Show Your Vintage MTB Drop Bar Conversions
11-27-13, 12:01 PM
#2551
Gaspipe Pilot
Join Date: May 2008
Location: Feeding on the bottom.
Posts: 200
Bikes: Lots of bikes for lots of different kinds of riding....
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Threads like this are often a great source of ideas. I thought it would be useful to post a link to a similar thread regarding MTB touring conversions (from the touring forum) as there is some content overlap. It's cool how people are re-purposing these great old frames and I look forward to seeing more.
11-27-13, 03:23 PM
#2552
Senior Member
Join Date: Jan 2012
Location: Forksbent, MN
Posts: 3,271
Bikes: Yes
Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 301 Post(s)
Likes: 0
Liked 15 Times
in
15 Posts
Made a few changes to the Croll including Midge bars and new cantis.
The midge bars have some real flaws, the main almost inexcusable one being that they are painted instead of anodized, meaning if you don't want your controls to slither around on the bars you need to take the paint off (I did so with a channel lock wrench) where they are mounted before proceeding. They also don't hold all that well in the stem unless they are really torqued in, and even then I'm doubtful they will stay come some real rough stuff. The drops on the midges are way too short, but still nice for descending. I rode them on the hoods when climbing or on the flats, and in the drops on the descents. Fairly well designed (minus the paint and too short drops) for the dirt. Maybe I can find some sort of champagne cork bar end to make them more tolerable on the road.
The above said, they'll probably stay on the bike for now as they are better than the road bars I was using. Still searching for the utopian drop bar though
The midge bars have some real flaws, the main almost inexcusable one being that they are painted instead of anodized, meaning if you don't want your controls to slither around on the bars you need to take the paint off (I did so with a channel lock wrench) where they are mounted before proceeding. They also don't hold all that well in the stem unless they are really torqued in, and even then I'm doubtful they will stay come some real rough stuff. The drops on the midges are way too short, but still nice for descending. I rode them on the hoods when climbing or on the flats, and in the drops on the descents. Fairly well designed (minus the paint and too short drops) for the dirt. Maybe I can find some sort of champagne cork bar end to make them more tolerable on the road.
The above said, they'll probably stay on the bike for now as they are better than the road bars I was using. Still searching for the utopian drop bar though
11-27-13, 03:51 PM
#2553
Senior Member
Join Date: Jul 2004
Location: Yukon, Canada
Posts: 8,773
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 108 Post(s)
Likes: 0
Liked 15 Times
in
13 Posts
Originally Posted by Chrome Molly
Made a few changes to the Croll including Midge bars and new cantis.
The midge bars have some real flaws, the main almost inexcusable one being that they are painted instead of anodized, meaning if you don't want your controls to slither around on the bars you need to take the paint off (I did so with a channel lock wrench) where they are mounted before proceeding. They also don't hold all that well in the stem unless they are really torqued in, and even then I'm doubtful they will stay come some real rough stuff. The drops on the midges are way too short, but still nice for descending. I rode them on the hoods when climbing or on the flats, and in the drops on the descents. Fairly well designed (minus the paint and too short drops) for the dirt. Maybe I can find some sort of champagne cork bar end to make them more tolerable on the road.
The above said, they'll probably stay on the bike for now as they are better than the road bars I was using. Still searching for the utopian drop bar though
The midge bars have some real flaws, the main almost inexcusable one being that they are painted instead of anodized, meaning if you don't want your controls to slither around on the bars you need to take the paint off (I did so with a channel lock wrench) where they are mounted before proceeding. They also don't hold all that well in the stem unless they are really torqued in, and even then I'm doubtful they will stay come some real rough stuff. The drops on the midges are way too short, but still nice for descending. I rode them on the hoods when climbing or on the flats, and in the drops on the descents. Fairly well designed (minus the paint and too short drops) for the dirt. Maybe I can find some sort of champagne cork bar end to make them more tolerable on the road.
