Peugeot Triathlon 1986
06-18-11, 09:23 AM
#1
Member
Thread Starter
Join Date: Nov 2010
Posts: 32
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Peugeot Triathlon 1986
New project! Been looking for a 64cm PSV10 since my 60cm PSV is just
too small- this is close enough. Just starting to tear it down today.
Good overall condition, no stuck seatpost or stem. Super Vitus 980 tubing, only difference I can find from a PSV are the additional water bottle mounts and the color. I'll have to figure out the seatpost- I have the stock expanding ATAX post, but
is has basically no adjustment range- 5cm. I need it to be about 3cm
longer, will have to make my own unless I can find a longer version of
this post. (unlikely I know.) Since I have the expanding piece, all I
really need is a longer 8mm allen bolt and a 26.4 seatpost that has
enough room on top to locate the hole. Anyone know who makes
super-long bolts like for stems and this crazy seatpost?
too small- this is close enough. Just starting to tear it down today.
Good overall condition, no stuck seatpost or stem. Super Vitus 980 tubing, only difference I can find from a PSV are the additional water bottle mounts and the color. I'll have to figure out the seatpost- I have the stock expanding ATAX post, but
is has basically no adjustment range- 5cm. I need it to be about 3cm
longer, will have to make my own unless I can find a longer version of
this post. (unlikely I know.) Since I have the expanding piece, all I
really need is a longer 8mm allen bolt and a 26.4 seatpost that has
enough room on top to locate the hole. Anyone know who makes
super-long bolts like for stems and this crazy seatpost?
