Mystery frame. 50's? Nervex? England A&P? unusual serial number
#1
Mystery frame. 50's? Nervex? England A&P? unusual serial number
i've been looking for a 1 size smaller frame with some character to build a townie/light duty porteur style/grocery getter type.
i was watching this on eBay with no real intention of bidding, but at the last minute i threw out a bid and won. i had some reservation due to the seller claiming some possible damage to the top tube.
i laid a straight edge in every which direction to try and find said hump and cannot find anything. checked all tubes and nothing. the only thing might be that the top tube has a 'sag' to it in the center, however i could not pass a credit card between the straight edge and tube so i'm not too worried. also, this is the original fork with matching serial number so any frontal impact causing damage to the top tube would surely have taken the fork out with it.
anyway, it will be perfect for my needs and i absolutely LOVE the Nervex lugs, the detailing and sharp edges is to die for!
english thread bottom bracket and headset
Nervex lugs and bottom bracket shell
seat post diameter is 26.4mm
possibly fully chromed at some point, headlugs, entire fork and rear stays/drops are definitely chromed
high-res pictures here: https://www.flickr.com/photos/alexjri...th/5909935317/
serial number on fork and BB is 95112 with a 7 below it (what's all the other gobbledygook beside the serial? angles and such for the BB?)
![](https://farm7.static.flickr.com/6024/5910493922_3cc9053030_b.jpg)
IMG_1284 by shnibop, on Flickr
![](https://farm7.static.flickr.com/6016/5910496930_d7464baa12_b.jpg)
IMG_1297 by shnibop, on Flickr
tubing 'Made in England' by who? A&P A?
![](https://farm7.static.flickr.com/6041/5909935317_3a440b8473_b.jpg)
IMG_1285 by shnibop, on Flickr
anyone recognize this fork crown?
![](https://farm7.static.flickr.com/6037/5909937359_7a5793cf06_b.jpg)
IMG_1294 by shnibop, on Flickr
![](https://farm7.static.flickr.com/6005/5909937915_e9ddaa4308_b.jpg)
IMG_1296 by shnibop, on Flickr
![](https://farm6.static.flickr.com/5318/5910495944_032f45850f_b.jpg)
IMG_1293 by shnibop, on Flickr
![](https://farm6.static.flickr.com/5077/5909937681_1f58a4ddf5_b.jpg)
IMG_1295 by shnibop, on Flickr
![](https://farm7.static.flickr.com/6051/5910495462_a143b82108_b.jpg)
IMG_1291 by shnibop, on Flickr
![](https://farm6.static.flickr.com/5035/5909936301_8c363b6ce8_b.jpg)
IMG_1289 by shnibop, on Flickr
![](https://farm6.static.flickr.com/5076/5909935803_9040ba2653_b.jpg)
IMG_1287 by shnibop, on Flickr
i'd love to know:
who made the frame?
the era?
what kind of tubing?
also, are solid axle/wing nut style axles narrower in diameter than later quick release style hollow axles? i tried to throw a loose Campagnolo Tipo hub in the rear drop outs, the axle will fit but takes an amount of force that would indicate that it's probably not intended to fit this style of axle. can i swap solid axles for the QR axles easily enough? eBay the source for such things? i wanted to build this up with parts i already have, but perhaps a completely different setup would be a better option. not looking to do a period correct build by the way.
i was watching this on eBay with no real intention of bidding, but at the last minute i threw out a bid and won. i had some reservation due to the seller claiming some possible damage to the top tube.
i laid a straight edge in every which direction to try and find said hump and cannot find anything. checked all tubes and nothing. the only thing might be that the top tube has a 'sag' to it in the center, however i could not pass a credit card between the straight edge and tube so i'm not too worried. also, this is the original fork with matching serial number so any frontal impact causing damage to the top tube would surely have taken the fork out with it.
anyway, it will be perfect for my needs and i absolutely LOVE the Nervex lugs, the detailing and sharp edges is to die for!
english thread bottom bracket and headset
Nervex lugs and bottom bracket shell
seat post diameter is 26.4mm
possibly fully chromed at some point, headlugs, entire fork and rear stays/drops are definitely chromed
high-res pictures here: https://www.flickr.com/photos/alexjri...th/5909935317/
serial number on fork and BB is 95112 with a 7 below it (what's all the other gobbledygook beside the serial? angles and such for the BB?)
