How long does it take before I should consider a new seat?
#1
Member
Thread Starter
Join Date: Mar 2011
Posts: 36
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
How long does it take before I should consider a new seat?
So I just set up my new commuter bike and I've ridden about 20 miles. I know that's not enough time to break in the seat, but seriously, it's bad. A trusted LBS tech said to wait two-four weeks before considering a new seat. Should I wait until my sit bones are used to the load before trying a new seat, or should I just go for it now?
I may end up doing half commutes in the mean time just to get my sit bones used to the weight.
I may end up doing half commutes in the mean time just to get my sit bones used to the weight.
#2
Banned.
Join Date: Dec 2005
Location: Upland Ca
Posts: 19,895
Bikes: Lemond Chambery/Cannondale R-900/Trek 8000 MTB/Burley Duet tandem
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 4 Times
in
3 Posts
I guess it would be fair to ask how much riding you have been doing recently (before the new commuter)?
After having my butt conditioned to riding, I can easliy do a 20 miler with no discomfort on a bad saddle.
If your butt is conditioned, I'd say give it 1000 miles of use. I've had saddles that I hated (Cannondle Coda) but ended up relaly liking it after a good breakin period. Terry FLy was great right out of the box but I had a ton of miles in the saddle already and my butt was well conditioned.
I say use it if you yourself don't have many miles on your butt. You might spend money then find it wasn't the seat. If you do have a few thousand miles under your belt, I agree, give the saddle a good 3-4 weeks before you ditch it.
Last edited by Mr. Beanz; 03-19-11 at 11:27 AM.
#3
Senior Member
Join Date: Mar 2008
Location: Binghamton, NY
Posts: 2,896
Bikes: Workcycles FR8, 2016 Jamis Coda Comp, 2008 Surly Long Haul Trucker
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 6 Times
in
5 Posts
Sometimes its not even the saddle. Do you have the saddle height correct? Is the tilt and fore/aft positioning correct?
Before getting a new saddle make adjustments. Also, give yourself some time to get used to the adjustments.
If you feel nothing is working, then look for a new saddle.
Before getting a new saddle make adjustments. Also, give yourself some time to get used to the adjustments.
If you feel nothing is working, then look for a new saddle.
#4
Senior Member
Join Date: Jul 2006
Location: Toronto (again) Ontario, Canada
Posts: 6,931
Bikes: Old Bike: 1975 Raleigh Delta, New Bike: 2004 Norco Bushpilot
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 5 Times
in
5 Posts
So I just set up my new commuter bike and I've ridden about 20 miles. I know that's not enough time to break in the seat, but seriously, it's bad. A trusted LBS tech said to wait two-four weeks before considering a new seat. Should I wait until my sit bones are used to the load before trying a new seat, or should I just go for it now?
I may end up doing half commutes in the mean time just to get my sit bones used to the weight.
I may end up doing half commutes in the mean time just to get my sit bones used to the weight.
sit on the saddle, in a natural position, and go for say 2 miles, now note where you sit bones are, your butt will always find the natural position, but you can sit in the right spot at the beginning, and notice a mile or two later, that your not sitting in the right spot. Say you find yourself sitting on the nose, this means the saddle is too far back, so take your wrench, and put the saddle forward, since we started half way back on the rails, move it half way between that and the back of the saddle, and do another 2 miles, still on the nose, move it back again, do another 2 miles. If you now find your too far the other way, then shift back half the distance. Once you have the saddle in the right spot, and still level, you can try tilting it a little to see if you can get it right. Often times, getting the saddle set right, will make it usable. If you find you can't move the saddle forward enough, then the top tube is too long, if you can't move the saddle back enough the top tube is too short.
Having said all this, some saddles just don't work for some riders, every body is different.
#5
Banned.
Join Date: Mar 2011
Posts: 1,095
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
i agree with the others, last year at this time i was new to cycling and 15 minutes on the bike was MAJOR Pain! It took me 3 solid weeks to get my butt conditioned and there were days where I really couldnt even ride cuz my ass hurt too much. I should add that I did not start with padded shorts either since i never had them as a kid. Once my butt got conditioned, I would easily do 20-40 mile rides without shorts but usually would wear them. I did find that making certain adjustments like saddle nose up and down did play a major role in comfort.
#6
Senior Member
Honestly, I don't really believe in the "break in" theory for saddles... or butts.
