broken spokes! bad wheel?
#1
Member
Thread Starter
Join Date: Sep 2009
Location: southern indiana
Posts: 37
Bikes: dicks special!
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
broken spokes! bad wheel?
I broke a spoke on a 40 mile ride last weekend and not a week later I broke another spoke on a short 15 mile ride....A couple weeks before that also I broke one. My wheels were trued by a good bike mechanic and they've been true each time. I'm 255 and ride 12-14 avg on mostly smooth roads on a Trek 2100 with 700cx23. I got to thinking that maybe I got a cheap wheel. I went to a LBS and asked for a "cheap" wheel. Did he do just that, give me a cheap wheel? Should I buy a bettter wheel? Wider tire? Any advice is appreciated.
#3
VoodooChile
Join Date: May 2008
Location: AZ
Posts: 1,048
Bikes: Salsa Casseroll
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
How old is the wheel? I had a solid wheel, well trued and maintained, start popping spokes every few weeks. The wheel mechanic at the LBS suggested that if it kept happening, I might consider rebuilding the wheel and replacing all the spokes.
Ummm...yeh...any reason to think that you got more than you paid for?
Ummm...yeh...any reason to think that you got more than you paid for?
#4
Senior Member
Um, considering that you've told us absolutely nothing about the wheel in question, other than the fact that spokes are breaking, it impossible to answer your question.
__________________
Birth Certificate, Passport, Marriage License Driver's License and Residency Permit all say I'm a Fred. I guess there's no denying it.
Birth Certificate, Passport, Marriage License Driver's License and Residency Permit all say I'm a Fred. I guess there's no denying it.
#5
Senior Member
Join Date: Jul 2006
Location: Columbus, OH
Posts: 11,375
Bikes: '08 Surly Cross-Check, 2011 Redline Conquest Pro, 2012 Spesh FSR Comp EVO, 2015 Trek Domane 6.2 disc
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 7 Times
in
6 Posts
There's different kinds of cheap. I have 3 pairs of cheap wheels:
Pair 1 - IRO house-built customs. House brand rims and hubs on Sapim spokes. $150 for the pair.
I beat them like they insulted my Mom. I've raced a season of cyclocross on them. They've needed minor truing here and there. They needed an initial tension increase, but they were round, true, and tension balanced.
Pair 2 - IRO house brand hoops and hubs, DT Champion 2.0 spokes, personally handbuilt. $98 plus my time. Commuter and long distance wheels. They don't get the harsh torture that the race wheels get, but they see more frequent use and I use them as my roller-wheels in the winter (easy abuse, but still consistent miles on them).
Pair 3 - SUN CR18 rims, DT Champion spokes 2.0 and 1.8, IRO house brand rear hub, SON28 front (so these aren't "cheap" all-around) but the hoops are only $25 each and the spokes are $0.45/ea
Randonneuring and commuting wheelset. Sees plenty of rutted chipseal, gravel, hardpack dirt roads, grass paths here and there, and I throw CX tires on them to commute through the snow. They're heavy, but they're nigh indestructable.
Cheap components like sub-$30 rims and hubs don't mean that the craftsmanship of the part is bad. There are good, inexpensive components out there.
The place you can't be uncertain is the worksmanship of the build. You could buy a HED Belgium rim, lace it to a DT 240 hub with Sapim CX-Ray spokes, and wrap it in a pricey UST tire full of Stan's and have the whole $300+ shootin' match fall apart after 5 miles if the build quality was crap.
Pair 1 - IRO house-built customs. House brand rims and hubs on Sapim spokes. $150 for the pair.
I beat them like they insulted my Mom. I've raced a season of cyclocross on them. They've needed minor truing here and there. They needed an initial tension increase, but they were round, true, and tension balanced.
Pair 2 - IRO house brand hoops and hubs, DT Champion 2.0 spokes, personally handbuilt. $98 plus my time. Commuter and long distance wheels. They don't get the harsh torture that the race wheels get, but they see more frequent use and I use them as my roller-wheels in the winter (easy abuse, but still consistent miles on them).
