SirMike1983 

I think that hub is later than 1936. There's an earlier version with no date and "Patent Pending" on it. Once the patent was awarded, it went to "Patent". But it still looks like a pre-WWII bike to me. I'd guess 1938-40 period based on the no date code hub with "Patent". It's a great find and a good project to have. It should make a good rider.

BigChief 

That's the most interesting Raleigh I've seen in a while. This is pre-hockey stick and models without chaincases had bare chainrings. I have to find my backup files with catalogs and load em into this new computer. I don't remember when the hockey sticks started. Post war I think. Anyway...I'm done with projects and I have a pre-war Raleigh stem in good condition.

nlerner

Thanks, BC! I have this stem in my bin that came off a ‘37 Sports that had spent many decades in someone’s back yard:



Could be a good candidate for one of those DIY plating kits once I sand off all the corrosion?

To complicate matters, I asked a knowledgeable friend about the rear hub, and he’s fairly convinced that it’s from 1946. Hmm. Here's the Sports page from the 1947-48 Raleigh UK catalog. Lots of hits, except for wheel size: Mine has EA3 or 26 1 3/8" Dunlop rims (and stainless spokes), not EA1 or 26 x 1 1/4".

BigChief 

Got my catalogs back! Seems like the modern deep mudguards didn't appear until the 1940 catalog. Odd that the ladies light roadster came with the chainguard but the gents didn't.

So for 1940 it would have had the stem mounted lamp bracket. Here's what I have in my box of goodies.

markk900

To protect the skirts!

SirMike1983 

1946 for the hub is certainly also possible, but with a 46 bike, I would expect some blackout type parts too. I have found most of the no date hubs that I have come across to be right before and right after WW2.

BigChief 

I should have mentioned since the catalog image is so small here...The 1940 catalog lists 1 3/8" tires for the Light Roadster.

thumpism

SIXTY DOLLARS FOR BOTH in NJ!!!

https://www.facebook.com/marketplace...49072546754940

cudak888 

451 rims and a non-folding frame? Were these features ever offered outside the UK market on the Twenty? Don't recall offhand.

-Kurt

Vintage Schwinn

Here is an interesting old 3 speed for $40 in Athens GA (where Univ of Georgia is located)
It is one of those late sixties/very early seventies models with the large center stick shift.... that proved to be somewhat potentially dangerous in accidents and the consumer products safety council campaigned to educate the public and pressure the bike manufacturers to eliminate such shifters.
It appears that the seller believes it may be an AMF (but it clearly is appears badged as AMC Flash), but the cottered 3 piece crank may be indicative that it is probably not of AMF manufacture, and probably was made by some other maker and specifically model named for some once existing retail chain.

https://athensga.craigslist.org/bik/...432573282.html

gster

I've seen a similar stem on an old Iver Johnson track bike.
A very nice option.

I can imagine that back then, a team might have a couple of bikes and several riders that could adjust the stem to suit.

27inch

I remember those very bikes, they had them at the old Kress store where I grew up in the late 60's and early 70's. I remember getting thrown out of the store after riding one around the store and down a flight of steps to the basement level.
The branding AMC Flash is old, I've had balloon tire bikes (built by Schwinn), that had the same brand.
The three speeds with the pointed chainguard and Shimano 333 set up were Japan,Taiwan, or Hong Kong built bikes.

nlerner

Here’s an update on my 1940 (most likely) Sports Light Roadster project. A pic from when I first brought it home:


And after cleaning and polishing:












The bars are alloy from V-O and the GB stem is likely a placeholder. I also have new Schwalbe tires on order as you can see that front tire that I had in the bin is too narrow. Haven’t taken it for a test ride yet as I did something wacky with the brake reassembly and now they don’t work very well! I’ll figure that out.

BFisher 

@nlerner, impressive shine on that for its age. Looks great.

clubman 

There's the reason those guys dipped their hands in plating and paint vats in Nottingham in that corporate film.

It's a beauty bike.

Ged117 

There is something special about a '40s or '50s Raleigh in black enamel. When these earlier bicycles pop up, I still get the three-speed warm glow that Sixty-Fiver wrote about.

ascherer 

Quadrant shifters make me swoon.

nlerner

Thanks, all. This bike was clearly put away in dry storage for 60+ years. Barely any corrosion on the bright parts and just a bit of scraping on the main triangle. Interestingly, no evidence of ever having been fitted with a kickstand! Woohoo!