The above said, they'll probably stay on the bike for now as they are better than the road bars I was using. Still searching for the utopian drop bar though
__________________
1 Super Record bike, 1 Nuovo Record bike, 1 Pista, 1 Road, 1 Cyclocross/Allrounder, 1 MTB, 1 Touring, 1 Fixed gear
1 Super Record bike, 1 Nuovo Record bike, 1 Pista, 1 Road, 1 Cyclocross/Allrounder, 1 MTB, 1 Touring, 1 Fixed gear
11-27-13, 05:24 PM
#2554
Senior Member
Join Date: Jul 2006
Location: STP
Posts: 15,212
Mentioned: 73 Post(s)
Tagged: 0 Thread(s)
Quoted: 814 Post(s)
Liked 237 Times
in
135 Posts
Originally Posted by cyclotoine
That is HOT! I am pretty sure the utopian bar is the woodchipper, though I haven't sucked it up and shelled out for one yet...
https://g-tedproductions.blogspot.com...rs-update.html
11-27-13, 05:26 PM
#2555
Senior Member
Join Date: Jul 2006
Location: STP
Posts: 15,212
Mentioned: 73 Post(s)
Tagged: 0 Thread(s)
Quoted: 814 Post(s)
Liked 237 Times
in
135 Posts
Originally Posted by Chrome Molly
Made a few changes to the Croll including Midge bars and new cantis.
The midge bars have some real flaws, the main almost inexcusable one being that they are painted instead of anodized, meaning if you don't want your controls to slither around on the bars you need to take the paint off (I did so with a channel lock wrench) where they are mounted before proceeding. They also don't hold all that well in the stem unless they are really torqued in, and even then I'm doubtful they will stay come some real rough stuff. The drops on the midges are way too short, but still nice for descending. I rode them on the hoods when climbing or on the flats, and in the drops on the descents. Fairly well designed (minus the paint and too short drops) for the dirt. Maybe I can find some sort of champagne cork bar end to make them more tolerable on the road.
The above said, they'll probably stay on the bike for now as they are better than the road bars I was using. Still searching for the utopian drop bar though
The midge bars have some real flaws, the main almost inexcusable one being that they are painted instead of anodized, meaning if you don't want your controls to slither around on the bars you need to take the paint off (I did so with a channel lock wrench) where they are mounted before proceeding. They also don't hold all that well in the stem unless they are really torqued in, and even then I'm doubtful they will stay come some real rough stuff. The drops on the midges are way too short, but still nice for descending. I rode them on the hoods when climbing or on the flats, and in the drops on the descents. Fairly well designed (minus the paint and too short drops) for the dirt. Maybe I can find some sort of champagne cork bar end to make them more tolerable on the road.
The above said, they'll probably stay on the bike for now as they are better than the road bars I was using. Still searching for the utopian drop bar though
Top notch.
I'll be doing a single speed Park Pre build that you might like as well.
Collecting parts atm.
11-27-13, 05:33 PM
#2556
Senior Member
Join Date: Jul 2004
Location: Yukon, Canada
Posts: 8,773
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 108 Post(s)
Likes: 0
Liked 15 Times
in
13 Posts
Originally Posted by gomango
I rode Ragley Luxy bars and they are outstanding.
https://g-tedproductions.blogspot.com...rs-update.html
https://g-tedproductions.blogspot.com...rs-update.html
__________________
1 Super Record bike, 1 Nuovo Record bike, 1 Pista, 1 Road, 1 Cyclocross/Allrounder, 1 MTB, 1 Touring, 1 Fixed gear
1 Super Record bike, 1 Nuovo Record bike, 1 Pista, 1 Road, 1 Cyclocross/Allrounder, 1 MTB, 1 Touring, 1 Fixed gear
11-27-13, 05:45 PM
#2557
Senior Member
Join Date: Jul 2006
Location: STP
Posts: 15,212
Mentioned: 73 Post(s)
Tagged: 0 Thread(s)
Quoted: 814 Post(s)
Liked 237 Times
in
135 Posts
Originally Posted by cyclotoine
Possibly out of production?
I bought my pair on CL from Des Moines last summer for $15.
Well worth seeking. Imho
11-27-13, 05:52 PM
#2558
Senior Member
Join Date: Jan 2012
Location: Indianapolis, IN
Posts: 313
Bikes: AR Cycles Randonneuse, Raleigh Competition, VeloOrange Piolet Prototype, LeJeune Townie, Motobecane Campeur, AR Cycles roadie, Rickert track, Cannondale SM 500, '55 Schwinn
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Originally Posted by cyclotoine
I like all the moc-ups.. and if you're not going to use that black LX derailleur, you know who to send it too 
I also like the moustache set up with the black flite (what was the original saddle btw? looks way older than the bike)
I also like the moustache set up with the black flite (what was the original saddle btw? looks way older than the bike)
Originally Posted by 7speed
In my experience with moustache bars (I like them; I've been using them for a few years now), they work best on a stem like the red one. I also like non-aero levers for this use. YMMV, have fun!
11-29-13, 01:14 PM
#2560
Spin Forest! Spin!
Join Date: Sep 2007
Location: Arrid Zone-a
Posts: 5,964
Bikes: I used to have many. And I Will again.
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 8 Times
in
8 Posts
I need of some advice and help from the experts here....
I was test-fitting parts onto Giant Smurf this morning and discovered a problem that stopped its build in its tracks!
The frame needs a top-pull, top-mount FD. I had a vintage Deore (DX) endless band type that I thought was ideal for the job. I found out it's for a 28.6mm seat tube, and I have a 31.8mm one...with the end ovalized at the BB. Nothing currently on the market will work....they are all bottom mount style. And an E-type won't work without buying a new cartridge BB. I want to use the Sugino crank with a 42t outer ring, as pictured.
Does anyone know of a vintage model triple FD that will work with this frame and crank?
I was test-fitting parts onto Giant Smurf this morning and discovered a problem that stopped its build in its tracks!
The frame needs a top-pull, top-mount FD. I had a vintage Deore (DX) endless band type that I thought was ideal for the job. I found out it's for a 28.6mm seat tube, and I have a 31.8mm one...with the end ovalized at the BB. Nothing currently on the market will work....they are all bottom mount style. And an E-type won't work without buying a new cartridge BB. I want to use the Sugino crank with a 42t outer ring, as pictured.
Does anyone know of a vintage model triple FD that will work with this frame and crank?
11-29-13, 01:29 PM
#2561
Senior Member
Join Date: Nov 2009
Posts: 7,107
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Originally Posted by Chrome Molly
Made a few changes to the Croll including Midge bars and new cantis.
The midge bars have some real flaws, the main almost inexcusable one being that they are painted instead of anodized, meaning if you don't want your controls to slither around on the bars you need to take the paint off (I did so with a channel lock wrench) where they are mounted before proceeding. They also don't hold all that well in the stem unless they are really torqued in, and even then I'm doubtful they will stay come some real rough stuff. The drops on the midges are way too short, but still nice for descending. I rode them on the hoods when climbing or on the flats, and in the drops on the descents. Fairly well designed (minus the paint and too short drops) for the dirt. Maybe I can find some sort of champagne cork bar end to make them more tolerable on the road.
The above said, they'll probably stay on the bike for now as they are better than the road bars I was using. Still searching for the utopian drop bar though
The midge bars have some real flaws, the main almost inexcusable one being that they are painted instead of anodized, meaning if you don't want your controls to slither around on the bars you need to take the paint off (I did so with a channel lock wrench) where they are mounted before proceeding. They also don't hold all that well in the stem unless they are really torqued in, and even then I'm doubtful they will stay come some real rough stuff. The drops on the midges are way too short, but still nice for descending. I rode them on the hoods when climbing or on the flats, and in the drops on the descents. Fairly well designed (minus the paint and too short drops) for the dirt. Maybe I can find some sort of champagne cork bar end to make them more tolerable on the road.
The above said, they'll probably stay on the bike for now as they are better than the road bars I was using. Still searching for the utopian drop bar though
11-29-13, 01:59 PM
#2562
Senior Member
Join Date: Jan 2012
Location: Forksbent, MN
Posts: 3,271
Bikes: Yes
Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 301 Post(s)
Likes: 0
Liked 15 Times
in
15 Posts
Reach to the thumbs is fine, maybe even a little easier than a road bar as the controls are turned a bit making the paddles lower. My only complaint with them now that they're on the bike is that the drops are too short for regular trail riding (but great on descents). The WTB dirt drop looks like a nice bar to me. Woodchipper maybe even better if you spend lots of time on the road.
11-29-13, 02:04 PM
#2563
Senior Member
Join Date: Jul 2004
Location: Yukon, Canada
Posts: 8,773
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 108 Post(s)
Likes: 0
Liked 15 Times
in
13 Posts
Originally Posted by WNG
I need of some advice and help from the experts here....
I was test-fitting parts onto Giant Smurf this morning and discovered a problem that stopped its build in its tracks!
The frame needs a top-pull, top-mount FD. I had a vintage Deore (DX) endless band type that I thought was ideal for the job. I found out it's for a 28.6mm seat tube, and I have a 31.8mm one...with the end ovalized at the BB. Nothing currently on the market will work....they are all bottom mount style. And an E-type won't work without buying a new cartridge BB. I want to use the Sugino crank with a 42t outer ring, as pictured.
Does anyone know of a vintage model triple FD that will work with this frame and crank?
I was test-fitting parts onto Giant Smurf this morning and discovered a problem that stopped its build in its tracks!
The frame needs a top-pull, top-mount FD. I had a vintage Deore (DX) endless band type that I thought was ideal for the job. I found out it's for a 28.6mm seat tube, and I have a 31.8mm one...with the end ovalized at the BB. Nothing currently on the market will work....they are all bottom mount style. And an E-type won't work without buying a new cartridge BB. I want to use the Sugino crank with a 42t outer ring, as pictured.
Does anyone know of a vintage model triple FD that will work with this frame and crank?
__________________
1 Super Record bike, 1 Nuovo Record bike, 1 Pista, 1 Road, 1 Cyclocross/Allrounder, 1 MTB, 1 Touring, 1 Fixed gear
1 Super Record bike, 1 Nuovo Record bike, 1 Pista, 1 Road, 1 Cyclocross/Allrounder, 1 MTB, 1 Touring, 1 Fixed gear
11-29-13, 02:22 PM
#2564
Senior Member
Join Date: Sep 2010
Location: Oregon City, OR
Posts: 1,617
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 95 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
Originally Posted by WNG
I need of some advice and help from the experts here....
I was test-fitting parts onto Giant Smurf this morning and discovered a problem that stopped its build in its tracks!
The frame needs a top-pull, top-mount FD. I had a vintage Deore (DX) endless band type that I thought was ideal for the job. I found out it's for a 28.6mm seat tube, and I have a 31.8mm one...with the end ovalized at the BB. Nothing currently on the market will work....they are all bottom mount style. And an E-type won't work without buying a new cartridge BB. I want to use the Sugino crank with a 42t outer ring, as pictured.
Does anyone know of a vintage model triple FD that will work with this frame and crank?
I was test-fitting parts onto Giant Smurf this morning and discovered a problem that stopped its build in its tracks!
The frame needs a top-pull, top-mount FD. I had a vintage Deore (DX) endless band type that I thought was ideal for the job. I found out it's for a 28.6mm seat tube, and I have a 31.8mm one...with the end ovalized at the BB. Nothing currently on the market will work....they are all bottom mount style. And an E-type won't work without buying a new cartridge BB. I want to use the Sugino crank with a 42t outer ring, as pictured.
Does anyone know of a vintage model triple FD that will work with this frame and crank?
Granted, this is an expensive version, but I've got an old Altus version on my 89 hardrock, so they are out there.
11-29-13, 03:00 PM
#2565
Spin Forest! Spin!
