Show us your Raleigh Super Course!
#1227
Senior Member
Join Date: Apr 2007
Posts: 6,529
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 996 Post(s)
Liked 1,017 Times
in
658 Posts
I'm wondering if someone can date a Supercourse MKII I owned back in the 80s and 90s. It's the bike I wish I'd never sold, but at the time I thought that a person should only own one road bike.
Anyway, I bought it used but pristine in the spring of 1978 for IIRC $125 right after my brand new Windsor Carrera had been stolen off my back porch. Given it was used, but near-mint in 1978, I'm thinking it was a '75-'77 vintage. It was red and had the sort of graphics in mississippimud's post :
https://www.bikeforums.net/classic-vi...course-38.html
The unusual features that I have not seen mention of (I haven't read all 50 pages of the thread though!) are: it had a leather Ideale saddle and a steel cotterless crank. Other than that it had the sort of features I see on many Supercourses of that era - namely Simplex derailleurs, stamped (not forged) dropouts, etc.
I've (rarely) seen the steel cotterless crank in some photos, but not in conjunction with Simplex derailleurs. I don't think I've ever seen a SC photo with an Ideale saddle, nor have I seen mention of Ideale - it's always Brooks. I guess there's a chance that the guy I bought it from swapped the saddle, but I doubt it.
Anyway, an original-ish Supercourse of the same era as my old one is something I's snap up in a minute should I find one at a decent price in excellent condition.
Anyway, I bought it used but pristine in the spring of 1978 for IIRC $125 right after my brand new Windsor Carrera had been stolen off my back porch. Given it was used, but near-mint in 1978, I'm thinking it was a '75-'77 vintage. It was red and had the sort of graphics in mississippimud's post :
https://www.bikeforums.net/classic-vi...course-38.html
The unusual features that I have not seen mention of (I haven't read all 50 pages of the thread though!) are: it had a leather Ideale saddle and a steel cotterless crank. Other than that it had the sort of features I see on many Supercourses of that era - namely Simplex derailleurs, stamped (not forged) dropouts, etc.
I've (rarely) seen the steel cotterless crank in some photos, but not in conjunction with Simplex derailleurs. I don't think I've ever seen a SC photo with an Ideale saddle, nor have I seen mention of Ideale - it's always Brooks. I guess there's a chance that the guy I bought it from swapped the saddle, but I doubt it.
Anyway, an original-ish Supercourse of the same era as my old one is something I's snap up in a minute should I find one at a decent price in excellent condition.
#1228
Senior Member
Join Date: Dec 2005
Posts: 16,938
Mentioned: 469 Post(s)
Tagged: 0 Thread(s)
Quoted: 3695 Post(s)
Liked 6,135 Times
in
2,447 Posts
I'm wondering if someone can date a Supercourse MKII I owned back in the 80s and 90s. It's the bike I wish I'd never sold, but at the time I thought that a person should only own one road bike.
Anyway, I bought it used but pristine in the spring of 1978 for IIRC $125 right after my brand new Windsor Carrera had been stolen off my back porch. Given it was used, but near-mint in 1978, I'm thinking it was a '75-'77 vintage. .
Anyway, I bought it used but pristine in the spring of 1978 for IIRC $125 right after my brand new Windsor Carrera had been stolen off my back porch. Given it was used, but near-mint in 1978, I'm thinking it was a '75-'77 vintage. .


Ideale saddle wouldn't have been original though perhaps swapped in at the bike shop at point of sale. I've seen that steel Nervar cotterless cranks on some '74 models.
#1229
Member
Join Date: Dec 2016
Location: New Mexico
Posts: 47
Bikes: Fausto Coppi, Specialized Transition, Specialized Roll
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 8 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Did you date the bike by serial# yet?
WC4000473 is stamped on the bottom bracket, so it's a 1974, I believe
WC4000473 is stamped on the bottom bracket, so it's a 1974, I believe
#1230
Junior Member
Join Date: Jan 2017
Location: Arizona
Posts: 7
Bikes: 1975 Raleigh Carlton Super Course Mixte
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
1975 Raleigh Super Course MK II Mixte
Found this little lady on Craigslist, she had been sitting in a garage since the 80s. Didn't have to do much: a top to bottom cleaning, VO bars, bar end brake levers, and a Brooks saddle. She is my baby

Last edited by WxMixte; 04-11-17 at 10:54 AM.
