![]() |
Aluminum or steel frame?
I have a couple of vintage Raleighs that I have posted questions about here before.
I got the Tri Lite tuned up and have been riding it. I also have a Grand Prix that I need to get cleaned up. My wife wants to ride on the road with me. The Tri Lite is an aluminum frame and the Grand Prix is steel. I am 54 years old so I won't be doing anything extreme, but I am also too big for my own good- that's one thing I hope to cure with cycling. Which frame- aluminum or steel, would better stand up to a heavy rider? Both frames are about the same size so either will fit us. Jim |
Paper or plastic??.....Just kidding...
Steel would generally be a more comfortable ride, so that could make it you first choice. As for which one is more durable, As you noted,you won't be riding the aluminum frame so hard that you will be able to kill it, so I wouldn't worry about which one will last longer. The two frame will most likely outlive most of us here.....including you. Chombi |
Aluminum frames tend to be more rigid than steel, not stronger, just stiffer. So if you want some comfort, I'd let your bride pilot the Technium.
|
pretty sure you're gonna find most people in this forum will say steel.. i like steel..
|
Jim, It really isn't going to make any real difference which frame you choose. Pick the one with the stronger wheelset or let your wife choose which she wants to ride.
Brad |
I agree with bradtx.
Also, if you're over about 170 lbs, inflate your tires ABOVE the recommended maximum pressure. This will help prevent your rims from getting dented. |
Quote:
Over 170? I haven't been 170 since I was a freshman in high school. I used to lift weights, and at 54 I am not even close to being as solid as I was but I can still throw around a lot of weight. I am 6' and 230#. That is why I was worrying about the frame. Jim |
Quote:
First: Don't listen to the man with the vintage mustache. :p Over inflate as to not dent rims!?! :roflmao2: Come now Tom! I was running my 23mm Gatorskins about 10lbs under the recommended 110psi on our Long Island ride a few weeks ago. Who flatted? Welterweight Neal! I was easily the heaviest guy on the ride! Second: Guys of our heft tend to flex steel frames a lot more than guys like Tom. ;) A stiff steel frame works just fine for me, but it does need to be nice and stiff. I think this is why I like the way old Schwinn Super Sport and Sport Tourer fillet brazed frames ride. My Paramounts are also on the stiff side, but do flex more than the fillet brazed frames. I own a 1982 Raliegh Superbe I keep in TN with a nephew. It flexes a lot more and I like the ride a lot less (open for offers). Finally: I like the ride quality of my Cannondales. I tend to ride slightly faster on them when compared to the Schwinns over the same route. One Paramount is the same weight, the other Paramount is 2lbs heavier, and the fillet brazed Schwinns are at least 6-8lbs heaver. I believe the stiffness is the main factor. Quote:
http://i125.photobucket.com/albums/p...Mar172011C.jpg http://i125.photobucket.com/albums/p...Mar172011B.jpg |
Depends on the bike . The Technium Raleighs, in my experience, were pretty comfy for aluminum bikes , although my Grand Prix is really comfortable for a steel bike . I've never owned a Tri-Lite, though . Put a few miles on each, and perhaps that will help your decision making process .
|
I think running under inflated tires is one of life's joys.
|
Interesting how oppinions vary. I have a 78 Gran Prix and consider it a little harsh compared to my 76 Super Sport. In fact the Super Sport is the one bike I get on and always notice the distinctive ride. It seems better damped (quieter) over rough roads than any other bike I own.
It could be the slightly wide 27 x 1 1/4 tires as much as anything. David S. |
Quote:
|
| All times are GMT -6. The time now is 11:35 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.