Go Back  Bike Forums > Bike Forums > Classic & Vintage
Reload this Page >

How flexible are C&V hunters regarding frame size?

Notices
Classic & Vintage This forum is to discuss the many aspects of classic and vintage bicycles, including musclebikes, lightweights, middleweights, hi-wheelers, bone-shakers, safety bikes and much more.

How flexible are C&V hunters regarding frame size?

Old 08-12-11, 01:51 AM
  #1  
Senior Member
Thread Starter
 
AS Collie's Avatar
 
Join Date: Jan 2011
Location: Rome, Italy.
Posts: 275

Bikes: Pelizzoli custom, 90s Moser Pro, Colnago Super, usually A.N. Other passing through

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
How flexible are C&V hunters regarding frame size?

Hey all,

This is a question that's been bugging me for a while.

Rightly or wrongly, I've always maintained that just slapping a bike with a numbered size, eg 56cm, was dumb. But the guys I ride with all swear by it. They won't even consider going to see a bike that's not "their size".

In the hunt for some classic beauties, I'm always willing to go a little over or under size-wise, as I'm convinced that I can still set the bike up to be comfortable. Am I wrong? What kind of size range do people operate in?

(All of this is being asked because I really wanna convince myself to buy a slightly-too-big C-Record equipped Grandis .)
AS Collie is offline  
Old 08-12-11, 02:37 AM
  #2  
Senior Member
 
Join Date: Jan 2011
Location: phoenix
Posts: 491

Bikes: Miyata 110, Schwinn super le tour 12.2, Schwinn super sport, Lemond Zurich

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
I ride anywhere from a 48 cm to a 54 cm bike. I could probably go smaller too, but I don't think they make bikes that small.
frenchbikefan is offline  
Old 08-12-11, 02:45 AM
  #3  
Senior Member
Thread Starter
 
AS Collie's Avatar
 
Join Date: Jan 2011
Location: Rome, Italy.
Posts: 275

Bikes: Pelizzoli custom, 90s Moser Pro, Colnago Super, usually A.N. Other passing through

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by frenchbikefan
I ride anywhere from a 48 cm to a 54 cm bike. I could probably go smaller too, but I don't think they make bikes that small.
Wow! That much? Great! I've only gone in the 56-60 range, 58 being my ideal (if there is one). Not to put too crude a point on it, but I've always thought that once I can't break my b.... on the top tube, it's good to go.
AS Collie is offline  
Old 08-12-11, 02:46 AM
  #4  
Senior Member
 
Join Date: Jan 2011
Location: phoenix
Posts: 491

Bikes: Miyata 110, Schwinn super le tour 12.2, Schwinn super sport, Lemond Zurich

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
If I had to step off my 54 quickly, my parents would be lucky they have two other sons to give them grand children
frenchbikefan is offline  
Old 08-12-11, 02:49 AM
  #5  
Senior Member
Thread Starter
 
AS Collie's Avatar
 
Join Date: Jan 2011
Location: Rome, Italy.
Posts: 275

Bikes: Pelizzoli custom, 90s Moser Pro, Colnago Super, usually A.N. Other passing through

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by frenchbikefan
If I had to step off my 54 quickly, my parents would be lucky they have two other sons to give them grand children
haha.
AS Collie is offline  
Old 08-12-11, 04:12 AM
  #6  
Senior Member
 
wtgrantham's Avatar
 
Join Date: Dec 2008
Posts: 167
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 4 Times in 4 Posts
I stay flexible in the 57-61 range but try to stay in the middle with 59 or 60 being about right.
wtgrantham is offline  
Old 08-12-11, 04:43 AM
  #7  
Senior Member
 
Whit51's Avatar
 
Join Date: Sep 2007
Location: Reston VA
Posts: 562
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 85 Post(s)
Liked 74 Times in 55 Posts
I ride bikes between 54 and 58 cm. If I'm looking for a keeper, it has to fit me or a family member. I will snap up a bike, regardless of size, if it has parts I want or if I think I can sell it, as long as it is priced right.
Whit51 is offline  
Old 08-12-11, 04:45 AM
  #8  
Senior Member
 
Michael Angelo's Avatar
 
Join Date: May 2010
Location: Hurricane Alley , Florida
Posts: 3,904

Bikes: Treks (USA), Schwinn Paramount, Schwinn letour,Raleigh Team Professional, Gazelle GoldLine Racing, 2 Super Mondias, Carlton Professional.

Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 79 Post(s)
Liked 32 Times in 23 Posts
58-62cm for me. Anything smaller makes me fell like a circus clown. Also, I always bring a measuring tape just to be sure. You can't go by what's stamped on the Bottom bracket, lots of companies measure center to top of seat tube. Tallest bike I have is an NOS 67cm Super Course, I really need to sell it. I don't ride it and needs a new home.
Michael Angelo is offline  
Old 08-12-11, 04:45 AM
  #9  
Senior Member
 
Join Date: Aug 2010
Location: Scottsdale, AZ
Posts: 159

Bikes: 3Rensho Super Record Export, Zunow Z-1, Andy Gilmour Breakaway, Sycip 26er

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 1 Time in 1 Post
47-52, I can't really standover anything larger than that, though I wish I could!
irvri is offline  
Old 08-12-11, 05:06 AM
  #10  
Senior Member
 
miamijim's Avatar
 
Join Date: Aug 2003
Location: Tampa, Florida
Posts: 13,954
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 413 Post(s)
Likes: 0
Liked 110 Times in 79 Posts
54cm top tubes almost exclusively with a +/- .5cm variance depending on ST tube length.
miamijim is offline  
Old 08-12-11, 05:23 AM
  #11  
Senior Member
 
Join Date: Oct 2010
Location: Minnesota- the frozen tundra
Posts: 1,946

Bikes: 1977 Raleigh Super Grand Prix, 1976 Gitane Tour de France

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 2 Times in 2 Posts
My main bike is a 68cm and my backup is a 64cm, I might be able to ride a smaller frame if it had a long enough top tube.
SteveSGP is offline  
Old 08-12-11, 05:28 AM
  #12  
Senior Member
 
bikemanbob's Avatar
 
Join Date: Jul 2010
Location: Metro Detroit
Posts: 858

Bikes: Bertoni Corsa Mondiale, Bridgestone T-700, Miyata 700 GT, Trek 600, Trek 560 Professional Series, Chrome Panasonic DX 2000, Peugeot PH12, Peugeot PX10, Schwinn World Voyageur, Schwinn Circuit, and Schwinn Voyageur

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 4 Times in 4 Posts
If I'm going to buy a modern bike, I buy the right size. However, when I buy a classic, I buy a bike from 21" to 23". Size is not nearly as important when I'm buying a vintage bike. I prefer a bike that is larger rather than smaller. By changing the stem and seat post, I can create the right room in the cockpit. I tend to prefer longer reach, and I make the necessary adjustment to create the right feel.
bikemanbob is offline  
Old 08-12-11, 05:32 AM
  #13  
Senior Member
Thread Starter
 
AS Collie's Avatar
 
Join Date: Jan 2011
Location: Rome, Italy.
Posts: 275

Bikes: Pelizzoli custom, 90s Moser Pro, Colnago Super, usually A.N. Other passing through

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by FORDSVTPARTS
My main bike is a 68cm and my backup is a 64cm, I might be able to ride a smaller frame if it had a long enough top tube.
68!?! If you ever come to Italy, you'll have to do a lot of stooping!!! The average size here is around 52, so I often see bargains in the 58-60 range. But I've never seen one bigger than 60 on these shores.
AS Collie is offline  
Old 08-12-11, 05:50 AM
  #14  
Senior Member
 
Drummerboy1975's Avatar
 
Join Date: Jul 2011
Location: Arkansas
Posts: 1,367

Bikes: '81 Fuji Royale/ '96 Rockhopper

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 34 Post(s)
Liked 6 Times in 4 Posts
It depends on how cold it is out side weather or not I can ride a bike thats a bit taller.
Drummerboy1975 is offline  
Old 08-12-11, 05:50 AM
  #15  
OldSchool
 
