chico81 

I hope a Paramount lover picks it up!

phtomita

Bianchi Eros 61cm - $350 (Bremerton)


https://seattle.craigslist.org/kit/b...893921034.html

24 speed, Campagnolo brakes, wheels, shifting, cranks, etc., about 1998 bike made in Italy, needs tires. call or email

thumpism 

C&V&O (Old!)

https://richmond.craigslist.org/bik/...893828667.html

Antique High Wheel Bicycle - $4895 (Mathews va.)
bicycle frame material: steel
bicycle type: other
frame size: 54inch
wheel size: other/unknown

1884-1886 High Wheeler. 54 inch Wheel. Good tires,ready to ride! Mostly Columbia with a few parts from Victor. At least 133 years old,so parts get replaced over that period of time. Stand is included.
$4895.00 Cash In Person! I will remove the add when sold.
Only Trades considered is a Model A or T Ford.
804-3 seven 0- 1 six two 2

JohnDThompson 

Not sure of the quality, but probably adequate to clean/chase existing threads, and the starting price is certainly reasonable. Probably prudent to check the thread spec with the seller:

Bicycle Bottom Bracket Thread Drill Die Tool/Lathe Model Engineer Threading Kit

https://www.ebay.com/itm/18382028672...&ul_noapp=true

madpogue 

^^^^^^^^ The description (BC24R + BC24L) suggests that it's RH + LH thread. Besides, if it were just RH thread, wouldn't you need only one?

audiomagnate

Can someone explain to me why this bike is worth so much?

JohnDThompson 

Good catch; I missed that. Posted before the caffeine hit.

For a piloted tap set like this, it's good to have a tap on both sides to ensure that both sides are coaxial.

obrentharris 

I can't make heads or tails of this item description:

Brent


"DescriptionMaterial: steelWeight: approx 2kgUses: Due to the damage of the threaded rod caused by the middle shaft set, the five-way thread has its own burr, the thread is too shallow, the thread is not concentric, and the paint residue is trimmed.Dental knife: The dental knife is made of titanium on the outer layer and is durable. The handle is equipped with a concentric rod to ensure the concentricity of the five-pass tooth. When used in combination with the cutting oil, it can not only protect the dental knife, but also smooth the tapped teeth and achieve good results.E17L: Five-way shaft cutter. Inch ( 1.37" BC24R), the right tooth is mounted on one side with a concentric column.E17R: Five-way shaft cutter. Inch ( 1.37" BC24L ), the left tooth is installed on the side without the concentric column."

curbtender

My neighbor made a living writing instructions for products in English. They could probably use him...Sounds like they want you to clean starter threads of paint with an exact knife.

Bianchigirll 

I was taught to use them in unison. Install them both and turn together, for chasing/cleaning anyway

madpogue 

Yeah, makes sense now.

due ruote 

Very nice Trek; belongs to a forum member. I checked it out yesterday and would have bought it, but it’s way too big for me and parting it out felt all sorts of wrong. Looks better in person btw.
Sorry but I guess I don’t know how to grab a CL pic on my phone and insert in a post.

https://chicago.craigslist.org/nch/b...888543768.html

madpogue 

How to post photos with a phone: Use your phone to find the nearest library or coffee joint that has a real computer.

Yeah, that's a tall cool one. Alas, my 6'4" friend has a total blind spot for C&V; he's bitten by the black carbon bug. He's even given up on maintaining his 20-ish-year-old Cannondale hybrid, just as it's "coming of age".

madpogue 

So the divergent prices are starting to converge. The $325 Tempo is down to $290, and the $100 one is UP to $200. (Links above still apply.)

cdmurphy

I think they mean the taps themselves when they say "Dental Knife". They have teeth ("dental"), and they cut ("knife"). It seems they were listing common uses for the bottom bracket tap: 1)Damage from the bottom bracket itself, 2)Threads have burrs, 3) Threads aren't deep enough, 4)Threads are mis-aligned, 5)Threads are full of paint residue.

The giveaway was them talking about the "dental knife" having titanium on the outside -- That's the gold color to the taps -- a thin layer of Titanium Nitride, a very hard ceramic coating that improves wear and cutter life.

Rocket-Sauce 

https://boston.craigslist.org/bmw/bi...894860024.html

Rivendell Sam Hillborne - $2800 (Topsfield)

For sale a Rivendell Sam Hillborne the is used but is in mint condition. Please contact me for additional information.

Rivendell Sam Hillborne 56cm.
PART DESCRIPTION
Handelbar: Nitto Noodle - 46cm
Stem: Nitto Tech DLX SM112
Brake Levers: Tektro TRP RRL Retro BRL 29 001- 9cm
Shifters: Shimano Dura Ace Bar End - 9 speed
Brakes: Tektro R559
Crank Set: Sugino XD 600 (Triple) 175mm 46x36x26
Wheel Set: 700c Velosity Dyad Rims (36)
Hubs: White M15 (36) w/ DT Competition spokes
Tires: Compass Barlow Pass 700c x 38mm
Front Derailleur: IRD Alpina 28 6mm FD224
Rear Derailleur: Sun XCD Model #(RD1105)
Fenders: P45 Longboards
Casset: Shimano 9 Speed / 11-32
Chain: Sram PC-69 9 speed
Saddle: Brooks B17 Special w/ copper rails
Bar Tape: Brooks perforated HT253
Seat Post: Nitto S-83 ST075
Pedals: Not included

• do NOT contact me with unsolicited services or offers

curbtender

There you go, you're hired!

Rocket-Sauce 

https://boston.craigslist.org/bmw/bi...894476487.html

Road bike: carbon Calfee Tetra Pro w/ HED wheel set - $990 (Needham)

Calfee Tetra Pro carbon fiber frame
HED carbon wheel set (over $2k invested)
Campy build
54 cm
Low miles, meticulously maintained, recent tune up. Ready to ride.
All extras included (aerobars, saddle bag, etc)

• do NOT contact me with unsolicited services or offers

audiomagnate

https://atlanta.craigslist.org/atl/b...892631677.html

GailT

Large Guerciotti with Columbus ELOS tubes, for $100 on craigslist near Denver. I was interested after reading the recent thread on Max and EL-OS tubes, but nice bikes at low prices go quick on Denver CL.

CO_Hoya 

Wow, my size too - I’m on a buying moratorium these days but would have broken it for that one.

Why do I expect that @Brewsmith is currently cleaning the tricolor group for resale?

merziac

That seat could be worth a buck twenty five.

machinist42

1980's Shogun Road Bike - Needs Nothing, Ready to Ride! - $100 (Wilmington)










"Shogun road bike - 1984. Needs nothing! This bike was the high end road bike in the 80's, made in Japan. I just replaced the tires and tubes last month- 700 x 28mm. It's in exceptional condition for it's age as you can see from the pictures, and the paint is still in great shape, with just a few sratches. It comes with Shimano clip pedals and Shimano shoes size 44 (11 1/2 US). I also have regular pedals that come with the bike. It's a XL frame, so it's best for a rider 6' or taller.
The price is $100"

https://wilmington.craigslist.org/bi...895242172.html

(Champion 2 tubing? Shoes too.)

chanontb

I find for buy Soma Ti Journey and Vintage-hon / dahon convertible (orange musgard).

If who found please tell me at jonathanchujung@gmail.com. and I live at South San Francisco, CA.

Very Thanks.
Jonathan

thumpism 

Wrong year, good price.

https://richmond.craigslist.org/bik/...894925447.html

1980 Schwinn voyaguer - $275 (Richmond)

bicycle frame material: steel
bicycle type: road
frame size: 26
wheel size: 26.5 in

Have this old classic bike, don’t ride it anymore and could use a good home