89? Shogun 800 seatpost
06-06-11, 07:46 PM
#1
Senior Member
Thread Starter
Join Date: Jul 2009
Posts: 90
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
89? Shogun 800 seatpost
As far as I can tell the Laprade 26.8mm post is original to the frame. I have noticed that the binder collar posts are no longer even. As the binder bolt is Campagnolo style, it's not really affecting clamping pressure. I've never had the post slip.
What I'm wondering is if the frame originally took a 27mm post and someone cranked the binder down to fit. Is this plausible?
What I'm wondering is if the frame originally took a 27mm post and someone cranked the binder down to fit. Is this plausible?
06-07-11, 01:23 AM
#2
Senior Member
that's very likely. i have two shogun 1000s with the same frame size; one of them has a post that's .2 mm smaller than the other one. they both fit...it's just a matter of how tight. i suggest bringing it to a shop that has one of those park seat post measuring tools...for good measure. ha.
Thread
Thread Starter
Forum
Replies
Last Post
shuru421
Classic & Vintage
30
01-22-19 08:17 PM
