One word: wool. Go to 2nd hand store a get an old wool sweater and you'll stay toasty in the coldest weather.

I find snow to be OK to ride on if it snows regularly - that usually means that it is cold and the roads will be plowed. Shoulder seasons are the worst.

I am almost ready, but the weather has a bit of a jump on me. After looking at tires online and finding them to be back ordered at many retailers, I decided to do the right thing and give my LBS the chance to fill my needs. It just so happened that he had a set of studded tires in 700x35c that were returned by another customer due to a wobble. He couldn't find anything wrong with them, so he offered them to me for $30 each. I was so excited. I finally had a chance to mount them this morning just to find a bulge in one of the tires. I checked the bead and it looked good, but deflated them and tried again. There is no doubt that this is a defect in the tire. The LBS is on winter hours and not open again until Wednesday :(

https://cimg3.ibsrv.net/gimg/bikefor...8b518cd3d6.jpg

Wow! That is a stunning wobble. How does it ride? You gotta try 'em at least, just to see what the ride is like.

I'm struggling to fathom what sort of defect could could cause the tire to be that far off. You've checked the molding line on the tire, and it's even to the rim all the way around?

It can and still does happen. I had a Schwalbe slick come that had a similarly bad case of molded-wobbly 2 years back.

Lol, that looks like a bizarro tires. :) Too bad they didn't work out. That used to happen to me a lot with AV equipment. It would be on the floor at a super bargain but it wasn't until you got it home and connected it that you noticed the defects.

Luckily, I'd always buy from big box stores so returns (within 30 days) were never an issue. Don't remember ever making a return to my LBS.

Being an inquisitive person, I decided to attempt to figure out what the problem is with this tire. While I originally said it felt like it had delaminated, I was wrong. There was a noticable weakness in the sidewalls, one side was a few inches below the other side. Upon further investigation, it became clear that there is a section of nylon material missing from the original tire manufacture. Taking a look at the photo, you can see the lack of diagonal lines (threads) on the inner tire for about 2 inches.
https://cimg4.ibsrv.net/gimg/bikefor...c91aca9fd6.jpg

Wow! Good eye. And that spot corresponds w/the deformity? Really good eye picking that up.

Yes, that is the deformity area. I am not sure if your are familiar with tire construction, but the orientation of the nylon threads is diagonal and folded, creating three layers of perpendicular threads. Due to this construction, if there is a gap in the threads, it will be largest at the bead, narrowing as it nears the center of the tread. These areas are likely only rubber with no structure, creating a very weak spot (bulge in sidewall) with a similarly weak spot on the opposing sidewall either before or after at about a 45 degree angle if the tire were to be flattened out.

Once again, I am a very inquisitive person who has a need to understand how things work. This need to understand is exacerbated when there is a failure.

Hey [MENTION=484437]medic75[/MENTION], I would check these guys as they carry and ship everything to the US.

https://www.bike24.de/1.php?mid=0;pg...,104;content=7

I know more now than I did ten minutes ago :-). Thanks for the explanation. Interesting, and I hadn't known to that level of detail.

I love winter riding. I'm also one of the odd ones who appreciates mid 30s and raining. We live in such climate controlled cocoons that there's something wonderful about being able to appreciate everything that the weather throws at you. As other note, don't ride when you feel it's not safe to do so. Over time you will find that your definition of "safe" will change as you acclimate yourself to weather and road conditions, but a good rule of thumb is to not do what you think you can't do.

Any mid 80s into early 90s MTB will serve you well (with studded tires for icy days--and you can always pick up a cheap wheelset to make things easier, i.e. it's easier to change out wheels when you have to than it is to change out tires).

At only 2 miles your clothing choices are pretty simple, as you won't have to be concerned about overheating. I start out cold, as experience tells me that after a few miles I'm comfortable. The easiest mistake to make with clothing is to overdress. You'll be surprised how little you have to wear. After refining my clothing for several years, I find that softshell pants are very versatile (long underwear at about 5 degrees), waterproof socks (Showers Pass) function well with my Five Ten Freerider platform shoes (with insulated shoes or boots around 15 degrees). Up top is where I switch things out a lot. I've found what I believe to be the perfect jacket, Black Diamond First Light Hoody. It has "active insulation," which means it keeps me warm and is adequately windproof, but it pumps the heat out well. Under that I wear short or long sleeve merino, or both when it's below 0. You'll want to get some versatile hand wear. Down to the low 20s I wear mid weight fleece gloves or mitts with a very light windproof shell. Down to 5 or so I wear a pair of Hestra Army trigger finger gloves. Below that I put pogies on and switch back to light or mid weight fleece. Head gear the same. Versatile pieces (buff in combination with light merino skull cap).

You'll love winter riding. When I bought a fatbike back in 2013 I sold my trainer. Haven't looked back.

I am just going to say, skip all the glove advice if your hands get cold easy. I have tried many many gloves and nothing would really work when the temps dropped below 0C.
I finally bought bar mitts. My life changed.
Last night went for a test ride at -3C. All I had was think liner gloves on my hands for just over an hour out and only then I started to get cold. I then put on my PI lobster gloves and one toasty for another hour out with no chill what so ever.
Highly HIGHLY recommend.

A hearty +1 on this. Pogies are the way to go. I get mine from moosemitts.com, but there are other brands out there.

Sorry guys. I stand by XC ski gloves.

LillSport

I go with a Legend Thermo Gold that I skied with.

http://lillsport.com/product/legend-thermo-gold-0108-3/

Was 2C / 35F and windy on the way in. Is current 5C/40F and raining/sleeting almost and still OK.

Have the heat on because I'm a wimp (as I get older).

Sorry dudes, bar mitts are huge and don't allow finger movements ... I can't open a bike locker or buy a train ticket or even operate a cycle lane crossing signal with a bar mitt on.

The other day I was out in -7 C, and there's colder yet in store for my region. Hence why the mitts. I prefer the mitts along with thin gloves (like yours) to wearing thick gloves that are unwieldy. Like you, I prefer to wear cross country ski gloves because they are thin.

[/quote]Sorry dudes, bar mitts are huge and don't allow finger movements ... I can't open a bike locker or buy a train ticket or even operate a cycle lane crossing signal with a bar mitt on.[/QUOTE]

The mitts allow for plenty of movement, and it's easy to pull one's hand out to do whatever is needed. The newer ones that I just bought hold their shape better too, making it easier to pull a hand out and put it back in again.

All good, but 35F is late autumn, early spring.

Yeah, we don't get below 0C that often here. However, it is very windy and rainy. I like having the ability to bend the fingers (buy a coffee or push a train button or lift the bike to my shoulders) with the gloves on. I usually ski with the gloves down to -20C, so it should be OK for lower temps. I also don't like having to haul large stuff when I do a bike/train commute, thus I try to not have bulky items that require storage in my 20L backpack.

But, I must admit that you're right that 0C isn't that cold.

Yeah, they're good down to -20C when I ski with them on the continent, however on the southern coast of England, it doesn't go below 0C that often. So, fair enough.

I need better gloves! Mine are for cross-country skiing, so they don't retain much heat. And agreed on wanting some dexterity. Puffy gloves on a bike are not my favorite thing.

They are wind proof though, I assume. Put another glove over top (freeze for example) and you'll be quite a bit warmer

I wear mountaineering mittens. With barcons mittens work fine.