires more material to get a safety margin for this application. like before, more material => heavier bike.
People like stickers with cool names like Carbolite, though. Girls want to check out a guy with cool stickers, huh?
People like stickers with cool names like Carbolite, though. Girls want to check out a guy with cool stickers, huh?
#3
Bottecchia fan
Thread Starter
Join Date: Aug 2003
Location: Colorado Springs, CO
Posts: 3,520
Bikes: 1959 Bottecchia Milano-Sanremo (frame), 1966 Bottecchia Professional (frame), 1971 Bottecchia Professional (frame), 1973 Bottecchia Gran Turismo, 1974 Bottecchia Special, 1977 Bottecchia Special (frame), 1974 Peugeot UO-8
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 33 Post(s)
Likes: 0
Liked 10 Times
in
8 Posts
none of it was gas pipe. That stuff wouldn't work very well, and a frame would be measured in 10's of pounds. that said, the non-butted standard tubesets for low end bikes was nothing that you'd want to brag about. Low carbon steel is not very stiff, and requires more material to be suitable for a bike frame. That would be roughly why all of the cheaper stuff is relatively heavy (and not so flexible). The cheaper tubes were rolled from sheet stock instead of drawn from solid material, so they also have a seam. That seam is weaker than one-piece steel, and subsequently requires more material to get a safety margin for this application. like before, more material => heavier bike.
People like stickers with cool names like Carbolite, though. Girls want to check out a guy with cool stickers, huh?
People like stickers with cool names like Carbolite, though. Girls want to check out a guy with cool stickers, huh?
What I suspect is that it's not so much about the strength of the raw tubing but rather the ability of the tubing to withstand the joining method. The actual steel used might have been the same (something I'm hoping someone might answer here) but the heat of welding or electro-forging probably weakened it so much that very thick tubes had to be used to make up for that. I measured the seat tube on my UO-8: it's 28.0mm outside diameter (French) and 26.0mm inside diameter or 1.0mm thick walls. That might not be as good as 531 Professional but it's not horrible. I wonder how thick the tubing is on a Murray or a Schwinn or similar bike?
__________________
1959 Bottecchia Milano-Sanremo(frame), 1966 Bottecchia Professional (frame), 1971 Bottecchia Professional (frame),
1973 Bottecchia Gran Turismo, 1974 Bottecchia Special, 1977 Bottecchia Special (frame),
1974 Peugeot UO-8, 1988 Panasonic PT-3500, 2002 Bianchi Veloce, 2004 Bianchi Pista
1959 Bottecchia Milano-Sanremo(frame), 1966 Bottecchia Professional (frame), 1971 Bottecchia Professional (frame),
1973 Bottecchia Gran Turismo, 1974 Bottecchia Special, 1977 Bottecchia Special (frame),
1974 Peugeot UO-8, 1988 Panasonic PT-3500, 2002 Bianchi Veloce, 2004 Bianchi Pista
#4
Disraeli Gears
The 70s Raleigh Grand Prix with 1020 tubing had "normal" 1-1/8" outside diameter seat tube, and takes a 25.4 mm (1") dia. seat post. So the wall thickness is: 1/16", minus a tenth of a mm for clearance = 1.5 mm.
#5
Bottecchia fan
Thread Starter
Join Date: Aug 2003
Location: Colorado Springs, CO
Posts: 3,520
Bikes: 1959 Bottecchia Milano-Sanremo (frame), 1966 Bottecchia Professional (frame), 1971 Bottecchia Professional (frame), 1973 Bottecchia Gran Turismo, 1974 Bottecchia Special, 1977 Bottecchia Special (frame), 1974 Peugeot UO-8
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 33 Post(s)
Likes: 0
Liked 10 Times
in
8 Posts
Interesting. So maybe "Tube Special Allege Peugeot" is special.
__________________
1959 Bottecchia Milano-Sanremo(frame), 1966 Bottecchia Professional (frame), 1971 Bottecchia Professional (frame),
1973 Bottecchia Gran Turismo, 1974 Bottecchia Special, 1977 Bottecchia Special (frame),
1974 Peugeot UO-8, 1988 Panasonic PT-3500, 2002 Bianchi Veloce, 2004 Bianchi Pista
1959 Bottecchia Milano-Sanremo(frame), 1966 Bottecchia Professional (frame), 1971 Bottecchia Professional (frame),
1973 Bottecchia Gran Turismo, 1974 Bottecchia Special, 1977 Bottecchia Special (frame),
1974 Peugeot UO-8, 1988 Panasonic PT-3500, 2002 Bianchi Veloce, 2004 Bianchi Pista
#6
Senior Member
Quality mild steel tubing(1020 or 1060)is fairly thin gauge, and usually has a very light seam. Cheap, really cheap tubing like that used on very cheap department store brands (in the day I mean) was way thicker than neccessary, and if you look in the tube, you see a very heavy seam. I think the thickness of the tubes is the real weight maker.
#7
Senior Member
Join Date: Aug 2007
Location: Ontario, Canada
Posts: 378
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Steel comes in an infinite variety of alloys. There are significant differences between low carbon steel, high carbon, chromoly, mangaloy, etc. Butting the tubes seems to be specific to bicycles and really helps to shave off a few more ounces from where the tubes have too much metal. I'd say the stickers are a marketing ploy, but also a way to tell the consumer what they are getting.
To generalize, if the alloying metals increase the yield strength the tubes can be made thinner and withstand the same loads without failing as a thicker (heavier) tube set would. As they are thinner they are also more flexible, as alloying does not increase the stiffness of steel - the tube dimensions control that. Look around with Google and you'll find many places explaining this in greater detail.
Low end 'gas pipe' tubing is plain mild steel. Mid line tubes would be non-butted chromoly or manganese steels. A slight change in alloy and adding butting to these and you get Reynolds 531, Tange #1 etc .. As well, the mix of tubes in the frame made a difference in costs - full 531 stays and forks vs. plain mild steel could save a full pound or two from a frame. Bare frame and fork weight is a good indication of steel quality, as is the seat tube diameter.
To generalize, if the alloying metals increase the yield strength the tubes can be made thinner and withstand the same loads without failing as a thicker (heavier) tube set would. As they are thinner they are also more flexible, as alloying does not increase the stiffness of steel - the tube dimensions control that. Look around with Google and you'll find many places explaining this in greater detail.
Low end 'gas pipe' tubing is plain mild steel. Mid line tubes would be non-butted chromoly or manganese steels. A slight change in alloy and adding butting to these and you get Reynolds 531, Tange #1 etc .. As well, the mix of tubes in the frame made a difference in costs - full 531 stays and forks vs. plain mild steel could save a full pound or two from a frame. Bare frame and fork weight is a good indication of steel quality, as is the seat tube diameter.
#8
Decrepit Member