#1231
Sempiternal Newb
Join Date: Dec 2014
Location: Panama City, FL
Posts: 656
Bikes: '92 Trek 750, '85 Univega Gran Turismo, '95 Stumpjumper,
Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 231 Post(s)
Likes: 0
Liked 15 Times
in
11 Posts
I picked up this mkII as an unfinished project from a friend and used it as an excuse to try out the Swift Tire Sand Canyons. It's a winning combination. I finished the build with Suntour shifty bits and VO bars.

More photos in a Flickr album

More photos in a Flickr album
#1232
Senior Member
Such a cheery colour green. Perfect for early spring ride around. How does it handle with the VO bars? Can't go wrong with Suntour shiny bits as well.
Well done!
Well done!
#1233
Senior Member
Fog has lifted as to how to post pics. Behold my 84 Raleigh USA. Spent way too much time trying to get around the strange shifter bosses so bypassed them. Went with the barcons, should have done it long ago.
The ride is exciting and sure. A real treat!
The ride is exciting and sure. A real treat!
#1234
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,420
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 503 Post(s)
Tagged: 0 Thread(s)
Quoted: 7138 Post(s)
Liked 2,086 Times
in
1,240 Posts
I rode my Super Course twice on Monday. First was with my wife on roads, to get some groceries. Second was on a gravel road and a rough trail in Lake Minnewaska State Park Preserve in New York State. I'm planning a renovation of the bike just for fun, because it already rides beautifully.
Here is the bike before and during the gravel ride.

Here is the bike before and during the gravel ride.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#1235
Sempiternal Newb
Join Date: Dec 2014
Location: Panama City, FL
Posts: 656
Bikes: '92 Trek 750, '85 Univega Gran Turismo, '95 Stumpjumper,
Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 231 Post(s)
Likes: 0
Liked 15 Times
in
11 Posts
The handling is pretty quick and has a slight tendency to oversteer. It responds really well to aggressive leaning through corners, though, which is a lot of fun.
#1236
Senior Member
Join Date: Apr 2017
Location: Los Angeles, CA
Posts: 2,257
Bikes: 1964 Legnano Roma Olympiade, 1973 Raleigh Super Course, 1978 Raleigh Super Course, 1978 Peugeot PR10, 2002 Specialized Allez, 2007 Specialized Roubaix, 2013 Culprit Croz Blade
Mentioned: 68 Post(s)
Tagged: 0 Thread(s)
Quoted: 741 Post(s)
Liked 816 Times
in
420 Posts
I just finished my "alley find" 1973 SC. Too new to post pics yet, me, not the bike, so I'll get back to you all. Great ride! So glad I took the time to rescue it.
#1237
Senior Member
Join Date: Sep 2013
Location: Chicago
Posts: 1,591
Bikes: '72 Peugeot PX-10 '78 Motobecane Le Champion '83 Motobecane Grand Jubile '85 Trek 830 '88 Merckx Team ADR Corsa Extra
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 452 Post(s)
Liked 1,109 Times
in
609 Posts
Caught in the wild, quick and dirty, on the train back from riding the Prairie Path/Great Western/Fox River Trail today. Super Course did great on all that crushed limestone. It's wearing a coat of limestone dust, all over too. Those Gravel Kings are perfect for that kind of riding. It was a good day.
#1239
Senior Member
Join Date: Nov 2016
Location: Detroit, Michigan
Posts: 77
Bikes: '16 Fuji Tread 1.7, '96 Cannondale R400, '88 Miyata 112
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 29 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Last month, I picked up this 1984 Super Course. It was already in great shape, but I'll continue polishing a few things and touching up paint. I've replaced the saddle and threw some new tape on it. Soon, I'll replace brake cables and the handlebar tape will match the Brooks saddle.

Last edited by IMontoya; 04-23-17 at 09:18 AM.
