fieldrecordings

ISO -
Dura-Ace 7400 bits
brakes
levers
shifters
f/r ders.

also, more urgently, Shimano 600 front brake w/non-recessed brakebolt.

Thanks!

Old Fat Guy

Changing directions yet again.

I was saving this Suntour Cyclone stuff for my Schwinn Voyageur SP, but have taken a different direction.

The Brooks Swallow came off a 1962 Raleigh Gran Sport, is in decent condition, and has never been tensioned.

I'm looking for a Shimano 10 speed triple crank, RD and FD, Ultegra or 105, and a rear wheel, suitable for light off road riding with a Shimano compatible 10 speed hub.

Detailed pictures here:
https://picasaweb.google.com/zmudshark/Cyclone#

bibliobob

Want:

Campy 9 spd. rear derailleur for a triple. I believe that a medium would work? Veloce or racing triple?

Really, I'd consider anything other than Mirage. Needs to function well but cosmetics aren't important.

Have:

Cash or some Campy NR odds and ends. Cinelli or TTT bars and stems. Wrights swallow cut saddle? NR pedals? Let me know what you're looking for; I might have it.

Thanks!

banjo_mole 

ISO: GIOS Pantographed stem. (Like this!)

Samwiches

Want:

Gum hood aero levers -- any brand or condition considered

High Fist Shin

ISO:

Alloy crank, 52/42 rings or the like. Sugino, Sakae or something similar, inexpensive. This is for a Raleigh Super Grand Prix rebuild. The original crank had a crack in the spider.

Have: Forbidden! And a ton of trade goods. What do you need?

mudboy

I have an SR right crankarm. 170mm, 130mm BCD. I think you're somewhat local to me, yours free if you pick it up.

Pete

High Fist Shin

Thanks, Pete. I've gotten some other offers but will keep yours in mind.

And yes, I'm not too far away. You, me and -holiday76 should go for a ride sometime.

johnprolly

In search of a Dura Ace wheelset to top off my 7400 group-equipped MXLeader Merckx. 8 spd DA hubs to Mavic rims would be nice. Clincher please. Email me if you've got anything laying around.

Also, Cinelli Pista bars, 42ctc please.



In BK so obviously, I'll pay for s/h.

THANKS!

yellowjeep

Johnprolly, check ebay. In the past week I have seen 7400 DA hubs laced too a multitude of different rims ranging from 50 to 100 +shipping. I wound up with DA laced to open pros for 121 shipped with tires.

johnprolly

Alloy models are fine. i.e. not steel milano crested bars. They're for my SLX Merckx Stuttgart Pista. I found a crack on my 3ttt Pista bars (adjacent to the clamp sleeve) and I have Criterium bars on it now.

johnprolly

Thanks. yeah, I've been scouring ebay. Was just checking here as well...

RobbieTunes

ISO:

1- Wide range (14-32 or close) Uniglide cassette, 6-sp if possible.

1- Smaller range (13-24 or so) 7-sp Uniglide cassette to replace a 6-sp model. Moved to 7-sp RSX brifters.

Have lots of stuff and the forbidden fruit...I'd prefer to trade, but am not going to list my parts box.....

Caferacernoc

WTB:
Decent RD. Something that bolts right on the frame. Not the kind with the extra hanger.

JunkYardBike

Have: San Marco Regal Ti, black, excellent condition
Want: Regal, Rolls, Turbo or similar in solid yellow or orange, same condition

stachemaster

edit: wheelset found

RobbieTunes

PM Sent

fieldrecordings

Forgot to add bottom bracket!

digitalbicycle

Have:
Red 1986 Schwinn Cimarron frame, decent condition, 18" (46cm) c-t seat tube, 55cm c-c top tube. Has full set of touring brazeons. It's got the original Shimano BB and a Tange G Master headset (don't think that's original). If you want, I can also throw in the original cranks and Deer head front and rear derailers.

Want:
Nitto or Surly racks
Nice 26" wheelset, preferably 126mm for a 7spd freewheel
8cm Nitto Dirtdrop stem
Silver aero bars, 42cm or 44cm
Assorted other stuff for the 26" tourer I want to build
Or something interesting
Email me at: jimsonweed **at** riseup **dot** net, I often read this board without logging in so I don't always check my PMs

kramnnim

Have:

Nearly full 600 tricolor group from ~1993? 8 sp brifters, 170mm cranks, English BB. MA40 rims, virtually no brake wear on the anodizing. 27.2 aero seatpost, 1" threaded HS, no pedals. Dual pivot calipers, brazeon FD. Not quite NOS, but close...

1993ish LeMond, Gan team colors, Excelle GLX tubing. 54cm. Campy drops, Cinelli lugs. Chain hanger pin on the seatstay and number brazeon on the underside of the top tube got knocked or ground off...dent in the top tube neat the head tube. Chorus cranks and calipers, Record RD and FD (?) and 8sp Ergopowers (pointy hoods). Campy "Scirocco 20" wheelset. Bike has been well used, and not cared for...quite unlike the bike the 600 group was from.

Want: 1" carbon fork, threadless, AL steerer. Geared 29er wheelset, and other modern, non entry level MTB parts. A similar frame to the LeMond, but with an English BB. Forbidden produce may be considered...

sjpitts 

Have:

A pair of DuraAce 10 Speed Bar End Shifters-- model SL-BS78. Used. Includes some cables.

Want:

Any of the various parts I need for my vintage tri bike build:

Profile Design Fast Forward Seatpost. Prefer the carbon 27.2 version.
Bar End Shifter pods (the rivendell things that let you use vintage downtube shifters as bar end shifters)
Wing style TT handlebars (in wider 44cm width)
Wheelset that can take suntour seven speed freewheel (the screw on type)
Conti Grand Prix 4000 700x23c or other quality tires

Will add or take cash as needed. I also have a Profile Design T2 Wing Base Bar, in 40cm width and 31.8mm clamp, that I would be willing to trade away if I find a wider bar. And I still have my 61cm Schwinn Circuit Frame, but I was still hoping to avoid shipping that.

junkfoodjunkie

found

OneMoreGear

ISO: Shimano 600 Brake levers. Must have the Tricolor band.

Please get in touch if you have these. Thanks!

23skidoo

I'd like to find the fixing bolt and bar band clamp assembly for a Modolo brake lever; I picked up a pair in decent shape just for the hoods but decided to keep them intact as a set if I can find the missing parts. If you've got some that are trashed but could salvage the parts I'm seeking, drop me a PM. I'd happily reply in kind or send a little $$.

YoKev

For LOCAL trade:

Still available is my 1959 Gazelle 3-speed TCW geared bike. It was marketed as a JR model, and it is in exceptional shape. The cranks are 145mm in length if I remember correctly. Great for a smaller rider!! The fork may be tweaked very oh so slightly, but it doesn't always look that way; just this forum getting me paranoid It rides just fine.

For LOCAL trade, Hudson Valley. I'm in Kingston, NY 12401. I'm cool with driving a little bit if it means it will have a great home. Please be honest with your intentions. I want it to be ridden by someone who cherish and enjoy it, not flipped for profit.

If you have a nice road frame set with British threading in a 52cm that would be super, and I could entertain other trades/frames/bikes as well. Please PM if interested and we'll take it from there.