![]() |
touch up paint source
Other than going to an auto body paint place to try to match colors, anyone know of someone/somewhere that specializes in vintage bike paint? I only need some touch up bottles. Thanks,
Aaron in Indy |
|
Try looking for a hobby store that sells models (trains, planes & automobiles). My local hardware store has a large hobby section in the basement. :)
http://i850.photobucket.com/albums/a...e/IMG_4709.jpg |
Brilliant! Never woulda thought of model paint - I can't buy a couple dozen for the cost of paint matching. Thanks gents
|
|
Consider nail polish as well, if you have a red bike. I was able to get a nice red sparkily nail polish that matched the candy metal-flake on my Ciocc.
|
Gaucho777. You sure are spoiled. That has to be one of the most extensive model paint displays I've ever seen. Better than either my local hobby shop or specialty shop. My local ACE has nothing like that. You're lucky.
I recently used model paint, enamel, to touch up a bike, and paint the frame pump I put on it. Testor's is good stuff but probably not as durable as enamels meant for exterior use. You can always clear coat it though, and it's fine for small touch ups on bikes. |
The craft store chain Michael's has a pretty good selection of enamels in colors beyond the ususal Testors stuff.
|
Originally Posted by thinktubes
(Post 15119866)
Consider nail polish as well, if you have a red bike. I was able to get a nice red sparkily nail polish that matched the candy metal-flake on my Ciocc.
|
Originally Posted by thinktubes
(Post 15122295)
The craft store chain Michael's has a pretty good selection of enamels in colors beyond the ususal Testors stuff.
|
A word of caution: back in the days you went to a hobby store and bought enamels that came in flat, gloss, semi-gloss or gloss metallic. These days, the paint sections of hobby stores (at least here in Japan) are confusing. So, I usually check with the shop keeper before I purchase just to be sure. Nowadays there are enamels, water-based acrylics and lacquers. When I do touch ups, I want the enamels — paint that is thinned with some sort of aromatic.
Recently, I needed some metallic candy apple red and could not find any. When I was a kid, model hot rods were a rage, and candy apple red was all over the place. |
Originally Posted by thinktubes
(Post 15119866)
Consider nail polish as well, if you have a red bike. I was able to get a nice red sparkily nail polish that matched the candy metal-flake on my Ciocc.
http://i1211.photobucket.com/albums/...2/DSC00587.jpg |
Doesn't that nail polish wear down quick? I can't imagine it lasting very long...
|
Originally Posted by Lenton58
(Post 15124170)
A word of caution: back in the days you went to a hobby store and bought enamels that came in flat, gloss, semi-gloss or gloss metallic. These days, the paint sections of hobby stores (at least here in Japan) are confusing. So, I usually check with the shop keeper before I purchase just to be sure. Nowadays there are enamels, water-based acrylics and lacquers. When I do touch ups, I want the enamels — paint that is thinned with some sort of aromatic.
Recently, I needed some metallic candy apple red and could not find any. When I was a kid, model hot rods were a rage, and candy apple red was all over the place. |
That looks like a sweet hobby shop Gaucho! For some reason, I have always had a soft spot for them since I was a kid; build lots of model airplanes mostly. Wish we still had a cool one around here!
|
Originally Posted by zukahn1
(Post 15124244)
+1 I have touched up several bikes using nail polish you may look a little strange but go to a discount beauty supply store and you can find paint in almost any color cheap if you don't need a lot. I touched up the paint on this clunker for $5 and sold it for $200.
That was before I discovered these guys: http://www.hiroboy.com/catalog/produ...oducts_id=1250 |
3 Attachment(s)
I love auto touch up, I took the clamp on stand of the Nishiki (which is really heading to the keep pile) and used GM Dark Cherry Red to touch up the damage, one side already had a coat before I thought to grab the camera. In person the it is very very slightly lighter than the original, but this happens when you just take a guess without the bike there.
http://bikeforums.net/attachment.php...hmentid=292085http://bikeforums.net/attachment.php...hmentid=292087 |
The great thing about these guys is that they sell RAL-coded hobby paints in small quantities. If you know the RAL code of your bike's paint, you can get an exact match.
|
Originally Posted by DIMcyclist
(Post 15127338)
The great thing about these guys is that they sell RAL-coded hobby paints in small quantities. If you know the RAL code of your bike's paint, you can get an exact match.
|
I seriously doubt it. Old cars, maybe, but not vintage bicycles. That is a nice selection of colors though, DIMcyclist. I could find no info on their website as to what kind of paint it is. No mention of what to thin it with. I presume it's enamel? Also, what does it cost to ship from the UK? Thx.
|
I assumed it was enamel, but I haven't actually checked.
The neat thing about RAL codes is that most of them have Pantone equivalents, so there's further matching you can do there, and if you have your frame custom painted, repainted, or powder coated, the new paint will almost always have an RAL or Pantone code. If you have a keen eye, sometimes you can tell by sight. For example, last week I locked up my newly powder coated Trek right next to a brand new Disc Trucker and noticed that Surly's current "Super Dark Green" is- exactly- RAL 6012 'Black Green': the same shade of Royal Mail Green that I'd just had my Trek painted. |
| All times are GMT -6. The time now is 07:37 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.