Pair 3 - SUN CR18 rims, DT Champion spokes 2.0 and 1.8, IRO house brand rear hub, SON28 front (so these aren't "cheap" all-around) but the hoops are only $25 each and the spokes are $0.45/ea
Randonneuring and commuting wheelset. Sees plenty of rutted chipseal, gravel, hardpack dirt roads, grass paths here and there, and I throw CX tires on them to commute through the snow. They're heavy, but they're nigh indestructable.
Cheap components like sub-$30 rims and hubs don't mean that the craftsmanship of the part is bad. There are good, inexpensive components out there.
The place you can't be uncertain is the worksmanship of the build. You could buy a HED Belgium rim, lace it to a DT 240 hub with Sapim CX-Ray spokes, and wrap it in a pricey UST tire full of Stan's and have the whole $300+ shootin' match fall apart after 5 miles if the build quality was crap.
__________________
"I feel like my world was classier before I found cyclocross."
- Mandi M.
"I feel like my world was classier before I found cyclocross."
- Mandi M.
#6
SuperGimp
Sounds like you are a satisfied customer - you got exactly what you asked for.
#7
Senior Member
Join Date: Feb 2011
Location: NW Louisiana
Posts: 731
Bikes: 2011 Trek Madone 5.2 (RIP), 2013 Trek Domane 5.9
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Sometimes it's just a case of bad spokes. But, in this case, you asked and you probably received.
#8
Senior Member
I needed an inexpensive wheelset to start longer rides. I just didn't have the $$ for a good set. I picked up the Vuelta Corsa HDs from Nashar for $128 ($159 with an additional 20% limited sale discount). The are working out great and the only downside is the weight, they are heavy. The trade off of not worrying about spokes is worth it. Now I can go on long rides and have peace of mind.
I don't know if this is an option for you....but just wanted to mention it.
Good Luck
I don't know if this is an option for you....but just wanted to mention it.
Good Luck
#9
Member
Thread Starter
Join Date: Sep 2009
Location: southern indiana
Posts: 37
Bikes: dicks special!
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Lenny that was helpful, thanks. I was looking at those wheels.
Here's one thing don't like; I went into a LBS and said I need cheap wheel. Which means I don't need the top of the line racing wheel, but I would hope the shop would notice I'm "not little" and they would say "you might need a sturdier wheel".
So would a more expensive wheel actually be stronger and able to handle my weight?
Here's one thing don't like; I went into a LBS and said I need cheap wheel. Which means I don't need the top of the line racing wheel, but I would hope the shop would notice I'm "not little" and they would say "you might need a sturdier wheel".
So would a more expensive wheel actually be stronger and able to handle my weight?
#10
Senior Member
I have been looking into wheels for a while (since I upgraded my bike) and I am finding price has nothing to do with it The spoke count, types of spokes, type of rim, hubs and of course the wheel build itself, are what seem to be important. You can spend $1000 on wheels that wont last for someone over 200lbs.
That is why those HDs are working for me. They got a lot of good reviews on Nashbar and on these forums.
I am happy with them, they work great and bought me time.....to save and decide.
Good luck
That is why those HDs are working for me. They got a lot of good reviews on Nashbar and on these forums.
I am happy with them, they work great and bought me time.....to save and decide.
Good luck
#11
Senior Member
Join Date: Oct 2005
Location: Fargo, ND
Posts: 188
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Lenny that was helpful, thanks. I was looking at those wheels.
Here's one thing don't like; I went into a LBS and said I need cheap wheel. Which means I don't need the top of the line racing wheel, but I would hope the shop would notice I'm "not little" and they would say "you might need a sturdier wheel".
So would a more expensive wheel actually be stronger and able to handle my weight?
Here's one thing don't like; I went into a LBS and said I need cheap wheel. Which means I don't need the top of the line racing wheel, but I would hope the shop would notice I'm "not little" and they would say "you might need a sturdier wheel".
So would a more expensive wheel actually be stronger and able to handle my weight?
Have you talked to the shop that sold you the wheel? Maybe see what they have to say about it. Maybe they'll take the old wheel back and get you into something a little sturdier.
Thread
Thread Starter
Forum
Replies
Last Post
nazran
Clydesdales/Athenas (200+ lb / 91+ kg)
7
09-26-11 09:39 AM