Go Back  Bike Forums > Bike Forums > Classic & Vintage
Reload this Page >

Bianchi classica circa 80s seat post size help

Notices
Classic & Vintage This forum is to discuss the many aspects of classic and vintage bicycles, including musclebikes, lightweights, middleweights, hi-wheelers, bone-shakers, safety bikes and much more.

Bianchi classica circa 80s seat post size help

Old 12-31-09, 09:30 PM
  #1  
Senior Member
Thread Starter
 
Join Date: Nov 2009
Posts: 7,107
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 4 Times in 4 Posts
Bianchi classica circa 80s seat post size help

I bought my girlfriend a late 80s Bianchi Classica and its in dire need of a seat post. its Japanese made and has a decal that says Hi-Mn. i believe its strait guage tubbing but built up with some newer parts it only tips the scales at 21.1lbs.

anyway, the seat post in it measures about 26.4 with my calipers but the stem that came in it was the wrong size, so who knows if this is right. (the binder looks correct) any guesses to what it should have??
thirdgenbird is offline  
Old 12-31-09, 09:36 PM
  #2  
sultan of schwinn
 
EjustE's Avatar
 
Join Date: Sep 2009
Location: Lehigh Valley, PA
Posts: 3,581
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 15 Times in 9 Posts
Bianchigirll is the expert here, but I am willing to venture a guess that a. it is not a straight gauge tubing and more likely a DB Tange 900 main triangle and b. it takes a 26.8 seat post.
EjustE is offline  
Old 12-31-09, 09:47 PM
  #3  
Senior Member
Thread Starter
 
Join Date: Nov 2009
Posts: 7,107
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 4 Times in 4 Posts
Originally Posted by EjustE
Bianchigirll is the expert here, but I am willing to venture a guess that a. it is not a straight gauge tubing and more likely a DB Tange 900 main triangle and b. it takes a 26.8 seat post.
thanks, its a lower end frame (stem shifters) and after looking again it says P.G. OJI Original Tubing. nothing about Tange, nothing about butting. the 26.4 that is in there seems very tight. i hope all is well...
thirdgenbird is offline  
Old 12-31-09, 09:50 PM
  #4  
Senior Member
Thread Starter
 
Join Date: Nov 2009
Posts: 7,107
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 4 Times in 4 Posts
here is more evidence for 26.4

https://www.bikeforums.net/archive/in.../t-178678.html

i jut want to verify before purchase
thirdgenbird is offline  
Old 12-31-09, 09:52 PM
  #5  
sultan of schwinn
 
EjustE's Avatar
 
Join Date: Sep 2009
Location: Lehigh Valley, PA
Posts: 3,581
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 15 Times in 9 Posts
Tight is the way you want to fit a seat post (with a lot of lube on it). On the other hand... does the frame have any down tube shifter bosses? I cannot think of a Bianchi leaving any factory with stem shifters...

Pictures, pretty please
EjustE is offline  
Old 12-31-09, 09:58 PM
  #6  
sultan of schwinn
 
EjustE's Avatar
 
Join Date: Sep 2009
Location: Lehigh Valley, PA
Posts: 3,581
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 15 Times in 9 Posts
Originally Posted by thirdgenbird

i jut want to verify before purchase
I'd stay away unless it is about $50 or so... Still the stem shifters bug me (even that bike you linked to had DT shifter bosses)
EjustE is offline  
Old 12-31-09, 10:22 PM
  #7  
Senior Member
Thread Starter
 
Join Date: Nov 2009
Posts: 7,107
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 4 Times in 4 Posts
i already own the frame. i just want to verify seatpost size before i buy one of those. it has no shifter bosses. i bought it for the brand new bontrager wheelset, saddle, tires, 9spd shimano cassette and platted 9spd chain that came with it.

i know its not a real high end frame but i currently have it built as a 1x9 up with:

kenissis aluminum fork
chorus headset
Giant adjustable quill stem
stock aluminum bars
nashbar brake levers
nashbar front caliper (stock dia comp rear for extra reach)
veloce bottom bracket
campy racing t crank arms
racing t rear derailur
ultegra 9spd cassette
kmc 9spd chain
bontager saddle
mks slyvan light pedals
dura ace bar end shifter (front) friction hooked to rear
and the heavy steel seapost

after all of that it weighs 21lbs

i figure that none of those parts are all that light so the frame cant be too bad quality wise...
thirdgenbird is offline  
Old 12-31-09, 10:37 PM
  #8  
Senior Member
Thread Starter
 
Join Date: Nov 2009
Posts: 7,107
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 4 Times in 4 Posts
i'm ebraised to say what i have invested in the actual bike but there are a lot of BRAND NEW parts:

bottom bracket
pedals
cranks
derailur
cassette
chain
saddle
bar tape
bottle cage
power grips (great for commuting in nice leather shoes)

and these parts are like new:
chain rings
front brake
stem
headset
shifter
brake levers
wheels

total investment is less than $300





thirdgenbird is offline  
Old 01-01-10, 07:42 AM
  #9  
Senior Member
 
Join Date: Nov 2004
Posts: 23,233
Mentioned: 652 Post(s)
Tagged: 1 Thread(s)
Quoted: 4719 Post(s)
Likes: 0
Liked 3,034 Times in 1,874 Posts
Originally Posted by thirdgenbird10211866
I bought my girlfriend a late 80s Bianchi Classica...i believe its strait guage tubbing...anyway, the seat post in it measures about 26.4 with my calipers but the stem that came in it was the wrong size, so who knows if this is right. (the binder looks correct) any guesses to what it should have??
Your Classica is early 1980s. It has the Piaggio decal, indicating it is no newer than 1984, which would be my guess, based on the decals. Please submit the serial number for my database.

The tubing is plain gauge (non-butted) manganese alloy. But this is only in the main tubes, The stays and original fork are hi-tensile steel.

As previously stated, other samples using this tubing have turned up with 26.4mm seat posts. It is certainly in the ballpark for a plain gauge, manganese alloy tubeset and there is no reason not to believe that it is correct.

I think you have done a very nice job in modernizing the Classica. It may be a bit overdressed, but provided the girlfriend likes it, it is well worth the investment.


Originally Posted by EjustE
Tight is the way you want to fit a seat post (with a lot of lube on it)...
Ideally, a seat post should be a line fit, which means the size of the post does not exceed the inner diameter of the seat tube. A tight fit will mar the post during insertion, removal and adjustment, even with lubrication. The post should be the same size as the inner diameter of the seat tube or 0.2mm undersize. A lubricated post should slide easily into the seat tube.
T-Mar is offline  
Old 01-01-10, 08:03 AM
  #10  
Senior Member
Thread Starter
 
Join Date: Nov 2009
Posts: 7,107
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 4 Times in 4 Posts
Thanks!

where is this database???

i agree that it is a tad over dressed. i would like put a simple classic quill stem in it and a silver 32 spoke wheelset but i had this stem laying around and the wheels came attached to the bike. (i basically bought the wheels, chain, cassette, and saddle and the frame came with it.

we wanted to use the stock fork but the original headset was not useable, and the fork required an odd race size. the headset and fork were readily available so we used it.

with all of that said, the girlfriend loves it and it works very nicely.
thirdgenbird is offline  
Old 01-01-10, 08:58 AM
  #11  
Bianchi Goddess
 
Bianchigirll's Avatar
 
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 29,725

Bikes: Too many to list here check my signature.