Join Date: Sep 2007
Location: Arrid Zone-a
Posts: 5,964
Bikes: I used to have many. And I Will again.
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 8 Times
in
8 Posts
Originally Posted by cyclotoine
Yeah most shimano derailleur in the mid 1990s through to early 2000s and even later. I think I have a very newish (9 speed anyway) LX that is 34.9 and top pull, high mount. I would be willing to let this one go and I have the shim to make it 31.8... Is there no pulley mount on your frame? Most of mine have the pulley mount though I would prefer to use top pulls and bypass the pulley.
The Giant frame has no pulley, it was using some top pull model. But I was only provided the frame.
I'll see what I can find first locally. Just need to know what to look for with the right cage profile. If there isn't one that can reach down low enough for a 42t ring, then I'll have to swap over to a larger Deore DX crank. But the Sugino looks better and more matched to the riding terrain I want to use the bike on....tough gravel trails, and some single-track mtb trails that are local to me (Hawes Trail).
11-29-13, 03:03 PM
#2566
Spin Forest! Spin!
Join Date: Sep 2007
Location: Arrid Zone-a
Posts: 5,964
Bikes: I used to have many. And I Will again.
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 8 Times
in
8 Posts
Originally Posted by JReade
Have you thought about something like this?
Granted, this is an expensive version, but I've got an old Altus version on my 89 hardrock, so they are out there.
Granted, this is an expensive version, but I've got an old Altus version on my 89 hardrock, so they are out there.
11-29-13, 03:20 PM
#2567
Senior Member
Join Date: Jul 2004
Location: Yukon, Canada
Posts: 8,773
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 108 Post(s)
Likes: 0
Liked 15 Times
in
13 Posts
Originally Posted by WNG
Thanks Cyclotoine. I'll keep your offer as a last resort. Knowing how it was to ship internationally between Canada/USA.
The Giant frame has no pulley, it was using some top pull model. But I was only provided the frame.
I'll see what I can find first locally. Just need to know what to look for with the right cage profile. If there isn't one that can reach down low enough for a 42t ring, then I'll have to swap over to a larger Deore DX crank. But the Sugino looks better and more matched to the riding terrain I want to use the bike on....tough gravel trails, and some single-track mtb trails that are local to me (Hawes Trail).
The Giant frame has no pulley, it was using some top pull model. But I was only provided the frame.
I'll see what I can find first locally. Just need to know what to look for with the right cage profile. If there isn't one that can reach down low enough for a 42t ring, then I'll have to swap over to a larger Deore DX crank. But the Sugino looks better and more matched to the riding terrain I want to use the bike on....tough gravel trails, and some single-track mtb trails that are local to me (Hawes Trail).
https://www.ebay.com/itm/SHIMANO-ALIV...-/331076613971
__________________
1 Super Record bike, 1 Nuovo Record bike, 1 Pista, 1 Road, 1 Cyclocross/Allrounder, 1 MTB, 1 Touring, 1 Fixed gear
1 Super Record bike, 1 Nuovo Record bike, 1 Pista, 1 Road, 1 Cyclocross/Allrounder, 1 MTB, 1 Touring, 1 Fixed gear
11-29-13, 03:28 PM
#2568
Senior Member
Join Date: Jul 2006
Location: STP
Posts: 15,212
Mentioned: 73 Post(s)
Tagged: 0 Thread(s)
Quoted: 814 Post(s)
Liked 237 Times
in
135 Posts
Originally Posted by Chrome Molly
Reach to the thumbs is fine, maybe even a little easier than a road bar as the controls are turned a bit making the paddles lower. My only complaint with them now that they're on the bike is that the drops are too short for regular trail riding (but great on descents). The WTB dirt drop looks like a nice bar to me. Woodchipper maybe even better if you spend lots of time on the road.
I often ride to my off road destinations on our city streets. I like how they can be ridden in an upright position.
Plenty of hand positions and heads up visibility.
11-29-13, 03:57 PM
#2569
Spin Forest! Spin!
Join Date: Sep 2007
Location: Arrid Zone-a
Posts: 5,964
Bikes: I used to have many. And I Will again.
