ISO: Phil Wood BB mounting rings, British thread, either steel or alloy
Have: Steel rings in Italian or French threading |
ISO: fork for a PX-10, nervex crown with simplex drop outs, half chrome, for a 58 cm ctc frame?
|
ISO 80-90MM quill stem, black, for a 25.4 diameter bar.
|
Originally Posted by Lazyass
(Post 16839786)
ISO 80-90MM quill stem, black, for a 25.4 diameter bar.
|
Long shot...
I need a longer bottom bracket for my new Jeff Lyon L'Avecaise. Trade my 116mm Phil titanium BB, British threaded, JIS taper, for a longer one (119-122mm will work) (must be Ti). The Phil is their top of the line one, with the Magnesium shell. It's in excellent shape. |
For Trade:
Velo Orange 110mm BB JIS threadless type. New EighthInch 107mm BB JIS, New, was mounted in a frameset. Sun Race friction thumb shifters, New in plastic. Schwinn approved high flange hubset, made in France, used 36h Delta Megarack Ultra, NEW NewBaum's tape. 2 rolls of gray, and 2 rolls of red Uno Kalloy, 30.8mm 300mm long seatpost. NEW, silver. SR Sakae custom Modolo anotomic bend handlebars, dating to the 90s. Very little use, very clean overall. 6 foot cable and lock, I have 10 of these. Schwinn approved high flange hubs, 36h. made in France. Used, need repacked and work. EighthInch bull horn road bars, New, 42cm wide o-o. black. Used crankset Shimano FC-m520 triple. used...scratches included I have tons of simple items as well to fill in the gaps for any trades. Cobra tire levers Lizard Skinz bar end plugs. ISO: 700c suspension fork 700c double wall wheelset, 7 speed would be great. But I am willing to barter on anything. This will be used for cross/mtb riding. |
Originally Posted by lord_athlon
(Post 16425897)
ISO Suntour Ratcheting Barcons, Long Cage Suntour VX/V/Cyclone -GT Rear Mech, Clamp on Downtube Suntour Power Ratchets
Trade: 172.5 Shimano 600 Crank, Various 130bcd Chainrings, Tange Spindle for said Cranks, 600 Short Reach Single Pivot non SLR Brakes with adjusters, 600 SIS Rear Derailleur, 600 Aero Levers with white hoods that have seen better days. https://scontent-a-dfw.xx.fbcdn.net/...16119289_n.jpg https://scontent-a-dfw.xx.fbcdn.net/...97715747_n.jpg Stock with these 600 cranks https://scontent-b-dfw.xx.fbcdn.net/...66892394_n.jpg Nicer Biopace in silver. https://scontent-b-dfw.xx.fbcdn.net/...49387729_n.jpg |
I have a black Brooks B17 that is in great condition. Looking for a Campagnolo Proton 700C Front wheel or similar looking black front wheel with 24 black spokes to match the rear I picked up if anyone has one laying around?
http://i951.photobucket.com/albums/a...ps71a92a25.jpg http://i951.photobucket.com/albums/a...ps9fdcc787.jpg |
ISO: vintage cyclometer, something old but working, cosmetic not a priority
28" (700c) non-plastic kilometer or miles, bracket or missing mount OK thanks |
Originally Posted by crank_addict
(Post 16862203)
ISO: vintage cyclometer, something old but working, cosmetic not a priority...
http://i430.photobucket.com/albums/q...psa94e37d6.jpg If you're quick, you might be able to get in line before the other two are gone. :) |
Yeah, the BOC contains a tiny, very old counter. Looks like brass, with a small sprocket on the side. No idea how it's driven or mounted. It is about 1/3 the size of the plastic Huret counter above.
|
^ thanks for the heads up. BOC I seek :thumb:
|
Looking for a Cinelli Criterium trade:
Have: Cinelli 65-40s in excellent shape Need: Cinelli 65-44s (or maybe 42s) TIA -Mark in St. Louis |
I've got too many wheel sets sitting around…maybe we can trade one of them for something more useful (to me):
Have: Mavic Open 4 CD SUP rims (dark grey ano) laced with DT spokes to beautiful silver Campy Athena hubs…have been converted to run 9/10/11s, nice shape with good brake tracks, slight extra ano loss on front track from errant brake pad placement. ISO: -Decent 25mm tubulars -Fizik Aliante saddles -Specialized Romin Evo or Phenom saddles -Speedplay Zero pedals -Deda Zero 100 stems (110/120) and bars (42/44) - or ??? TIA -Mark in St. Louis |
ISO
Suntour Accushift XCT rear derailler, PM me if you have one to trade. Have Lots of odds and ends. |
Have, Lots of rain and hot temperatures here in Cambodia, will wave my arms and swing a big fan to move some of it your way :).
