headset identification?
#1
commuter
Thread Starter
Join Date: Mar 2010
Posts: 536
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
headset identification?
I have a Stronglight Delta headset that I recently acquired that is stamped on the adjustable race as "1X24F"
I assume the 1x24 means British/ISO threading, but the "F" is throwing me off.
inside crown race diameter = 26.4 on the dot
out side cup diameter = 30.3
So, what do I have? French or British/ISO?
I assume the 1x24 means British/ISO threading, but the "F" is throwing me off.
inside crown race diameter = 26.4 on the dot
out side cup diameter = 30.3
So, what do I have? French or British/ISO?
#2
Cat 6
Join Date: Dec 2007
Location: Mountain Brook, AL
Posts: 7,482
Mentioned: 27 Post(s)
Tagged: 0 Thread(s)
Quoted: 500 Post(s)
Liked 183 Times
in
118 Posts
Not French. British or possibly Italian, which for all practical purposes are interchangeable.
__________________
72 Frejus (for sale), Holdsworth Record (for sale), special CNC & Gitane Interclub / 74 Italvega NR (for sale) / c80 French / 82 Raleigh Intl MkII f&f (for sale)/ 83 Trek 620 (for sale)/ 84 Bruce Gordon Chinook (for sale)/ 85 Ron Cooper / 87 Centurion IM MV (for sale) / 03 Casati Dardo / 08 BF IRO / 09 Dogma FPX / 09 Giant TCX0 / 10 Vassago Fisticuff
72 Frejus (for sale), Holdsworth Record (for sale), special CNC & Gitane Interclub / 74 Italvega NR (for sale) / c80 French / 82 Raleigh Intl MkII f&f (for sale)/ 83 Trek 620 (for sale)/ 84 Bruce Gordon Chinook (for sale)/ 85 Ron Cooper / 87 Centurion IM MV (for sale) / 03 Casati Dardo / 08 BF IRO / 09 Dogma FPX / 09 Giant TCX0 / 10 Vassago Fisticuff
#3
Stop reading my posts!
Join Date: Sep 2004
Posts: 12,577
Mentioned: 89 Post(s)
Tagged: 0 Thread(s)
Quoted: 1442 Post(s)
Liked 1,059 Times
in
784 Posts
I have a Stronglight Delta headset that I recently acquired that is stamped on the adjustable race as "1X24F"
I assume the 1x24 means British/ISO threading, but the "F" is throwing me off.
inside crown race diameter = 26.4 on the dot
out side cup diameter = 30.3
So, what do I have? French or British/ISO?
I assume the 1x24 means British/ISO threading, but the "F" is throwing me off.
inside crown race diameter = 26.4 on the dot
out side cup diameter = 30.3
So, what do I have? French or British/ISO?
Last edited by unworthy1; 12-02-10 at 05:02 PM.
Thread
Thread Starter
Forum
Replies
Last Post
rustystrings61
Classic & Vintage
5
03-31-17 12:55 PM