Join Date: Jul 2007
Location: Chesapeake, VA
Posts: 1,233
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 82 Post(s)
Liked 28 Times in 20 Posts
Originally Posted by miamijim
54cm top tubes almost exclusively with a +/- .5cm variance depending on ST tube length.
Same for me with the top tube length which means seat tube c-c 53 to maybe 55. Don't like to go lower than 53 on the seat tube because too much seat post gets exposed and seat height to stem height gets funky. I do have a Primato that's a 55 top tube with a 55.5 seat tube and it fits great because I have first generation Chorus with friction shifters and the brake lever hoods are so compact it shortens the reach requirement by almost 2 cm. When Campy went to ergo shifters, the hood lengths really increased which makes a big difference in an ergo bike for me. I can't ride a 55 with ergos. Too stretched out.

Last edited by cpsqlrwn; 08-12-11 at 05:57 AM.
cpsqlrwn is offline  
Old 08-12-11, 05:55 AM
  #16  
rhm
multimodal commuter
 
rhm's Avatar
 
Join Date: Nov 2006
Location: NJ, NYC, LI
Posts: 19,809

Bikes: 1940s Fothergill, 1959 Allegro Special, 1963? Claud Butler Olympic Sprint, Lambert 'Clubman', 1974 Fuji "the Ace", 1976 Holdsworth 650b conversion rando bike, 1983 Trek 720 tourer, 1984 Counterpoint Opus II, 1993 Basso Gap, 2010 Downtube 8h, and...

Mentioned: 584 Post(s)
Tagged: 0 Thread(s)
Quoted: 1908 Post(s)
Liked 575 Times in 340 Posts
60 seems about right for me, anything 58 to 62 feels fine, but outside that range is still perfectly rideable and still worth checking out. I'm perfectly comfortable on a 55 or 56 for shorter rides, I just don't think I'd want to do a century on a really small one. Now I have a 63 that seems very comfortable as well.

Bottom line, I'd say go check out whatever interests you. If it's too small, use that as a talking point to drive the price down!
rhm is offline  
Old 08-12-11, 06:00 AM
  #17  
Cisalpinist
 
Italuminium's Avatar
 
Join Date: Jan 2011
Location: Holland
Posts: 5,557

Bikes: blue ones.

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 17 Times in 12 Posts
I tend to focus more on the horizontal plane because my body is more picky in that direction . I think that bikes (for me) are best judged in overall reach (rough method: tt length+stem size). I tend to shoot for something like 64 cm on most of my (drop bar) bikes, with a cm or so of wiggle room on either side. That works out well. Assuming the world is full of square build bikes and stems go from 8 to 13 cm the puts me on anything from 51 to 57. Standover is not much of an issue, I can clear a size 60 frame. Frame dynamics of course change with size, so for go-fast applications I prefer a smaller frame with more cm's in the stem, and for comfy cruisers I like higher frames.
Italuminium is offline  
Old 08-12-11, 06:00 AM
  #18  
Senior Member
 
Kobe's Avatar
 
Join Date: Feb 2007
Location: Schwenksville, Pa
Posts: 2,778
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 278 Post(s)
Liked 350 Times in 184 Posts
Originally Posted by FORDSVTPARTS
My main bike is a 68cm and my backup is a 64cm, I might be able to ride a smaller frame if it had a long enough top tube.
Ditto this, except I am starting to switch around to a 64cm as more comfortable, but with a long stem.
Kobe is offline  
Old 08-12-11, 06:05 AM
  #19  
Senior Member
Thread Starter
 
AS Collie's Avatar
 
Join Date: Jan 2011
Location: Rome, Italy.
Posts: 275

Bikes: Pelizzoli custom, 90s Moser Pro, Colnago Super, usually A.N. Other passing through

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by rhm
If it's too small, use that as a talking point to drive the price down!
I've already given him the whole "it's a little too big for me, can we do something on the price" line! Some times the simple ones work best.
AS Collie is offline  
Old 08-12-11, 06:12 AM
  #20  
Senior Member
 
AZORCH's Avatar
 
Join Date: Aug 2010
Location: Liberty, Missouri
Posts: 3,120

Bikes: 1966 Paramount | 1971 Raleigh International | ca. 1970 Bernard Carre | 1989 Waterford Paramount | 2012 Boulder Brevet | 2019 Specialized Diverge

