gster

Black Bomber

bluesteak 

I have been using snow seal with good effect for years.

blackbomber

YES! A ‘67 K0 (year judged by seat). I had a ‘65, which was stolen. Most memorable vehicle I’ve owned. Had it in my 20’s. Good times.

Im enjoying my Dunelt a lot now, though :-)

clubman 

I have a smaller one, a '66 CB160.

Ballenxj

WOW! These bikes bring back memories.

gster

I really like the mid/late 60's Hondas with the reversed tanks.
I sold my 67 305 Superhawk last year.

Salubrious

Once you get good at shifting it and if the shift cable is set properly its all good.

But make sure the hub is properly rebuilt! The biggest problem I've run into is first gear slipping a cog which is a very uncomfortable feeling when climbing. I've got a different bike ('51 Humber) in which this is no problem at all.

Ged117 

What would cause that? I've recently done a 75 percent rebuild on my '53 FW. Bearing races and all internal parts were in great condition, very little wear. Are there parts that I should replace anyway prior to long-term use? It has new bearings now, and was cleaned out; repacked etc.

jackbombay

Are you talking about hitting "neutral"?

BigChief 

Yup, lots of memories. My friend had a Superhawk. First time I ever saw an electric starter on a motorcycle. Pretty exotic back then.

Salubrious

I'm thinking gear faces are worn. I'm taking it apart this winter.

No. This is climbing hard in low, while holding the shifter in low as well to prevent it from dropping into 2nd (what most people call 1st on a 3-speed). 'Neutral' is between 3rd and high. Regardless if I keep my hand on the shifter or not, it will occasionally pop and slip; very unsettling as you know its not good for the teeth of the gears involved. I've got two 4-speeds that do this and one that is great.

Ged117 

Stumbled across this for sale. Seller says 1958. The SA window shifter is clearly visible mounted in the wrong spot. This looks to be a 1950s CCM "Club Bike". I like the colour very much. Would this bike have 26 x 1 1/4 wheels? How do they ride? I'm not sure if that is a Brooks saddle or some local 1950s Canadian alternative.

clubman 

Nice Club Racer in an unusual blue. Looks nice and clean. Yes to the EA1 wheel set. I can't remember what saddle was stock but at least it's not a Dunlop.
The ride is just average, typical of CCM, but hey you'll look good! Quality tires are pretty much gone from the market. I'd swear my 51 had the same original rubber as yours. Perhaps Barron Swallows?

51 CCM's

blackbomber

Very nice! I had one of those as well. If I was in the position to get another bike today, I’d likely choose the 160 over the 450. A good part of that is due to the fact that 450 K0-K1 prices are out of my reach. But also the 160 is all I need. And none of the worries with the torsion bar valvetrain. I like the flat bars and Euro mirrors on yours.

blackbomber

Since I’m now permitted to include pics (newbie), I’ll post one of mine. 1972 Dunelt:

paulb_in_bkln

I would most likely have to buy an FW in used, unknown condition, and this is not giving me confidence.

BigChief 

Beautiful! Love the color. I wouldn't be able to resist buying a new Brooks leather saddle for a bike this pretty. My eye wants to see a B 67. Dark brown

gster

Interesting bike.
The only tires I've found to fit are Kenda 023 from Amazon.ca
Link;
https://www.amazon.ca/gp/product/B00...?ie=UTF8&psc=1

gster

Ride a Wheel on Sheffield Steel!

thumpism

Not mine.

https://washingtondc.craigslist.org/...018268626.html

Vintage Sturmey Archer 3-speed 26" wheels - $30 (W Springfield)

condition: excellent
make / manufacturer: Sturmey Archer AW
model name / number: 3 Speed
size / dimensions: 26"
I have three Vintage (1970's) 3 speed wheels 26" (takes 26" x 1-3/8" tires) with Sturmey Archer AW 3 speed hubs. $30/each or best offer! Wheels are pretty clean on the rims but do have some rust on the interior of the rims. Great replacements.

gster

The British Motorcycle industry and and their bicycle industry followed a similar downward spiral.
The 1966 Honda 450 started it.
Although small by today's standards, the Black Bomber was Japan's first "big bike".
The British and American manufacturers saw it as a bit of a joke.
Despite dominating the market, their products were old designs, built in old factories on old
worn out machines.
The Japanese bikes did three amazing things:
-They started
-They didn't break down
-They didn't leak oil.
Management, like Raleigh didn't see the future coming and were slow to react.
1968 saw the debut of the Honda 750 and the rest is history.
I have many great memories of my 1969 BSA 650 (still have it)
British motorbikes are a great form of exercise.
You can build up a real sweat pushing it home.......

clubman 

And they could rev up to 10,000 rpm without blowing up. Nothing the Brits made could do that.

Ged117 

The bike is too small for me, so I think I'll pass. It is for sale in the Ottawa - Montreal region for those interested. I think I'll be holding out for an interesting higher-end frame in my size 60-62cm, should one come my way, for the next bike. My high tensile Peugeot has a nice ride for its original place in the lineup, and is a good commuter. It is cool to see a 1950s CCM though. The higher spec model description in your catalogue mentions "alloy steel" frame. I bet those are hard to come by.



I bought mine like that. Once it is built into a wheel, I want to see how it will work. It has already had a 3/4 rebuild, but if it rides just fine, I will wait until it doesn't to take it apart again. FWs are supposed to be a little more touchy, but I read on the gentleman's cycle group that a higher quality shifter cable can help with low gear on four-speed hubs to hold things. Mark at Bikesmith sells higher end stainless shifter cables with a bronze cable stop brazed onto the end, and he recommends it for FW hubs for smooth action. I ordered two since I figured I'll be using this hub for years to come and the price was good. It seemed like a good idea and I was already ordering cotter pins for the '56 Sports and '72 Sports.

If the frame was bigger I might have persuaded myself, especially for the colour and complete SA hub and window shifter.

blackbomber

Thanks - the color was a big draw for me, too. My previous 3spd lightweight was a '68 Schwinn Speedster in Sky Blue, which I really liked. The previous owner of the Dunelt (who gets credit for the refurb) indeed had a brown, Brooks-esque saddle and color matching grips prior to my acquisition. I like it better that way as well. Maybe next season.

Are you a Bike Karma podcast listener? Because I read that comment in a Sean Connery accent :-)
https://podtail.com/en/podcast/the-b...rk-bici-co-bi/
​​​​​​​

Anyway, here's a shot the PO sent me.

gster

Very interesting...
I like the sweep on the handle bars.
I wonder if these were actually made in Canada or assembled
from British parts shipped over.....
The BB and cranks are British style, CCM generally had a one piece crank.
My Mystery Canadian Cub Bike has similar lugs...


.EA1 rims were made in Canada.