#1240
Senior Member
Join Date: Apr 2017
Location: Los Angeles, CA
Posts: 2,257
Bikes: 1964 Legnano Roma Olympiade, 1973 Raleigh Super Course, 1978 Raleigh Super Course, 1978 Peugeot PR10, 2002 Specialized Allez, 2007 Specialized Roubaix, 2013 Culprit Croz Blade
Mentioned: 68 Post(s)
Tagged: 0 Thread(s)
Quoted: 741 Post(s)
Liked 816 Times
in
420 Posts
I've been a lurker on Bikeforums for awhile, and learned a lot, and thought it was finally time to share my Raleigh Super Course story. This is a bit of a repeat from the "Found in Dump thread, but more detail.)
One thing I hate to see is a neglected, unloved bike tossed on the trash heap. Back in June 2016, my brother-in-law, Craig was riding down a back alley near our house and found a guy tossing several bikes in the trash. He came back with his car and verified that the guy was indeed trashing the old bikes. In the pile, he found an old lightweight steel road frame with beautiful lugs. After some research we determined that it was a 1973 Raleigh Super Course frame. The special Italian Capella lugs were only used for two years of production.
I decided to attempt my first restoration project. The first problem was the aluminum seat post bonded to the steel frame through years of galvanic corrosion. I tried several methods to loosen it, and almost gave up on it. Finally, I pulled the bottom bracket and crank and filled the seat tube with penetrating oil, and let it soak for several days. On the third day, it started to loosen, and I was able to get it out. As I began stripping the ugly pea green spray paint, I found chromed rear drop outs, which were in amazing shape. The frame was straight, but I did see cracks at the junction of the seat tube and seat stays, on both sides. I finished stripping the paint, and had the damaged frame re-brazed at a local welding shop.
Before committing to paint, I decided to do a "rat rod" build up and see how it was to ride. The fit was perfect for me, and I really enjoyed the smooth responsive ride that only old school steel can provide. Last year I rode my mostly original 1964 Legnano on the Eroica California ride, and was let down by the old school gearing. I ended up walking several hills. The plan was to build the Raleigh as a more hill friendly Eroica bike. I kept the "as found" Sugino AT triple crank, and added new mountain bike chain rings (50,40,32). Moorpark Riders friend Dave Bobert provided a nice set of Campy 700c wheels, to which I added a modern Shimano 34 tooth Megarange six speed freewheel, along with suitable Suntour VGT Luxe rear and Cyclone II front derailleurs and Suntour bar end shifters. The parts were found mostly on Ebay, a few at local swap meets and at Atomic Cycles in Van Nuys, a great source for low cost vintage parts. The drive train is mostly period correct, just not original to the bike. Since all I had was a bare frame, I decided to have a little fun with it, and to put intended function over mechanical originality.
On a Pasadena vintage group ride, I met Evan Whitener, owner The Bicycle Stand in Long Beach. Evan was recommended as a frame restoration expert. The frame needed more than paint. I decided to add water bottle cage mounts, and replace the brazed on cable guides the previous owner had removed. I chose a modern Toyota Spruce Mica paint color, a little darker than the original Raleigh green, more like a British Racing Green, with little gold flakes for highlight, and reproduction decals from Velocals.
After several weeks, the frame was returned painted, decaled and clear coated. I carefully re-assembled it, and really enjoy riding my resurrection project. When next year's Eroica rolls around, the bike is ready, I only hope that I am too. My longest ride on the SC was 45 miles yesterday from Ventura Mission to Summerland, with a couple of inland hills along the way. It's a sweet ride and I'm so glad I was able to rescue it from the trash heap.
One thing I hate to see is a neglected, unloved bike tossed on the trash heap. Back in June 2016, my brother-in-law, Craig was riding down a back alley near our house and found a guy tossing several bikes in the trash. He came back with his car and verified that the guy was indeed trashing the old bikes. In the pile, he found an old lightweight steel road frame with beautiful lugs. After some research we determined that it was a 1973 Raleigh Super Course frame. The special Italian Capella lugs were only used for two years of production.
