Hanging a bike
#1
Senior Member
Thread Starter
Join Date: Oct 2008
Location: Akron, OH
Posts: 430
Bikes: 2008 Seven Axiom Steel, 1984 Colnago Nuovo Mexico, 2008 Cervelo P2C, 2000 Trek Multitrack 7200
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 17 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Hanging a bike
A recent post about bike storage stands got me thinking about the wisdon of hanging a bike from a hook for storage. I have a Raleigh Tourist (really heavy bike) and it's hard for me to believe that hanging this bike over the winter months (which I do) wouldn't result in long term damage to the wheel. I've done this the past four winters with my road bike (really light bike) and I can't see that anything was damaged, but the Tourist ...?
TSapp
TSapp
#2
Senior Member
I've wondered about this myself, a 25-30 pound bike hanging from a lag hook does'nt seem to be great weight distibution as well as the fact that your applying pressure from the opposite side of the rim as intended. Here at my house, my wife seems to think the support beams on the main floor are going to give way and bring the house down from all the bikes and frames hanging down in the basement.
__________________
Be where your feet are.......Lisa Bluder
Be where your feet are.......Lisa Bluder
#3
Membership Not Required
Join Date: Jan 2005
Location: On the road-USA
Posts: 16,855
Bikes: Giant Excursion, Raleigh Sports, Raleigh R.S.W. Compact, Motobecane? and about 20 more! OMG
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 70 Post(s)
Likes: 0
Liked 15 Times
in
14 Posts
There was an article written somewhere a while back about this. Apparently because a wheel is a stressed system it doesn't hurt it, even with a heavier bike. FWIW my heavier bikes sit on the floor or are on low frame racks...I am not about to throw my back out trying to get something the size of a DL-1 on an overhead hook!
Aaron
Aaron
__________________
Webshots is bailing out, if you find any of my posts with corrupt picture files and want to see them corrected please let me know. :(
ISO: A late 1980's Giant Iguana MTB frameset (or complete bike) 23" Red with yellow graphics.
"Cycling should be a way of life, not a hobby.
RIDE, YOU FOOL, RIDE!"_Nicodemus
"Steel: nearly a thousand years of metallurgical development
Aluminum: barely a hundred
Which one would you rather have under your butt at 30mph?"_krazygluon
Webshots is bailing out, if you find any of my posts with corrupt picture files and want to see them corrected please let me know. :(
ISO: A late 1980's Giant Iguana MTB frameset (or complete bike) 23" Red with yellow graphics.
"Cycling should be a way of life, not a hobby.
RIDE, YOU FOOL, RIDE!"_Nicodemus
"Steel: nearly a thousand years of metallurgical development
Aluminum: barely a hundred
Which one would you rather have under your butt at 30mph?"_krazygluon
#4
Bianchi Goddess
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 27,858
Bikes: Too many to list here check my signature.
Mentioned: 192 Post(s)
Tagged: 2 Thread(s)
Quoted: 2930 Post(s)
Liked 2,925 Times
in
1,491 Posts
Supporting its own weight hanging on a hook can't be any harder on the bike than toting my big bum over rough roads.
__________________
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
#5
Banned.
Join Date: Dec 2007
Posts: 27,199
Mentioned: 34 Post(s)
Tagged: 1 Thread(s)
Quoted: 378 Post(s)
Liked 1,409 Times
in
909 Posts
That certainly applies to me. A bike is actually suspended from the top of the rims by the upper spokes. This includes the loaded weight. Hanging it from a hook on the ceiling is nothing, really.
#6
Curmudgeon in Training
Join Date: May 2009
Location: Rural Retreat, VA
Posts: 1,956
Bikes: 1974 Gazelle Champion Mondial, 2010 Cannondale Trail SL, 1988 Peugeot Nice, 1992ish Stumpjumper Comp,1990's Schwinn Moab
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 19 Post(s)
Likes: 0
Liked 9 Times
in
8 Posts
My room mate and I have the rubbermaid track system for hanging ours. Neither of us have noticed any ill effects.
#7
incazzare.
Think about it. I'm pretty sure your body puts more stress on the wheels than the weight of the frame hanging off them.
