Campy bottom bracket question
#1
Senior Member
Thread Starter
Campy bottom bracket question
Im wanting to swap my victory cranks for nuovo record. Will my current bottom bracket work with the nuovo record cranks? Thanks
__________________
Semper fi
Semper fi
#2
Senior Member
Check velobase for spindle width on the Victory BB. Record used 113mm and 115.5mm, pre and post CPSC respectively. Also Record spindles are offset something like 5mm to the DS, Victory may be symmetrical. Anyway, Velobase has all the answers you need, just do a little digging.
#3
Cat 6
Join Date: Dec 2007
Location: Mountain Brook, AL
Posts: 7,482
Mentioned: 27 Post(s)
Tagged: 0 Thread(s)
Quoted: 500 Post(s)
Liked 183 Times
in
118 Posts
IIRC Victory spindles were 109mm, so I'd think your chainline will be in too far.
__________________
72 Frejus (for sale), Holdsworth Record (for sale), special CNC & Gitane Interclub / 74 Italvega NR (for sale) / c80 French / 82 Raleigh Intl MkII f&f (for sale)/ 83 Trek 620 (for sale)/ 84 Bruce Gordon Chinook (for sale)/ 85 Ron Cooper / 87 Centurion IM MV (for sale) / 03 Casati Dardo / 08 BF IRO / 09 Dogma FPX / 09 Giant TCX0 / 10 Vassago Fisticuff
72 Frejus (for sale), Holdsworth Record (for sale), special CNC & Gitane Interclub / 74 Italvega NR (for sale) / c80 French / 82 Raleigh Intl MkII f&f (for sale)/ 83 Trek 620 (for sale)/ 84 Bruce Gordon Chinook (for sale)/ 85 Ron Cooper / 87 Centurion IM MV (for sale) / 03 Casati Dardo / 08 BF IRO / 09 Dogma FPX / 09 Giant TCX0 / 10 Vassago Fisticuff
#4
Stop reading my posts!
Join Date: Sep 2004
Posts: 12,574
Mentioned: 89 Post(s)
Tagged: 0 Thread(s)
Quoted: 1440 Post(s)
Liked 1,058 Times
in
783 Posts
taper might match but chainline probably will not.
Victory spindle is symmetrical; NR spindle is either 1mm longer on RH side (with thick cup) or 2mm longer (with thin cup)
Last edited by unworthy1; 06-07-12 at 03:38 PM.
#5
Senior Member
Thread Starter
Thanks.
__________________
Semper fi
Semper fi