I decided to attempt my first restoration project. The first problem was the aluminum seat post bonded to the steel frame through years of galvanic corrosion. I tried several methods to loosen it, and almost gave up on it. Finally, I pulled the bottom bracket and crank and filled the seat tube with penetrating oil, and let it soak for several days. On the third day, it started to loosen, and I was able to get it out. As I began stripping the ugly pea green spray paint, I found chromed rear drop outs, which were in amazing shape. The frame was straight, but I did see cracks at the junction of the seat tube and seat stays, on both sides. I finished stripping the paint, and had the damaged frame re-brazed at a local welding shop.
Before committing to paint, I decided to do a "rat rod" build up and see how it was to ride. The fit was perfect for me, and I really enjoyed the smooth responsive ride that only old school steel can provide. Last year I rode my mostly original 1964 Legnano on the Eroica California ride, and was let down by the old school gearing. I ended up walking several hills. The plan was to build the Raleigh as a more hill friendly Eroica bike. I kept the "as found" Sugino AT triple crank, and added new mountain bike chain rings (50,40,32). Moorpark Riders friend Dave Bobert provided a nice set of Campy 700c wheels, to which I added a modern Shimano 34 tooth Megarange six speed freewheel, along with suitable Suntour VGT Luxe rear and Cyclone II front derailleurs and Suntour bar end shifters. The parts were found mostly on Ebay, a few at local swap meets and at Atomic Cycles in Van Nuys, a great source for low cost vintage parts. The drive train is mostly period correct, just not original to the bike. Since all I had was a bare frame, I decided to have a little fun with it, and to put intended function over mechanical originality.
On a Pasadena vintage group ride, I met Evan Whitener, owner The Bicycle Stand in Long Beach. Evan was recommended as a frame restoration expert. The frame needed more than paint. I decided to add water bottle cage mounts, and replace the brazed on cable guides the previous owner had removed. I chose a modern Toyota Spruce Mica paint color, a little darker than the original Raleigh green, more like a British Racing Green, with little gold flakes for highlight, and reproduction decals from Velocals.
After several weeks, the frame was returned painted, decaled and clear coated. I carefully re-assembled it, and really enjoy riding my resurrection project. When next year's Eroica rolls around, the bike is ready, I only hope that I am too. My longest ride on the SC was 45 miles yesterday from Ventura Mission to Summerland, with a couple of inland hills along the way. It's a sweet ride and I'm so glad I was able to rescue it from the trash heap.
Last edited by Slightspeed; 05-03-17 at 06:35 PM.
#1241
Senior Member
Join Date: Sep 2011
Location: Baltimore MD
Posts: 3,940
Bikes: '72 Motobecane Grand Record, '72 Gitane tandem, '72 Raleigh Super Course, '73 Raleigh Gran Sport, '73 Colnago Super, '76 Fiorelli Coppi, '78 Raleigh SBDU Team Pro, '78 Trek 930, '81 Holdsworth Special 650B, '86 Masi GC, ’94 Bridgestone RB-T
Mentioned: 67 Post(s)
Tagged: 0 Thread(s)
Quoted: 771 Post(s)
Liked 487 Times
in
263 Posts
Here's my '72. Currently set up as a townie bike.





__________________
The man who dies with the most toys…is dead. - Rootboy
The man who dies with the most toys…is dead. - Rootboy
#1242
Junior Member
Join Date: Sep 2014
Posts: 5
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I have what I believe is an '84 that is this bike's twin! except it has different stock wheels.. I put the same seat and wraps on.... used brown electrical tape on the wraps...
Last edited by Ed Garner; 05-07-17 at 08:49 PM.
#1243
Senior Member
#1244
Senior Member
I've been a lurker on Bikeforums for awhile, and learned a lot, and thought it was finally time to share my Raleigh Super Course story. This is a bit of a repeat from the "Found in Dump thread, but more detail.)
One thing I hate to see is a neglected, unloved bike tossed on the trash heap. Back in June 2016, my brother-in-law, Craig was riding down a back alley near our house and found a guy tossing several bikes in the trash. He came back with his car and verified that the guy was indeed trashing the old bikes. In the pile, he found an old lightweight steel road frame with beautiful lugs. After some research we determined that it was a 1973 Raleigh Super Course frame. The special Italian Capella lugs were only used for two years of production.