This is likely the third bike I've setup with a quadrant shifter, and they work really, really well. Less fussy than trigger shifters on the bars.

dirtman

I found this light on a ladies Sprite I had bought last summer, it had a pair of old dead red Panasonic batteries in it and a bulb that looked good but wouldn't light.
It uses a threaded base type flashlight bulb.
I dug around in a drawer and found a 2.4v rated bulb that would fit but it wasn't very bright. I took the whole thing apart, cleaned up the inside and the switch contacts, then I took a single square LED element out of one of those freebie flashlights from Harbor Freight. I took the original threaded bulb that wouldn't work, heated up the base and unsoldered the original filament wires, and heated it up enough to separate the tiny glass globe. I then added a single resistor figured for 2.5v, and reassembled it all into the original bulb assembly.
It will light at 2.2v and above, with a likely max of about 9v. Its powered with two D batteries in the pic but I'll probably make up a 7,4v Li-Ion battery pack for it using either a cell phone battery or a combo of 18500 batteries.
On the two alkaline D batteries, which weren't new, its now been lit as you see it for 11 hours straight, so charge life on better batteries will likely be far greater.
Not sure why I messed with it, I'll likely never use it but it seemed a waste to have it and it not being in working order. Besides, the life span of the batteries with an incandescent bulb was likely a couple hours at best at far less brightness.
I may try making a brighter bulb option with the other bulb I've got, or maybe using an automotive fog light LED bulb with a higher voltage battery pack to get better projection overall.







Its not as good as a modern LED light you can buy today but its far better then it was when new and it still looks like it belongs on an old bike.
If the bike had a Dynohub, I could easily set it up to charge off the hub, but for now, its battery only.

SirMike1983 

The rear dropouts looks kind of different from the usual style as well.

nlerner

I wondered about that, too, though they look the same as the '37 Sports I have. I'll try to take some pics of various old Raleighs I have around to do some comparison.

SirMike1983 

Not to distract from the nice old Boston Sports above, but has anyone done a direct comparison of Panaracer Col de La Vie, Michelin World Tour, and Schwalbe Delta Cruiser tires?

I have a Sports with an older pair of Panaracers on it. They're not in bad shape and they ride pretty well. The only thing I don't like is that they totally max out my fender space and I have very little room for tolerance or error in set up. This is a 70s bike so gum/tanwall is the way to go. I'm contemplating a swap to Michelin when the time comes.

I have a late 50s Sports that I put the white wall Delta Cruisers on. They're a huge improvement over the Duro tires I formerly had, though at the time I could not get Michelin World Tour white walls. Thoughts on the Schwalbe vs Michelin?

Salubrious

I advise taking the brakes apart as an exercise to see how they work. Raleigh brakes are denigrated a lot but if you figure out how they work they are very easy to adjust, one of the better side pull designs out there (I hate that bit where they want to drag on one side of the rim and these are the best brakes at having no worries with that). Here are a few tips:
1) if you can take the brake line out of the sleeve and run WD 40 through the sleeve and chase it with spray lithium grease. Clean the line as best you can and apply a bit of automotive wheel bearing grease to it as a bit of a sheen.
2) Grease the round brake cable fitting in the brake lever! Pay annual attention to this- if the grease gets washed out it can lead to cable failure.
3) adjust the brake travel so the pads are well away from the rim at rest. In this way when you grab the lever it will have some travel before the brakes engage. You'll find that you have far more powerful braking action in this manner, not the least of which is your grip will be more powerful too. Operating the brakes should have a smooth, almost addicting feel.
4) Kool Stop makes pads that slide directly into any shoe holder that has John Bull pads. They even have them in black.
5) do a proper wheel alignment. You'll want to this anyway because old spokes have stretched!

If you get all this right the bike will stop quite well even in the rain.
The Michelin is probably the fastest tire. The Panaracers have the best ride IME/IMO. The Schwalbe looks the best (IMO, if you have the white ones) and sits between the two. A lot depends on tire pressure; you probably know to run your front tire a bit lower than the rear. I'm a bit heavier so I tend to run the rear tire just below recommended maximum and the front about 20% lower. The ride of the Panaracers is addicting, but IME they are more likely to puncture or else I've just had bad luck.

nlerner

Thanks for those tips! Front and back actually have different issues (though I didn't pay attention to their reach when I removed them for cleaning; I guess that rear has the longer reach and my original pic confirms): Rear binds up. I've lubricated the brake bolt and played around with the tension between tightening/loosening the brake bolt and tightening/loosening the brake bolt nut, but something still isn't right. It's possible I reversed front and rear springs, but they seem to be sitting in the right spots. The front springs open and closed just fine, but now the pads are too close to the rim! It's possible I switched front and rear pad when reassembling, but they look equally worn to me (which is actually not worn at all). That's an odd one. I'm assuming the calipers just aren't opening as wide as they should.

When new tires arrive and I have a reason to pull the wheels, I'll also pull both brakes and see if I can figure out what's going on. Advice always appreciated!

gster

Very impressive/quick turnaround on this one.
It cleaned up real good!