![](https://farm7.static.flickr.com/6024/5910493922_3cc9053030_b.jpg)
IMG_1284 by shnibop, on Flickr
![](https://farm7.static.flickr.com/6016/5910496930_d7464baa12_b.jpg)
IMG_1297 by shnibop, on Flickr
tubing 'Made in England' by who? A&P A?
![](https://farm7.static.flickr.com/6041/5909935317_3a440b8473_b.jpg)
IMG_1285 by shnibop, on Flickr
anyone recognize this fork crown?
![](https://farm7.static.flickr.com/6037/5909937359_7a5793cf06_b.jpg)
IMG_1294 by shnibop, on Flickr
![](https://farm7.static.flickr.com/6005/5909937915_e9ddaa4308_b.jpg)
IMG_1296 by shnibop, on Flickr
![](https://farm6.static.flickr.com/5318/5910495944_032f45850f_b.jpg)
IMG_1293 by shnibop, on Flickr
![](https://farm6.static.flickr.com/5077/5909937681_1f58a4ddf5_b.jpg)
IMG_1295 by shnibop, on Flickr
![](https://farm7.static.flickr.com/6051/5910495462_a143b82108_b.jpg)
IMG_1291 by shnibop, on Flickr
![](https://farm6.static.flickr.com/5035/5909936301_8c363b6ce8_b.jpg)
IMG_1289 by shnibop, on Flickr
![](https://farm6.static.flickr.com/5076/5909935803_9040ba2653_b.jpg)
IMG_1287 by shnibop, on Flickr
i'd love to know:
who made the frame?
the era?
what kind of tubing?
also, are solid axle/wing nut style axles narrower in diameter than later quick release style hollow axles? i tried to throw a loose Campagnolo Tipo hub in the rear drop outs, the axle will fit but takes an amount of force that would indicate that it's probably not intended to fit this style of axle. can i swap solid axles for the QR axles easily enough? eBay the source for such things? i wanted to build this up with parts i already have, but perhaps a completely different setup would be a better option. not looking to do a period correct build by the way.
#2
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,583
Bikes: https://www.theheadbadge.com
Liked 4,518 Times
in
2,133 Posts
#3
Decrepit Member
A&P is Accles & Pollock, a competitor of Reynolds and acquired by Tube Investments in 1919.
In the early 1960s, there were 11 companies in the steel tube division of Tube Investments, including Accles & Pollock and Reynolds Tube Co. Ltd. (see companies in the red box below).
In the early 1960s, there were 11 companies in the steel tube division of Tube Investments, including Accles & Pollock and Reynolds Tube Co. Ltd. (see companies in the red box below).
![](https://i32.photobucket.com/albums/d7/k4drd/Bicycles/Tubing/TubeInvestmentsOrg.jpg)
Last edited by Scooper; 07-06-11 at 05:55 PM.
#5
multimodal commuter
Join Date: Nov 2006
Location: NJ, NYC, LI
Posts: 19,809
Bikes: 1940s Fothergill, 1959 Allegro Special, 1963? Claud Butler Olympic Sprint, Lambert 'Clubman', 1974 Fuji "the Ace", 1976 Holdsworth 650b conversion rando bike, 1983 Trek 720 tourer, 1984 Counterpoint Opus II, 1993 Basso Gap, 2010 Downtube 8h, and...
Liked 575 Times
in
340 Posts
Looks like a nice frame!
My Fothergill has a similar accles & pollock stamping on the steerer tube, but the traces of the tubing decal on the seat tube were consistent with the size and shape of a Reynolds 531 decal. I don't know any other way to tell the tubings apart (the weight of the frame is consistent with 531, but Kromo wouldn't be different). I put a 531 decal on it.