I decided to attempt my first restoration project. The first problem was the aluminum seat post bonded to the steel frame through years of galvanic corrosion. I tried several methods to loosen it, and almost gave up on it. Finally, I pulled the bottom bracket and crank and filled the seat tube with penetrating oil, and let it soak for several days. On the third day, it started to loosen, and I was able to get it out. As I began stripping the ugly pea green spray paint, I found chromed rear drop outs, which were in amazing shape. The frame was straight, but I did see cracks at the junction of the seat tube and seat stays, on both sides. I finished stripping the paint, and had the damaged frame re-brazed at a local welding shop.
Before committing to paint, I decided to do a "rat rod" build up and see how it was to ride. The fit was perfect for me, and I really enjoyed the smooth responsive ride that only old school steel can provide. Last year I rode my mostly original 1964 Legnano on the Eroica California ride, and was let down by the old school gearing. I ended up walking several hills. The plan was to build the Raleigh as a more hill friendly Eroica bike. I kept the "as found" Sugino AT triple crank, and added new mountain bike chain rings (50,40,32). Moorpark Riders friend Dave Bobert provided a nice set of Campy 700c wheels, to which I added a modern Shimano 34 tooth Megarange six speed freewheel, along with suitable Suntour VGT Luxe rear and Cyclone II front derailleurs and Suntour bar end shifters. The parts were found mostly on Ebay, a few at local swap meets and at Atomic Cycles in Van Nuys, a great source for low cost vintage parts. The drive train is mostly period correct, just not original to the bike. Since all I had was a bare frame, I decided to have a little fun with it, and to put intended function over mechanical originality.
On a Pasadena vintage group ride, I met Evan Whitener, owner The Bicycle Stand in Long Beach. Evan was recommended as a frame restoration expert. The frame needed more than paint. I decided to add water bottle cage mounts, and replace the brazed on cable guides the previous owner had removed. I chose a modern Toyota Spruce Mica paint color, a little darker than the original Raleigh green, more like a British Racing Green, with little gold flakes for highlight, and reproduction decals from Velocals.
After several weeks, the frame was returned painted, decaled and clear coated. I carefully re-assembled it, and really enjoy riding my resurrection project. When next year's Eroica rolls around, the bike is ready, I only hope that I am too. My longest ride on the SC was 45 miles yesterday from Ventura Mission to Summerland, with a couple of inland hills along the way. It's a sweet ride and I'm so glad I was able to rescue it from the trash heap.
One thing I hate to see is a neglected, unloved bike tossed on the trash heap. Back in June 2016, my brother-in-law, Craig was riding down a back alley near our house and found a guy tossing several bikes in the trash. He came back with his car and verified that the guy was indeed trashing the old bikes. In the pile, he found an old lightweight steel road frame with beautiful lugs. After some research we determined that it was a 1973 Raleigh Super Course frame. The special Italian Capella lugs were only used for two years of production.
I decided to attempt my first restoration project. The first problem was the aluminum seat post bonded to the steel frame through years of galvanic corrosion. I tried several methods to loosen it, and almost gave up on it. Finally, I pulled the bottom bracket and crank and filled the seat tube with penetrating oil, and let it soak for several days. On the third day, it started to loosen, and I was able to get it out. As I began stripping the ugly pea green spray paint, I found chromed rear drop outs, which were in amazing shape. The frame was straight, but I did see cracks at the junction of the seat tube and seat stays, on both sides. I finished stripping the paint, and had the damaged frame re-brazed at a local welding shop.
Before committing to paint, I decided to do a "rat rod" build up and see how it was to ride. The fit was perfect for me, and I really enjoyed the smooth responsive ride that only old school steel can provide. Last year I rode my mostly original 1964 Legnano on the Eroica California ride, and was let down by the old school gearing. I ended up walking several hills. The plan was to build the Raleigh as a more hill friendly Eroica bike. I kept the "as found" Sugino AT triple crank, and added new mountain bike chain rings (50,40,32). Moorpark Riders friend Dave Bobert provided a nice set of Campy 700c wheels, to which I added a modern Shimano 34 tooth Megarange six speed freewheel, along with suitable Suntour VGT Luxe rear and Cyclone II front derailleurs and Suntour bar end shifters. The parts were found mostly on Ebay, a few at local swap meets and at Atomic Cycles in Van Nuys, a great source for low cost vintage parts. The drive train is mostly period correct, just not original to the bike. Since all I had was a bare frame, I decided to have a little fun with it, and to put intended function over mechanical originality.