If you've never ridden a bike before you might give yourself 5-6 rides to get used to sitting on a saddle. When I'm evaluating a new saddle, I use shorts that I know work well for me and I set the new saddle at the same height as the old one. I ride around the block a few times to make sure the positioning is correct then take the saddle for a spin around my normal 30-mile training loop. Within the first 3-5 miles I can have the adjustment spot-on. At the end of the ride, if there's even the slightest hint of discomfort, I consider the saddle a reject. I used this method to pick my current saddle, which worked well when riding 60-90 miles/day for 8 days in a row down the Pacific Coast among other things...
If you've never ridden a bike before you might give yourself 5-6 rides to get used to sitting on a saddle. When I'm evaluating a new saddle, I use shorts that I know work well for me and I set the new saddle at the same height as the old one. I ride around the block a few times to make sure the positioning is correct then take the saddle for a spin around my normal 30-mile training loop. Within the first 3-5 miles I can have the adjustment spot-on. At the end of the ride, if there's even the slightest hint of discomfort, I consider the saddle a reject. I used this method to pick my current saddle, which worked well when riding 60-90 miles/day for 8 days in a row down the Pacific Coast among other things...
#7
Banned.
Join Date: Mar 2011
Posts: 1,095
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Honestly, I don't really believe in the "break in" theory for saddles... or butts.
If you've never ridden a bike before you might give yourself 5-6 rides to get used to sitting on a saddle. When I'm evaluating a new saddle, I use shorts that I know work well for me and I set the new saddle at the same height as the old one. I ride around the block a few times to make sure the positioning is correct then take the saddle for a spin around my normal 30-mile training loop. Within the first 3-5 miles I can have the adjustment spot-on. At the end of the ride, if there's even the slightest hint of discomfort, I consider the saddle a reject. I used this method to pick my current saddle, which worked well when riding 60-90 miles/day for 8 days in a row down the Pacific Coast among other things...
If you've never ridden a bike before you might give yourself 5-6 rides to get used to sitting on a saddle. When I'm evaluating a new saddle, I use shorts that I know work well for me and I set the new saddle at the same height as the old one. I ride around the block a few times to make sure the positioning is correct then take the saddle for a spin around my normal 30-mile training loop. Within the first 3-5 miles I can have the adjustment spot-on. At the end of the ride, if there's even the slightest hint of discomfort, I consider the saddle a reject. I used this method to pick my current saddle, which worked well when riding 60-90 miles/day for 8 days in a row down the Pacific Coast among other things...
perhaps if we are talking about people starting with very large saddles it's not an issue but my bike came with a regular old sadde like most road bikes do and my ass HURT like hell, believe that!
#8
Member
Thread Starter
Join Date: Mar 2011
Posts: 36
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
You guys were right. It took a few days of riding but the discomfort is getting significantly better. While I would not say my seat is comfortable, the bike is definitely ridable for 10 miles or so (with some old baggy mtb shorts).
I will probably still want another saddle at some point but I do concede that there is an adjustment period for your sit bones.
I will probably still want another saddle at some point but I do concede that there is an adjustment period for your sit bones.
#9
Humvee of bikes =Worksman
Join Date: May 2004
Posts: 5,362
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Likes: 0
Liked 6 Times
in
6 Posts
So I just set up my new commuter bike and I've ridden about 20 miles. I know that's not enough time to break in the seat, but seriously, it's bad. A trusted LBS tech said to wait two-four weeks before considering a new seat. Should I wait until my sit bones are used to the load before trying a new seat, or should I just go for it now?
I may end up doing half commutes in the mean time just to get my sit bones used to the weight.
I may end up doing half commutes in the mean time just to get my sit bones used to the weight.
Modern synthetic saddles won't break in since they are not organic.
__________________
My preferred bicycle brand is.......WORKSMAN CYCLES
I dislike clipless pedals on any city bike since I feel they are unsafe.
Originally Posted by krazygluon
Steel: nearly a thousand years of metallurgical development
Aluminum: barely a hundred, which one would you rather have under your butt at 30mph?
My preferred bicycle brand is.......WORKSMAN CYCLES
I dislike clipless pedals on any city bike since I feel they are unsafe.
Originally Posted by krazygluon
Steel: nearly a thousand years of metallurgical development
Aluminum: barely a hundred, which one would you rather have under your butt at 30mph?
Thread
Thread Starter
Forum
Replies
Last Post
jcinnb
Clydesdales/Athenas (200+ lb / 91+ kg)
4
08-09-10 07:21 AM