Is there only one shifter boss? That's a 50's thing. It'll probably fit a Simplex or Cyclo Benelux shifter. A good way to use that is with Sturmey Archer AW hub with two cogs and a derailleur; this gives six evenly spaced gears.
My Fothergill has a similar accles & pollock stamping on the steerer tube, but the traces of the tubing decal on the seat tube were consistent with the size and shape of a Reynolds 531 decal. I don't know any other way to tell the tubings apart (the weight of the frame is consistent with 531, but Kromo wouldn't be different). I put a 531 decal on it.
Is there only one shifter boss? That's a 50's thing. It'll probably fit a Simplex or Cyclo Benelux shifter. A good way to use that is with Sturmey Archer AW hub with two cogs and a derailleur; this gives six evenly spaced gears.
#7
Rustbelt Rider
Join Date: Oct 2008
Location: Canton, OH
Posts: 9,106
Bikes: 1990 Trek 1420 - 1978 Raleigh Professional - 1973 Schwinn Collegiate - 1974 Schwinn Suburban
Liked 372 Times
in
177 Posts
That really is a great looking frame.
__________________
|^^^^^^^^^^^^^^| ||
|......GO.BROWNS........| ||'|";, ___.
|_..._..._______===|=||_|__|..., ] -
"(@)'(@)"""''"**|(@)(@)*****''(@)
|^^^^^^^^^^^^^^| ||
|......GO.BROWNS........| ||'|";, ___.
|_..._..._______===|=||_|__|..., ] -
"(@)'(@)"""''"**|(@)(@)*****''(@)
#8
Looks like a nice frame!
My Fothergill has a similar accles & pollock stamping on the steerer tube, but the traces of the tubing decal on the seat tube were consistent with the size and shape of a Reynolds 531 decal. I don't know any other way to tell the tubings apart (the weight of the frame is consistent with 531, but Kromo wouldn't be different). I put a 531 decal on it.
Is there only one shifter boss? That's a 50's thing. It'll probably fit a Simplex or Cyclo Benelux shifter. A good way to use that is with Sturmey Archer AW hub with two cogs and a derailleur; this gives six evenly spaced gears.
My Fothergill has a similar accles & pollock stamping on the steerer tube, but the traces of the tubing decal on the seat tube were consistent with the size and shape of a Reynolds 531 decal. I don't know any other way to tell the tubings apart (the weight of the frame is consistent with 531, but Kromo wouldn't be different). I put a 531 decal on it.
Is there only one shifter boss? That's a 50's thing. It'll probably fit a Simplex or Cyclo Benelux shifter. A good way to use that is with Sturmey Archer AW hub with two cogs and a derailleur; this gives six evenly spaced gears.
![Smilie](https://www.bikeforums.net/images/smilies/smile.gif)
![](https://farm6.static.flickr.com/5236/5909935603_660e6f5843_b.jpg)
IMG_1286 by shnibop, on Flickr
#11
Decrepit Member
. . . From the days when companies were hiring.
#12
Senior Member
Join Date: Nov 2005
Posts: 5,768
Bikes: Cinelli, Paramount, Raleigh, Carlton, Zeus, Gemniani, Frejus, Legnano, Pinarello, Falcon
Likes: 0
Liked 9 Times
in
9 Posts
I was watching that on ebay, looks like a nice frame. Damage concerned me.
Don't know why, but fork crown looks Italian to me...
Don't know why, but fork crown looks Italian to me...
#13
Wood
Join Date: Jun 2009
Location: Beaumont, Tx
Posts: 2,293
Bikes: Raleigh Sports: hers. Vianelli Professional & Bridgestone 300: mine
Likes: 0
Liked 12 Times
in
10 Posts
Beautiful and full of potential.
I really like how you won't have to listen to everyone wailing to you to leave the finish original.