__________________
1964 JRJ (Bob Jackson), 1973 Wes Mason, 1974 Raleigh Gran Sport, 1986 Schwinn High Sierra, 2000ish Colian (Colin Laing), 2011 Dick Chafe, 2013 Velo Orange Pass Hunter
1964 JRJ (Bob Jackson), 1973 Wes Mason, 1974 Raleigh Gran Sport, 1986 Schwinn High Sierra, 2000ish Colian (Colin Laing), 2011 Dick Chafe, 2013 Velo Orange Pass Hunter
#8
Hogosha Sekai
Join Date: Jun 2011
Location: STS
Posts: 6,669
Bikes: Leader 725, Centurion Turbo, Scwhinn Peloton, Schwinn Premis, GT Tequesta, Bridgestone CB-2,72' Centurion Lemans, 72 Raleigh Competition
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 70 Post(s)
Likes: 0
Liked 21 Times
in
15 Posts
Terrible idea... hanging an old boat anchor on a hook sucks... for your back. That said I've got a 67 racer deluxe hanging on a wall right now.. it stays up there for months at a time and the only problem I have is when it comes time to put it up or take it down!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
#9
Rustbelt Rider
Join Date: Oct 2008
Location: Canton, OH
Posts: 9,104
Bikes: 1990 Trek 1420 - 1978 Raleigh Professional - 1973 Schwinn Collegiate - 1974 Schwinn Suburban
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 261 Post(s)
Liked 372 Times
in
177 Posts
Worry not. My DL-1 hangs by it's front wheel in my basement. It's been there a lot over the past year without even a bit of damage.
__________________
|^^^^^^^^^^^^^^| ||
|......GO.BROWNS........| ||'|";, ___.
|_..._..._______===|=||_|__|..., ] -
"(@)'(@)"""''"**|(@)(@)*****''(@)
|^^^^^^^^^^^^^^| ||
|......GO.BROWNS........| ||'|";, ___.
|_..._..._______===|=||_|__|..., ] -
"(@)'(@)"""''"**|(@)(@)*****''(@)
#10
Friendship is Magic
Join Date: Nov 2010
Location: Sacramento, CA
Posts: 22,984
Bikes: old ones
Mentioned: 304 Post(s)
Tagged: 0 Thread(s)
Quoted: 26419 Post(s)
Liked 10,380 Times
in
7,208 Posts
Get yourself a bike wheel from somewhere and experiment.
Hook it to something that will not actually dent the rim and pull
as hard as you can on it. Hang from the ceiling yourself on it.
If you can deform it, the spokes were not properly tensioned.
A good wheel is tensioned to 110-125Kgf.
Like everyone has said prior, the weight of your bike just is
not an issue. I've got a dozen bikes that have been stored
this way for years.
Hook it to something that will not actually dent the rim and pull
as hard as you can on it. Hang from the ceiling yourself on it.
If you can deform it, the spokes were not properly tensioned.
A good wheel is tensioned to 110-125Kgf.
Like everyone has said prior, the weight of your bike just is
not an issue. I've got a dozen bikes that have been stored
this way for years.
__________________
#11
Senior Member
Join Date: Apr 2007
Location: Thunder Bay, Ontario, Canada - burrrrr!
Posts: 11,674
Bikes: 1958 Rabeneick 120D, 1968 Legnano Gran Premio, 196? Torpado Professional, 2000 Marinoni Piuma
Mentioned: 210 Post(s)
Tagged: 0 Thread(s)
Quoted: 1372 Post(s)
Likes: 0
Liked 1,751 Times
in
938 Posts
The only problem with hanging a bicycle is the stuff it hangs on. I have lots of bikes and the plastic covering on the hooks has a tendency to wear through. Once worn through, the metal of the hook will damage an alloy wheel rim. I prevent this by wrapping the hooks with strips of inner tube and PVC taping it into place.
__________________
"98% of the bikes I buy are projects".
"98% of the bikes I buy are projects".
#12
Senior Member
TSapp, The only bikes I haven't had hanging upside down on hooks are my mountain bikes with a suspension fork. I'm not quite sure about bikes equipped with hydraulic brakes.
Brad
Brad
#13
Icantre Member
Join Date: Jun 2011
Location: the Bayou City perpetually under construction
Posts: 384
Bikes: 2001 DBR Axis TT, 1998 Trek 5500 OCLV, 1993 Trek 1100, 1971 Raleigh Grand Prix, 1972 Gitane Attic Beater
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I hung a 30lb Raleigh Gran Prix by it's rear wheel on a single rubber coated hook in my garage for 20 years untouched with absolutely no resultant damage. The tires didn't even rot.
#14
Senior Member
Join Date: Jul 2009
Posts: 11,128
Bikes: 1986 Alan Record Carbonio, 1985 Vitus Plus Carbone 7, 1984 Peugeot PSV, 1972 Line Seeker, 1986(est.) Medici Aerodynamic (Project), 1985(est.) Peugeot PY10FC
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 150 Post(s)
Likes: 0
Liked 34 Times
in
27 Posts
One is more likely to run into a Sasquatch lounging in their backyard before finding damage to the wheels of their hanging bikes......
Why won't this pointless concern ever die??........
Chombi
Why won't this pointless concern ever die??........
Chombi
#15
incazzare.
Because there will always be new cyclists. It's no biggie, it's an easy one to dispel.