Mentioned: 191 Post(s)
Tagged: 2 Thread(s)
Quoted: 2912 Post(s)
Liked 2,838 Times in 1,461 Posts
nice looking bike. someone put alot of money onto that old frame. is that an aluminum fork or just an odd crowned steel? I agree on the seat post it likely is 26.4. (if I ever find that seat tube guage, I am going to buy it then rent it out LOL) I see a red Classica in '83 *dark* + '84 *Cardinal* for 300 I don't think you did too bad, I guess the builder did not realize what kind of frame it was.

taking a third look at the pics something about that HS and stemm bother me are the spacers under the stem for looks?

OH "E" yes Bianchis did come with stem shifters. in the early to mid '80 most of the lewer end bikes had them and the Classica was one of them
__________________
One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"

Sugar "Kane" Kowalczyk
Bianchigirll is offline  
Old 01-01-10, 09:06 AM
  #12  
car dodger
 
norskagent's Avatar
 
Join Date: Aug 2005
Location: garner/raleigh nc
Posts: 3,489
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 48 Post(s)
Liked 146 Times in 61 Posts
My ~85 bianchi (italian) track bike takes 26.8. Don't know if that is the spec for their 80s track bikes, italian bikes, or both.
__________________
1989 Schwinn Paramount OS
1980 Mclean/Silk Hope Sport Touring
1983 Bianchi pista
1976 Fuji Feather track
1979 raleigh track
"I've consulted my sources and I'm pretty sure your derailleur does not exist"
norskagent is offline  
Old 01-01-10, 10:00 AM
  #13  
Senior Member
Thread Starter
 
Join Date: Nov 2009
Posts: 7,107
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 4 Times in 4 Posts
Originally Posted by Bianchigirll
nice looking bike. someone put alot of money onto that old frame. is that an aluminum fork or just an odd crowned steel? I agree on the seat post it likely is 26.4. (if I ever find that seat tube guage, I am going to buy it then rent it out LOL) I see a red Classica in '83 *dark* + '84 *Cardinal* for 300 I don't think you did too bad, I guess the builder did not realize what kind of frame it was.

taking a third look at the pics something about that HS and stemm bother me are the spacers under the stem for looks?

OH "E" yes Bianchis did come with stem shifters. in the early to mid '80 most of the lewer end bikes had them and the Classica was one of them
yes, those are spacers under the stem. it was a stock adjustable stem from an original Giant compact road bike. the stem is the proper size, they just used tiny spacers with it apparently to give it a smoother profile. we want a nice quill stem, this was jsut a freebee

it is in fact an aluminum fork. it was also free (just had to pay to get it threaded)
thirdgenbird is offline  
Old 01-01-10, 06:18 PM
  #14  
Senior Member
 
Oldpeddaller's Avatar
 
Join Date: Apr 2008
Location: Maidstone, Kent, England
Posts: 2,637

Bikes: 1970 Holdsworth Mistral, Vitus 979, Colnago Primavera, Corratec Hydracarbon, Massi MegaTeam, 1935 Claud Butler Super Velo, Carrera Virtuoso, Viner, 1953 Claud Butler Silver Jubilee, 1954 Holdsworth Typhoon, 1966 Claud Butler Olympic Road, 1982 Claud

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Liked 11 Times in 10 Posts
Looks good - nice to see an old frame put back into use. Seems pretty light too, how does it ride?
Oldpeddaller is offline  
Old 01-01-10, 07:24 PM
  #15  
Senior Member
Thread Starter
 
Join Date: Nov 2009
Posts: 7,107
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 4 Times in 4 Posts
Originally Posted by Oldpeddaller
Looks good - nice to see an old frame put back into use. Seems pretty light too, how does it ride?
we've got ice and sub zero temps... i cant wait to find out.
thirdgenbird is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Summusen
Classic & Vintage
2
01-29-18 08:58 PM
icepick_trotsky
Classic & Vintage
2
01-22-18 03:08 PM
bigshape
Classic & Vintage
11
04-08-15 12:17 AM
cyclist2000
Road Cycling
1
11-07-10 09:54 PM
biaddiction
Classic & Vintage
7
08-04-10 10:06 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.