I really like how you won't have to listen to everyone wailing to you to leave the finish original.
#14
[QUOTE=dbakl;12892361
Don't know why, but fork crown looks Italian to me...[/QUOTE]
the crown is definitely made for Imperial pattern blades (like domestic Reynolds) and is either cast or forged...not likely Italian.
I can't seem to find Milremo catalog scans anywhere on the Interwebs, today, but I'd guess this is either one of those (read Bocama made for Ron Kit) or a Vagner. So I'd say "French". It has a slight resemblance to another FR make: one of the Nervex Super Legere patterns, but those were supposedly welded-up crowns, not forged.
Don't know why, but fork crown looks Italian to me...[/QUOTE]
the crown is definitely made for Imperial pattern blades (like domestic Reynolds) and is either cast or forged...not likely Italian.
I can't seem to find Milremo catalog scans anywhere on the Interwebs, today, but I'd guess this is either one of those (read Bocama made for Ron Kit) or a Vagner. So I'd say "French". It has a slight resemblance to another FR make: one of the Nervex Super Legere patterns, but those were supposedly welded-up crowns, not forged.
#15
thanks for all the feedback so far guys/gals!
i checked around on the Freddie Grubb possibility, however i don't think that's what this is. there are quite a few similarities but also some differences in details that were consistent in the confirmed F.G. frames, my frame lacked those certain details. also, i checked inside the head tube and have since sanded some of the paint... there was/are no head badge holes.
i've also sanded through the green, then the brown/primer layers to try and find any remnants of decals on the main triangle tubes, there are no longer signs of decals or original paint color.
however, there is this metallic candy pink color on the fixed cup side of the BB, around the lugs of the BB, inside the BB on the ends of the chain stay tubes and on the back of seat lug (all the hard to reach spots perhaps, DIY painter got lazy?). i believe this would be the original color although this doesn't narrow down the frame builder obviously/unfortunately.
![](https://farm7.static.flickr.com/6007/5914098002_c9c3dea3ab_b.jpg)
IMG_1300 by shnibop, on Flickr
![](https://farm7.static.flickr.com/6010/5913536899_51a7024bee_b.jpg)
IMG_1303 by shnibop, on Flickr
![](https://farm7.static.flickr.com/6015/5914098416_e858f9f74f_b.jpg)
IMG_1304 by shnibop, on Flickr
any more incite?
i checked around on the Freddie Grubb possibility, however i don't think that's what this is. there are quite a few similarities but also some differences in details that were consistent in the confirmed F.G. frames, my frame lacked those certain details. also, i checked inside the head tube and have since sanded some of the paint... there was/are no head badge holes.
i've also sanded through the green, then the brown/primer layers to try and find any remnants of decals on the main triangle tubes, there are no longer signs of decals or original paint color.
however, there is this metallic candy pink color on the fixed cup side of the BB, around the lugs of the BB, inside the BB on the ends of the chain stay tubes and on the back of seat lug (all the hard to reach spots perhaps, DIY painter got lazy?). i believe this would be the original color although this doesn't narrow down the frame builder obviously/unfortunately.
![](https://farm7.static.flickr.com/6007/5914098002_c9c3dea3ab_b.jpg)
IMG_1300 by shnibop, on Flickr
![](https://farm7.static.flickr.com/6010/5913536899_51a7024bee_b.jpg)
IMG_1303 by shnibop, on Flickr
![](https://farm7.static.flickr.com/6015/5914098416_e858f9f74f_b.jpg)
IMG_1304 by shnibop, on Flickr
any more incite?
#17
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,583
Bikes: https://www.theheadbadge.com
Liked 4,518 Times
in
2,133 Posts
#18
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,856
Bikes: Several, mostly not name brands.
Liked 3,460 Times
in
1,964 Posts
the crown is definitely made for Imperial pattern blades (like domestic Reynolds) and is either cast or forged...not likely Italian.