Mentioned: 23 Post(s)
Tagged: 0 Thread(s)
Quoted: 129 Post(s)
Liked 78 Times in 41 Posts
My range is 58 to 62; I won't consider anything outside that range any more. A long time ago, I drank the Kool-Aid and believed the bike markings (when they existed), but there are too many other variables. My keepers are all dialed in very precisely to my fit and I keep a list of measurements on my Droid to compare against: seat and top tube c-c, seat post to stem extension/handlebar junction c-c, stand over; I also differentiate between touring and road bikes due to variances in geometry. The point is that I know what will fit me very well vs. what I can acceptably ride. (I also don't buy in to the bike shop ideal fit either: my LBS places me firmly in the 58 category, but I know from experience that I will limber up a few minutes into a ride and that I'm much more comfortable on a 60.) When it comes right down to it, the measuring tape only helps me to cull out frames I definitely can't ride; I still need to get on a bike and "feel" it.
AZORCH is offline  
Old 08-12-11, 06:33 AM
  #21  
Bianchi Goddess
 
Bianchigirll's Avatar
 
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 27,938

Bikes: Too many to list here check my signature.

Mentioned: 194 Post(s)
Tagged: 2 Thread(s)
Quoted: 2957 Post(s)
Liked 3,029 Times in 1,542 Posts
I try not to stray to far. generally a 59 or 60 is perfect but once in a great while I'll go for a 58.

it also depends on the price. when a customer gave me a Fuji Pro Super Record, I tried real hard to make it fit but alas it was just a bit too small. the extra long seatpost and taller stem made it look ungainly so I passed it along. I think it is now in the hands of only the 4th owner in it life.
__________________
One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"

Sugar "Kane" Kowalczyk
Bianchigirll is offline  
Old 08-12-11, 06:42 AM
  #22  
FBoD Member at Large
 
khatfull's Avatar
 
Join Date: Aug 2008
Location: Woodbury, MN
Posts: 6,094
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 30 Post(s)
Likes: 0
Liked 7 Times in 7 Posts
58 is my smallest and reserved for bikes more setup for go-fast fits.
59-61 is ideal.
62 is doable.

And this is in Fuji...who measured center to the very tip top of the seat lug.

I was surprised to see how many folks listed 58-62 as a range.
khatfull is offline  
Old 08-12-11, 06:49 AM
  #23  
Senior Member
 
Bikedued's Avatar
 
Join Date: Jul 2004
Posts: 10,963
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 205 Post(s)
Liked 107 Times in 60 Posts
58 to 61 here, at least in vintage steel bikes. The new bikes marked 58 to 61 are huge, and feel more like 61-64cm. I am not sure where they're getting their measuring tapes, hehe.,,,,BD
__________________
So many bikes, so little dime.
Bikedued is offline  
Old 08-12-11, 07:19 AM
  #24  
Senior Member
 
Glennfordx4's Avatar
 
Join Date: Nov 2008
Location: South Jersey
Posts: 1,959

Bikes: Too many Bicycles to list

Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 90 Post(s)
Liked 138 Times in 45 Posts
I can ride 58 to 62 on vintage steel also with 60-61 being about perfect in the seat tube but I have a longer upper half so anything shorter then 60 in a TT will require a longer stem. My Centurion Elite that is a 60 ST & a 58 TT requires me to use a 130 stem to feel comfortable on.
Glennfordx4 is offline  
Old 08-12-11, 07:46 AM
  #25  
incazzare.
 
lostarchitect's Avatar
 
Join Date: Mar 2010
Location: Catskills/Brooklyn, NY
Posts: 6,970

Bikes: See sig

Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 40 Post(s)
Liked 55 Times in 38 Posts
I can ride from 53 to 56 or so. My legs are a bit short, so the TT on a 56 is right up there, you know? But the length feels better at that size because my arms are longish. It's always a compromise until one day I have a frame made to fit.
__________________
1964 JRJ (Bob Jackson), 1973 Wes Mason, 1974 Raleigh Gran Sport, 1986 Schwinn High Sierra, 2000ish Colian (Colin Laing), 2011 Dick Chafe, 2013 Velo Orange Pass Hunter
lostarchitect is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.