Want, a couple of (3 or 4) front centerpull brakes complete with cable hanger, clamp, cross wire, brake set, nuts and bolt, pads. I don't need the cable, housing or levers. These are for a couple of guys that ride lots over here in Cambodia who don't have much money and I would like to change out their front brakes to something that works a lot better than what they have. These will be sent to my daughter in Pennsylvania and she will get them to me cheap. These need to be of a fairly long reach. |
Originally Posted by buldogge
(Post 16864648)
I've got too many wheel sets sitting around…maybe we can trade one of them for something more useful (to me):
Have: Mavic Open 4 CD SUP rims (dark grey ano) laced with DT spokes to beautiful silver Campy Athena hubs…have been converted to run 9/10/11s, nice shape with good brake tracks, slight extra ano loss on front track from errant brake pad placement. ISO: -Decent 25mm tubulars -Fizik Aliante saddles -Specialized Romin Evo or Phenom saddles -Speedplay Zero pedals -Deda Zero 100 stems (110/120) and bars (42/44) - or ??? TIA -Mark in St. Louis |
1 Attachment(s)
ISO: Cateye Cordless 2 sending unit, the one that looks like this:
http://i734.photobucket.com/albums/w...p/73c3d87a.jpg http://bikeforums.net/attachment.php...hmentid=388408 Black or clear, doesn't matter. Have a lot of little parts, what do you need? |
1 Attachment(s)
http://bikeforums.net/attachment.php...hmentid=388803
ISO I recently acquired a Schwinn Crisscross (1991 I think). It must have been in a pile of junk because the front reflector bracket was bent back and had deeply scraped the head badge. The existing badge reads "Schwinn Quality", and has a date code of 14xx (the rest is not legible). The serial number on the bottom bracket reads GE018801/606730B4. Anyway, I'd like to replace the head badge with a similar one. |
ISO: TA Specialties crank dust cap. One only.
No biggie and just thought by chance anyone might have a spare. With the exception of our tandem, I normally ride the other bikes without crank caps. Just noticed I'm missing one! Fleabay sellers have them for $50 but that's as crazy attempting a wheelie on a tandem! |
Looking for a Victor pedal cap...these were the poor cousin to the Suntour Bear trap pedal but still well made. I've tried other dust caps but no match. I have lots of stuff, brit and other. Spare parts, no problem
This is for my rebuild of the fugly C-dale. TIA https://lh5.googleusercontent.com/G0...w368-h207-p-no https://lh6.googleusercontent.com/fe...w368-h207-p-no |
ISO: Downtube Shifter Adaptor (ie. a clamp-on set of bosses to install a shifter to). Only *need* one boss, but two will work too. Something that is functionally like this: Amazon.com : Origin8 DownTube Shifter Adapter - 31.8/28.6mm, Black : Bike Shifters And Parts : Sports & Outdoors . Something shinier and classic would be cool -- this would be perfect if you have one: Vintage Huret Clip on Single Gear Lever Adapter | eBay . Standard Reynolds 531 downtube size..thats 28.6mm right?
I've decided my British Portuer is going to have its 1x7 setup replaced by the S3X wheelset I picked up on the cheap. I've got a bar-end shifter but would prefer to mount it on the downtube. To trade: Lots of odds and ends...Derailleurs (Deore, LX), Cinelli stem/bar, etc etc etc. |
Lost my Dunelt/Phillips fork caps. Had to take them out when getting the fork steerer tube replaced.
Anyone got a set? They look like these, and are usually chromed. Shot chrome is actually ok- I'll nickel them or strip 'em to copper... http://i97.photobucket.com/albums/l2...fork_crown.jpg I have a bunch of bits to trade. Anyone want an early Silca mountain bike pump with the silca presta head? Some pre-QBP Salsa Ti skewers? |
ISO: Handlebars
I'm looking for a good condition VO Grand Cru Chris's Rando, Nitto Rando, or GB Randonneur in a 44 or 46cm. I have quite a lot of trade bait, a good bit of which is from the 70's and 80's. |
ISO
campagnolo ds only crank arm 175 8/9 speed any level as long as it goes with a 102mm bb square taper OR campagnolo crank arms 172.5/175 to go with same bb also 8/9 preferred. I don't need rings or any bolts, just the arms. TIA --Greg HAVE campy wall art |
All times are GMT -6. The time now is 09:28 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.