I can't seem to find Milremo catalog scans anywhere on the Interwebs, today, but I'd guess this is either one of those (read Bocama made for Ron Kit) or a Vagner. So I'd say "French". It has a slight resemblance to another FR make: one of the Nervex Super Legere patterns, but those were supposedly welded-up crowns, not forged.
I can't seem to find Milremo catalog scans anywhere on the Interwebs, today, but I'd guess this is either one of those (read Bocama made for Ron Kit) or a Vagner. So I'd say "French". It has a slight resemblance to another FR make: one of the Nervex Super Legere patterns, but those were supposedly welded-up crowns, not forged.
![](https://www.os2.dhs.org/~john/milremo.jpg)
#19
true, and thanks for that scan. Ever see a forged/cast Vagner (or any other) crown with letters and numbers in the underside like the OP's?
#20
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,652
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Liked 2,621 Times
in
1,525 Posts
My usual response to the "help me ID this" threads is, "I don't know, but it sure is nice!"
And it applies here.
Not true. In the early 20th century, pink was for boys and blue was for girls.
I have more shirts in pink than any other color.
And it applies here.
I have more shirts in pink than any other color.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#21
That's with sirts. Not a steel riding machine. Don't get me wrong, it's pink all the way. I have had 4 pink/yellow Ironman bikes.
#22
multimodal commuter
Join Date: Nov 2006
Location: NJ, NYC, LI
Posts: 19,809
Bikes: 1940s Fothergill, 1959 Allegro Special, 1963? Claud Butler Olympic Sprint, Lambert 'Clubman', 1974 Fuji "the Ace", 1976 Holdsworth 650b conversion rando bike, 1983 Trek 720 tourer, 1984 Counterpoint Opus II, 1993 Basso Gap, 2010 Downtube 8h, and...
Liked 575 Times
in
340 Posts
#23
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,652
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Liked 2,621 Times
in
1,525 Posts
See, now you know me completely!
I was riding my bike in Maplewood a couple of years ago, wearing a pink polo shirt, and someone leaned out of the car she was riding in and yelled, "Nice shirt ... QUEER!"
I was perplexed, but when I retold the story on maplewoodonline.com, people got upset. This is supposed to be one of the most gay-friendly towns.
I was riding my bike in Maplewood a couple of years ago, wearing a pink polo shirt, and someone leaned out of the car she was riding in and yelled, "Nice shirt ... QUEER!"
I was perplexed, but when I retold the story on maplewoodonline.com, people got upset. This is supposed to be one of the most gay-friendly towns.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#24
multimodal commuter
Join Date: Nov 2006
Location: NJ, NYC, LI
Posts: 19,809
Bikes: 1940s Fothergill, 1959 Allegro Special, 1963? Claud Butler Olympic Sprint, Lambert 'Clubman', 1974 Fuji "the Ace", 1976 Holdsworth 650b conversion rando bike, 1983 Trek 720 tourer, 1984 Counterpoint Opus II, 1993 Basso Gap, 2010 Downtube 8h, and...
Liked 575 Times
in
340 Posts
Her problem if any, not yours.
My wife just called me from Target asking me if I'd wear plaid shorts. I said, if you think I'll wear them, I'll wear them. She may regret this, but I won't be bothered one way or nother.
My wife just called me from Target asking me if I'd wear plaid shorts. I said, if you think I'll wear them, I'll wear them. She may regret this, but I won't be bothered one way or nother.
#25
incazzare.
See, now you know me completely!
I was riding my bike in Maplewood a couple of years ago, wearing a pink polo shirt, and someone leaned out of the car she was riding in and yelled, "Nice shirt ... QUEER!"
I was perplexed, but when I retold the story on maplewoodonline.com, people got upset. This is supposed to be one of the most gay-friendly towns.
I was riding my bike in Maplewood a couple of years ago, wearing a pink polo shirt, and someone leaned out of the car she was riding in and yelled, "Nice shirt ... QUEER!"
I was perplexed, but when I retold the story on maplewoodonline.com, people got upset. This is supposed to be one of the most gay-friendly towns.