On a Pasadena vintage group ride, I met Evan Whitener, owner The Bicycle Stand in Long Beach. Evan was recommended as a frame restoration expert. The frame needed more than paint. I decided to add water bottle cage mounts, and replace the brazed on cable guides the previous owner had removed. I chose a modern Toyota Spruce Mica paint color, a little darker than the original Raleigh green, more like a British Racing Green, with little gold flakes for highlight, and reproduction decals from Velocals.
After several weeks, the frame was returned painted, decaled and clear coated. I carefully re-assembled it, and really enjoy riding my resurrection project. When next year's Eroica rolls around, the bike is ready, I only hope that I am too. My longest ride on the SC was 45 miles yesterday from Ventura Mission to Summerland, with a couple of inland hills along the way. It's a sweet ride and I'm so glad I was able to rescue it from the trash heap.
I have a '73 SC and all the bits to make it whole again. But stumbled across a bone stock Competition GS that needs to be stripped, polished and put back together. The SC purchase was made because I couldn't find a GS anywhere for yrs.
I'm not sure I would have gone the same direction you did in the restoration, but old bikes are like hot rods...you go in the direction your heart tells you to. Boy, if I had to paint a frame it would most definitely by the old BRG. Your frame looks fantastic!
Kevin
#1245
Member
Beautiful restoration of the '73 Super Course from the trash heap! I rode my '72 SC this past weekend, and I really love it. The wide-range 6 speed freewheel and Sugino AT triple in front are great (vintage) upgrades.
#1246
Full Member
The frame needed more than paint. I decided to add water bottle cage mounts, and replace the brazed on cable guides the previous owner had removed. I chose a modern Toyota Spruce Mica paint color, a little darker than the original Raleigh green, more like a British Racing Green, with little gold flakes for highlight, and reproduction decals from Velocals.
#1247
Senior Member
Join Date: Apr 2017
Location: Los Angeles, CA
Posts: 2,257
Bikes: 1964 Legnano Roma Olympiade, 1973 Raleigh Super Course, 1978 Raleigh Super Course, 1978 Peugeot PR10, 2002 Specialized Allez, 2007 Specialized Roubaix, 2013 Culprit Croz Blade
Mentioned: 68 Post(s)
Tagged: 0 Thread(s)
Quoted: 741 Post(s)
Liked 816 Times
in
420 Posts
I considered powdercoat, but wasn't sure I could find a color I wanted, so I went with regular automotive paint, a factory Toyota color. I can't take credit for the finish, both paint and gold striping were done by the painter. I was worried that powdercoat buildup might obscure the lug detail. My first restoration, so it was be careful, and learn as you go. Fun project and a great ride. It compares quite favorably with my other love, my 1964 Legnano Roma, which is more valuable, but the Raleigh is every bit as nice to ride, especially uphill!
#1248
Senior Member
Join Date: May 2016
Location: Plantation, Fl.
Posts: 60
Bikes: Lotsa
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 19 Post(s)
Likes: 0
Liked 19 Times
in
8 Posts
Restored 1973 SC
Got the frame and some parts for $10. The rust on the chrome and general condition of the paint dictated a renovation, not just just a clean and spruce up. I had it powder coated in gloss black and painted the gold outlining myself. I cheaped out and didn't spend on real Raleigh replacement decals, just the custom vinyl ones you can buy on Ebay. (I think they look OK and the only folks that would know the difference are on this Forum!) All in, I have way less than $400. in the bike, and it was a lot of fun!
Last edited by as50x20; 05-15-17 at 08:20 AM.
#1249
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,420
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 503 Post(s)
Tagged: 0 Thread(s)
Quoted: 7138 Post(s)
Liked 2,086 Times
in
1,240 Posts
@as50x20, that came out well. I suppose the chrome on the frame and fork weren't salvageable? That's OK. You have a nice bike. Have you ridden it much?
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.