__________________
1964 JRJ (Bob Jackson), 1973 Wes Mason, 1974 Raleigh Gran Sport, 1986 Schwinn High Sierra, 2000ish Colian (Colin Laing), 2011 Dick Chafe, 2013 Velo Orange Pass Hunter
1964 JRJ (Bob Jackson), 1973 Wes Mason, 1974 Raleigh Gran Sport, 1986 Schwinn High Sierra, 2000ish Colian (Colin Laing), 2011 Dick Chafe, 2013 Velo Orange Pass Hunter
#16
multimodal commuter
Join Date: Nov 2006
Location: NJ, NYC, LI
Posts: 19,808
Bikes: 1940s Fothergill, 1959 Allegro Special, 1963? Claud Butler Olympic Sprint, Lambert 'Clubman', 1974 Fuji "the Ace", 1976 Holdsworth 650b conversion rando bike, 1983 Trek 720 tourer, 1984 Counterpoint Opus II, 1993 Basso Gap, 2010 Downtube 8h, and...
Mentioned: 584 Post(s)
Tagged: 0 Thread(s)
Quoted: 1908 Post(s)
Liked 574 Times
in
339 Posts
I'm wondering what the poor bike did to deserve capital punishment.
#17
Thrifty Bill
Join Date: Jan 2008
Location: Mountains of Western NC
Posts: 23,525
Bikes: 86 Katakura Silk, 87 Prologue X2, 88 Cimarron LE, 1975 Sekai 4000 Professional, 73 Paramount, plus more
Mentioned: 96 Post(s)
Tagged: 0 Thread(s)
Quoted: 1236 Post(s)
Liked 964 Times
in
628 Posts
+1,285 Lets see, that wheel normally sees 100 pounds or more of loading when you are riding it. So having it support 40 pounds damages it how?
#18
Senior Member
Join Date: Apr 2005
Location: Wherever
Posts: 16,748
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 556 Post(s)
Likes: 0
Liked 132 Times
in
78 Posts
I read somewhere, long ago, the forces generated up through the fork and into the headset bearings. Can't remember what it was, but the figure astounded me. A spoked wheel can take much.
#19
Senior Member
Thread Starter
Join Date: Oct 2008
Location: Akron, OH
Posts: 430
Bikes: 2008 Seven Axiom Steel, 1984 Colnago Nuovo Mexico, 2008 Cervelo P2C, 2000 Trek Multitrack 7200
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 17 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
So you've convinced me. It stays on the hook until next spring.
TSAPP
TSAPP
#20
Banned.
Join Date: Dec 2007
Posts: 27,199
Mentioned: 34 Post(s)
Tagged: 1 Thread(s)
Quoted: 378 Post(s)
Liked 1,409 Times
in
909 Posts
Then, we watched on in good humor as a carbon bike came down the road and exploded.
#21
incazzare.
You can't see it, but there's a carbon bike in the middle, just there.
__________________
1964 JRJ (Bob Jackson), 1973 Wes Mason, 1974 Raleigh Gran Sport, 1986 Schwinn High Sierra, 2000ish Colian (Colin Laing), 2011 Dick Chafe, 2013 Velo Orange Pass Hunter
1964 JRJ (Bob Jackson), 1973 Wes Mason, 1974 Raleigh Gran Sport, 1986 Schwinn High Sierra, 2000ish Colian (Colin Laing), 2011 Dick Chafe, 2013 Velo Orange Pass Hunter
#22
You gonna eat that?
And right now my DL-1 is hanging in my garage on hooks.
#23
Senior Member
Join Date: Jun 2008
Location: Louisville, KY
Posts: 13,445
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 4234 Post(s)
Liked 2,949 Times
in
1,808 Posts
I'd imagine that it's the material of the hook that's important. Don't go scratching things up with a cheap rusty hook.
__________________
Bikes: 1996 Eddy Merckx Titanium EX, 1989/90 Colnago Super(issimo?) Piu(?),1990 Concorde Aquila(hit by car while riding), others in build queue "when I get the time"
Bikes: 1996 Eddy Merckx Titanium EX, 1989/90 Colnago Super(issimo?) Piu(?),
#24
Senior Member
Join Date: Jul 2009
Posts: 11,128
Bikes: 1986 Alan Record Carbonio, 1985 Vitus Plus Carbone 7, 1984 Peugeot PSV, 1972 Line Seeker, 1986(est.) Medici Aerodynamic (Project), 1985(est.) Peugeot PY10FC
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 150 Post(s)
Likes: 0
Liked 34 Times
in
27 Posts
Chombi
#25
Motorcycle RoadRacer
Join Date: May 2010
Posts: 3,826
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 4 Times
in
4 Posts
I have my bikes hung up, but they are not by the wheel. I have them on the wall supended by two hooks (for each bike) that come out and cradles the frame. The bikes are horizontal too.