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 8 Times
in
8 Posts
Originally Posted by cyclotoine
I decided to have a look around. They still make derailleur that will do the job and inexpensive..
https://www.ebay.com/itm/SHIMANO-ALIV...-/331076613971
https://www.ebay.com/itm/SHIMANO-ALIV...-/331076613971
Ah NOS still available on ebay! Cool, this one is the right profile too.
12-04-13, 09:50 PM
#2570
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,079
Bikes: A bunch of old bikes and a few new ones
Mentioned: 174 Post(s)
Tagged: 0 Thread(s)
Quoted: 5710 Post(s)
Liked 3,001 Times
in
1,835 Posts
Originally Posted by ThermionicScott
Woo-hoo, another chance to post my Diamondback!
I'm pretty happy with the conversion overall, but I would like to find some bars with more reach, as I feel a little cramped when in the drops.
I'm pretty happy with the conversion overall, but I would like to find some bars with more reach, as I feel a little cramped when in the drops.
12-04-13, 10:49 PM
#2571
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,347
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 97 Post(s)
Tagged: 0 Thread(s)
Quoted: 3748 Post(s)
Liked 2,308 Times
in
1,447 Posts
Originally Posted by bikemig
Great looking build. I'm in the process of building one as well but I think I'm going to have exactly the same problem which is that I'll be too cramped in the drops. I'm getting a saddle with a bit longer rails which will help some; I'm probably going to get the selle anatomica nsx.
Here's a borderline-salacious comparison shot of the SR Randonneur bars and the VOs, showing how much reach I gained:
__________________
RUSA #7498
Originally Posted by chandltp
There's no such thing as too far.. just lack of time
Originally Posted by noglider
People in this forum are not typical.
Last edited by ThermionicScott; 12-04-13 at 10:55 PM.
12-04-13, 10:53 PM
#2572
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,079
Bikes: A bunch of old bikes and a few new ones
Mentioned: 174 Post(s)
Tagged: 0 Thread(s)
Quoted: 5710 Post(s)
Liked 3,001 Times
in
1,835 Posts
Originally Posted by ThermionicScott
Thanks, Mig -- you really dug to find this one! This was before I discovered the VO Rando bars I mentioned in your other thread.
12-05-13, 11:26 AM
#2573
Senior Member
Join Date: Jan 2008
Location: North Georgia
Posts: 272
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
This is a 1986 Stumpjumper frame I recently acquired. The original orange paint had been oversprayed and looked pretty bad. Had it stripped and powder coated in Candy Orange by a local outfit, Creative Candy in Dawsonville, Georgia. The base coat is silver with some metal flake added. The frame really pops in direct light. Before powder coating, I had Seth Snyder, a local frame and wheel builder, check frame alignment and braze posts on the downtube for the 105 shifters I will use. The last photo shows some of the parts; new, NOS and used already acquired for the build. Look forward to showing pictures of the completed all rounder sometime in the spring.
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG] [IMG]
[/IMG][IMG]
[/IMG]
12-05-13, 02:11 PM
#2574
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,347
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 97 Post(s)
Tagged: 0 Thread(s)
Quoted: 3748 Post(s)
Liked 2,308 Times
in
1,447 Posts
Originally Posted by kehomer
This is a 1986 Stumpjumper frame I recently acquired. The original orange paint had been oversprayed and looked pretty bad. Had it stripped and powder coated in Candy Orange by a local outfit, Creative Candy in Dawsonville, Georgia. The base coat is silver with some metal flake added. The frame really pops in direct light. Before powder coating, I had Seth Snyder, a local frame and wheel builder, check frame alignment and braze posts on the downtube for the 105 shifters I will use. The last photo shows some of the parts; new, NOS and used already acquired for the build. Look forward to showing pictures of the completed all rounder sometime in the spring.
__________________
RUSA #7498
Originally Posted by chandltp
There's no such thing as too far.. just lack of time
Originally Posted by noglider
People in this forum are not typical.
