Wald rear baskets
05-25-23, 07:21 AM
#1
Senior Member
Thread Starter
Join Date: Jun 2013
Posts: 817
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 332 Post(s)
Likes: 0
Liked 125 Times
in
71 Posts
Wald rear baskets
I've just bought a set of Egg (rear) wire baskets at a yard sale. They don't have any clips to attach to the rack. I can't find anyone who sells just the clips for it. Is it possible to make just the clips from something? (Like mild steel that you can bend somehow?) Zip Ties wouldn't do as they are too light for the job. Any ideas?
05-25-23, 11:15 AM
#2
Been Around Awhile
Join Date: Oct 2004
Location: Burlington Iowa
Posts: 29,755
Bikes: Vaterland and Ragazzi
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 12 Post(s)
Liked 1,391 Times
in
942 Posts
I've just bought a set of Egg (rear) wire baskets at a yard sale. They don't have any clips to attach to the rack. I can't find anyone who sells just the clips for it. Is it possible to make just the clips from something? (Like mild steel that you can bend somehow?) Zip Ties wouldn't do as they are too light for the job. Any ideas?
05-25-23, 11:55 AM
#3
Senior Member
Join Date: Jan 2009
Location: Colorado Springs, CO
Posts: 5,868
Bikes: 2015 Charge Plug, 2007 Dahon Boardwalk, 1997 Nishiki Blazer, 1984 Nishiki International, 2006 Felt F65, 1989 Dahon Getaway V
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 1335 Post(s)
Liked 1,580 Times
in
779 Posts
Most P-clips can be flattened. Take off any rubber or silicon cushions.
05-25-23, 03:26 PM
#4
Cantilever believer
Join Date: Nov 2021
Location: Phoenix, AZ
Posts: 1,085
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 366 Post(s)
Liked 1,191 Times
in
569 Posts
I've used the proprietary clips, small circle clamps, zip ties, tie wire, and probably several other methods to attach folding baskets to a rack (chewing gum is not recommended).
Zip ties may need periodic replacement due to deterioration (UV/ozone) and wear. Clips/clamps may be susceptible to rattle noise unless also clamped to the rack leg. Wire should be trimmed / tied carefully to avoid perforation of cargo or riders by exposed ends. Here in Arizona, I've had the best long-term results with tie wire or clips/clamps.
Zip ties may need periodic replacement due to deterioration (UV/ozone) and wear. Clips/clamps may be susceptible to rattle noise unless also clamped to the rack leg. Wire should be trimmed / tied carefully to avoid perforation of cargo or riders by exposed ends. Here in Arizona, I've had the best long-term results with tie wire or clips/clamps.
__________________
Richard C. Moeur, PE - Phoenix AZ, USA
https://www.richardcmoeur.com/bikestuf.html
Richard C. Moeur, PE - Phoenix AZ, USA
https://www.richardcmoeur.com/bikestuf.html
Likes For tyrion:
05-25-23, 09:30 PM
#6
Been Around Awhile
Join Date: Oct 2004
Location: Burlington Iowa
Posts: 29,755
Bikes: Vaterland and Ragazzi
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 12 Post(s)
Liked 1,391 Times
in
942 Posts
Rubber straps/bungee cords of the correct length and applied securely to the rear rack work well too.
05-25-23, 10:44 PM
#7
Cantilever believer
Join Date: Nov 2021
Location: Phoenix, AZ
Posts: 1,085
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 366 Post(s)
Liked 1,191 Times
in
569 Posts
For a basket atop a rack where the compressive load path is directly from the basket to the rack (see also the "show your milk crate" thread), bungees have an easier job of simple stabilization, and do OK.
__________________
Richard C. Moeur, PE - Phoenix AZ, USA
https://www.richardcmoeur.com/bikestuf.html
Richard C. Moeur, PE - Phoenix AZ, USA
https://www.richardcmoeur.com/bikestuf.html
05-26-23, 06:27 AM
#8
Junior Member
I agree with the idea of getting stronger zip ties. They come in all sizes. They are rated for different weight loads. Black ones are UV resistant. But all of them are made from nylon which can get brittle. Water will soften them up again since it functions as a plasticizer (softener) for nylon. So drenching them in water every now and then will help a lot.
Also, rope or heavy twine will do in a pinch, but it's helpful to learn some knots. The taut line knot is a good one for racks and a good one to know in general.
Also, rope or heavy twine will do in a pinch, but it's helpful to learn some knots. The taut line knot is a good one for racks and a good one to know in general.
06-03-23, 01:16 PM
#9
Senior Member
My suggestion would be to use water hose clamps to screw the basket to the rack and zip ties for the lower part of the basket.
06-07-23, 02:24 AM
#10
Happy banana slug
Join Date: Sep 2015
Location: Arcata, California, U.S., North America, Earth, Saggitarius Arm, Milky Way
Posts: 3,558
Bikes: 1984 Araya MB 261, 1992 Specialized Rockhopper Sport, 1993 Hard Rock Ultra, 1994 Trek Multitrack 750, 1995 Trek Singletrack 930
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 1420 Post(s)
Liked 1,390 Times
in
824 Posts
My dudes,use stainless steel zip ties.
https://www.amazon.com/s?k=stainless..._ts-doa-p_3_10
https://www.amazon.com/s?k=stainless..._ts-doa-p_3_10
Likes For Korina:
