Good tires for rainy days on slick pavement
#1
Perpetual Newbie
Thread Starter
Join Date: Aug 2004
Location: Santa Monica CA
Posts: 19
Bikes: 2004 Giant OCR1, 2002 Fuji Odessa MTB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I put some kevlar belted Specialized Armadillo Nimbus EX tires (26X1.50) on my Fuji MTB that I commute with in LA.
They're great for avoiding flats, but they're really really low traction in the rain.
I've fallen a couple times lately - not such a good thing in LA traffic.
Anyone have a suggestion for a good rain tire - hopefully flat resistant as well?
Thanks,
Dennis
They're great for avoiding flats, but they're really really low traction in the rain.
I've fallen a couple times lately - not such a good thing in LA traffic.
Anyone have a suggestion for a good rain tire - hopefully flat resistant as well?
Thanks,
Dennis
Last edited by Sure_handed; 10-24-05 at 06:39 PM. Reason: edited to add "Armadillo"
#2
Infamous Member
Join Date: Sep 2005
Location: Ohio
Posts: 24,360
Bikes: Surly Big Dummy, Fuji World, 80ish Bianchi
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 4 Times
in
3 Posts
Originally Posted by Sure_handed
I put some kevlar belted Specialized Armadillo Nimbus EX tires (26X1.50) on my Fuji MTB that I commute with in LA.
They're great for avoiding flats, but they're really really low traction in the rain.
I've fallen a couple times lately - not such a good thing in LA traffic.
Anyone have a suggestion for a good rain tire - hopefully flat resistant as well?
Thanks,
Dennis
They're great for avoiding flats, but they're really really low traction in the rain.
I've fallen a couple times lately - not such a good thing in LA traffic.
Anyone have a suggestion for a good rain tire - hopefully flat resistant as well?
Thanks,
Dennis
__________________
"Let us hope our weapons are never needed --but do not forget what the common people knew when they demanded the Bill of Rights: An armed citizenry is the first defense, the best defense, and the final defense against tyranny. If guns are outlawed, only the government will have guns. Only the police, the secret police, the military, the hired servants of our rulers. Only the government -- and a few outlaws. I intend to be among the outlaws" - Edward Abbey
"Let us hope our weapons are never needed --but do not forget what the common people knew when they demanded the Bill of Rights: An armed citizenry is the first defense, the best defense, and the final defense against tyranny. If guns are outlawed, only the government will have guns. Only the police, the secret police, the military, the hired servants of our rulers. Only the government -- and a few outlaws. I intend to be among the outlaws" - Edward Abbey
#3
Senior Member
I haven't noticed any problems in the rain with the same exact tires on my MTB/hybrid commuter. Can you describe how you've fallen? Painted lines, metal grates, railroad tracks, leaves, oil spots, etc. are slippery regardless of what tires you are using. I've spun my rear tire getting moving from a stop (and almost fallen) but that's only because I was in the center of the lane where the cars drip oil.
#4
totally louche
Join Date: Oct 2004
Location: A land that time forgot
Posts: 18,023
Bikes: the ever shifting stable loaded with comfortable road bikes and city and winter bikes
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 9 Times
in
8 Posts
Conti Town and Country tires are good wet weather 26ers. Pretty good for Seattle weather anyways.
#5
2-Cyl, 1/2 HP @ 90 RPM
Join Date: Oct 2003
Location: NYC
Posts: 15,762
Bikes: 04' Specialized Hardrock Sport, 03' Giant OCR2 (SOLD!), 04' Litespeed Firenze, 04' Giant OCR Touring, 07' Specialized Langster Comp
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 4 Times
in
4 Posts
Anything with a light thread.
Large knobs slip too. But a light thread on the tires help you grip little features on the ground. I have the same tires and find they're pretty good. I run mine at like 65-70psi. You might want to let 10-15 psi out on rainy days.
Large knobs slip too. But a light thread on the tires help you grip little features on the ground. I have the same tires and find they're pretty good. I run mine at like 65-70psi. You might want to let 10-15 psi out on rainy days.
#6
Senior Member
Join Date: May 2005
Location: Albany, WA
Posts: 7,393
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 321 Post(s)
Likes: 0
Liked 7 Times
in
6 Posts
Originally Posted by slvoid
But a light thread on the tires help you grip little features on the ground.
https://yarchive.net/bike/slicks.html
#7
I drink your MILKSHAKE
Join Date: Jul 2002
Location: St. Petersburg, FL
Posts: 15,061
Bikes: 2003 Specialized Rockhopper FSR Comp, 1999 Specialized Hardrock Comp FS, 1971 Schwinn Varsity
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
Originally Posted by joejack951
I haven't noticed any problems in the rain with the same exact tires on my MTB/hybrid commuter. Can you describe how you've fallen? Painted lines, metal grates, railroad tracks, leaves, oil spots, etc. are slippery regardless of what tires you are using. I've spun my rear tire getting moving from a stop (and almost fallen) but that's only because I was in the center of the lane where the cars drip oil.
Originally Posted by slvoid
Anything with a light thread.
Large knobs slip too. But a light thread on the tires help you grip little features on the ground.
Large knobs slip too. But a light thread on the tires help you grip little features on the ground.
From Jobst Brandt:
Tread patterns have no effect on surfaces in which they leave no impression. That is to say, if the road is harder than the tire, a tread pattern does not improve traction. That smooth tires have better dry traction is probably accepted by most bicyclists, but wet pavement still appears to raise doubts even though motorcycles have shown that tread patterns do not improve wet traction.
A window-cleaning squeegee demonstrates this effect well. Even with a new sharp edge, it glides effortlessly over wet glass leaving a microscopic layer of water behind to evaporate. On a second swipe, the squeegee sticks to the dry glass. This example should make apparent that the lubricating water layer cannot be removed by tire tread, and that only the micro-grit of the road surface can penetrate this layer to give traction. For this reason, metal plates, paint stripes, and railway tracks are incorrigibly slippery.
Besides having better wet and dry traction, smooth tread also has lower rolling resistance, because its rubber does not deform into tread voids. Rubber being essentially incompressible, deforms like a water filled balloon, changing shape, but not volume. For a tire with tread voids, its rubber bulges under load and rebounds with less force than the deforming force. This internal damping causes the energy losses of rolling resistance. In contrast the smooth tread transmits the load to the loss-free pneumatic compliance of the tire.
In curves, tread features squirm to allow walking and ultimately, early breakout. This is best demonstrated on knobby MTB tires, some of which track so poorly that they are difficult to ride no-hands.
Tread patterns have no effect on surfaces in which they leave no impression. That is to say, if the road is harder than the tire, a tread pattern does not improve traction. That smooth tires have better dry traction is probably accepted by most bicyclists, but wet pavement still appears to raise doubts even though motorcycles have shown that tread patterns do not improve wet traction.
A window-cleaning squeegee demonstrates this effect well. Even with a new sharp edge, it glides effortlessly over wet glass leaving a microscopic layer of water behind to evaporate. On a second swipe, the squeegee sticks to the dry glass. This example should make apparent that the lubricating water layer cannot be removed by tire tread, and that only the micro-grit of the road surface can penetrate this layer to give traction. For this reason, metal plates, paint stripes, and railway tracks are incorrigibly slippery.
Besides having better wet and dry traction, smooth tread also has lower rolling resistance, because its rubber does not deform into tread voids. Rubber being essentially incompressible, deforms like a water filled balloon, changing shape, but not volume. For a tire with tread voids, its rubber bulges under load and rebounds with less force than the deforming force. This internal damping causes the energy losses of rolling resistance. In contrast the smooth tread transmits the load to the loss-free pneumatic compliance of the tire.
In curves, tread features squirm to allow walking and ultimately, early breakout. This is best demonstrated on knobby MTB tires, some of which track so poorly that they are difficult to ride no-hands.
From Sheldon Brown:
Tread for on-road use
Bicycle tires for on-road use have no need of any sort of tread features; in fact, the best road tires are perfectly smooth, with no tread at all!
Unfortunately, most people assume that a smooth tire will be slippery, so this type of tire is difficult to sell to unsophisticated cyclists. Most tire makers cater to this by putting a very fine pattern on their tires, mainly for cosmetic and marketing reasons. If you examine a section of asphault or concrete, you'll see that the texture of the road itself is much "knobbier" than the tread features of a good quality road tire. Since the tire is flexible, even a slick tire deforms as it comes into contact with the pavement, acquiring the shape of the pavement texture, only while incontact with the road.
People ask, "But don't slick tires get slippery on wet roads, or worse yet, wet metal features such as expansion joints, paint stripes, or railroad tracks?" The answer is, yes, they do. So do tires with tread. All tires are slippery in these conditions. Tread features make no improvement in this.
Tread for on-road use
Bicycle tires for on-road use have no need of any sort of tread features; in fact, the best road tires are perfectly smooth, with no tread at all!
Unfortunately, most people assume that a smooth tire will be slippery, so this type of tire is difficult to sell to unsophisticated cyclists. Most tire makers cater to this by putting a very fine pattern on their tires, mainly for cosmetic and marketing reasons. If you examine a section of asphault or concrete, you'll see that the texture of the road itself is much "knobbier" than the tread features of a good quality road tire. Since the tire is flexible, even a slick tire deforms as it comes into contact with the pavement, acquiring the shape of the pavement texture, only while incontact with the road.
People ask, "But don't slick tires get slippery on wet roads, or worse yet, wet metal features such as expansion joints, paint stripes, or railroad tracks?" The answer is, yes, they do. So do tires with tread. All tires are slippery in these conditions. Tread features make no improvement in this.
#8
Banned
Join Date: Nov 2004
Posts: 10,082
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Originally Posted by chipcom
Continental Top Touring 2000, Schwalbe Marathons.
Last year I used Conti Top Touring (not the 2000) with the inverse tread like the Town and Country. They were very good on ice.
#9
2-Cyl, 1/2 HP @ 90 RPM
Join Date: Oct 2003
Location: NYC
Posts: 15,762
Bikes: 04' Specialized Hardrock Sport, 03' Giant OCR2 (SOLD!), 04' Litespeed Firenze, 04' Giant OCR Touring, 07' Specialized Langster Comp
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 4 Times
in
4 Posts
Originally Posted by jur
How do you know this? Jobst Brandt writes that no tread is best for road cycling, wet and dry.
https://yarchive.net/bike/slicks.html
https://yarchive.net/bike/slicks.html
Personally I've slipped on the edges of manholes or those stupid metal plates they sink halfway into the ground for construction and have had the edge of a thread grip onto the sharp edge of the interface between it and the pavement. How do I know? Cause afterwards I go home and I can see a patch of the thread where it's worn away.
Just try it, on a real patch of dirty road, which is usually full of grit, dust, sand, etc, spin the wheel and then let it down on the ground, see which one slips the most before stopping. Many people also assume that the threads are to prevent hydroplaning, which isn't always true, it's always nice to have something to lock onto features on the road, once again, which isn't completely smooth and flat.
I have a road tire 700x23 with a really fine pitch thread on it, which gets less traction than a pure slick then. I'm assuming if this guy's right then the smoother my rims are and the smoother my brake pads are, the better they work?
Last edited by slvoid; 10-25-05 at 05:34 AM.
#10
2-Cyl, 1/2 HP @ 90 RPM
Join Date: Oct 2003
Location: NYC
Posts: 15,762
Bikes: 04' Specialized Hardrock Sport, 03' Giant OCR2 (SOLD!), 04' Litespeed Firenze, 04' Giant OCR Touring, 07' Specialized Langster Comp
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 4 Times
in
4 Posts
Originally Posted by Sure_handed
I put some kevlar belted Specialized Armadillo Nimbus EX tires (26X1.50) on my Fuji MTB that I commute with in LA.
They're great for avoiding flats, but they're really really low traction in the rain.
I've fallen a couple times lately - not such a good thing in LA traffic.
Anyone have a suggestion for a good rain tire - hopefully flat resistant as well?
Thanks,
Dennis
They're great for avoiding flats, but they're really really low traction in the rain.
I've fallen a couple times lately - not such a good thing in LA traffic.
Anyone have a suggestion for a good rain tire - hopefully flat resistant as well?
Thanks,
Dennis
#11
totally louche
Join Date: Oct 2004
Location: A land that time forgot
Posts: 18,023
Bikes: the ever shifting stable loaded with comfortable road bikes and city and winter bikes
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 9 Times
in
8 Posts
I think tread does improve traction in the less than perfect world of urban cycling.
Like, around corners with gravel. There's a LOT of coarse blacktop out there. Or, when you cut a lawn around campus or wherever for some non VC reason. Not big honking knobbies though. But fat tires are more grippy for sure.
Conti Town and Country or TT have inverse tread and a lot of solid angular rubber extending to the sidewalls for cornering grip.
And, hey, even if it's partially psychological, I'll take the advantages of a little tread on a big tire. Continental Town and Country 26x2.1s are some of the best urban 26" tires around. They are on a lot of police bikes, if you haven't seen them in your LBS.
Like, around corners with gravel. There's a LOT of coarse blacktop out there. Or, when you cut a lawn around campus or wherever for some non VC reason. Not big honking knobbies though. But fat tires are more grippy for sure.
Conti Town and Country or TT have inverse tread and a lot of solid angular rubber extending to the sidewalls for cornering grip.
And, hey, even if it's partially psychological, I'll take the advantages of a little tread on a big tire. Continental Town and Country 26x2.1s are some of the best urban 26" tires around. They are on a lot of police bikes, if you haven't seen them in your LBS.
#12
imminent danger
Join Date: Oct 2005
Posts: 739
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
A little bit of tread will do practically nothing with gravel, sand or other loose surfaces.
Notice how those Tour de France riders still have slicks on, even when it's raining on a downhill descent with switchbacks. That's because they have the best traction.
The only thing that will improve your traction in the rain is to increase the width of the tire. It'll slow you down a bit on the straight but will increase your rolling surface area on cornering.
Nothing short of caterpiller tracks will save you from a skid on a well polished manhole cover. Best thing to is contact your local authority and ask them nicely to surface it.
Notice how those Tour de France riders still have slicks on, even when it's raining on a downhill descent with switchbacks. That's because they have the best traction.
The only thing that will improve your traction in the rain is to increase the width of the tire. It'll slow you down a bit on the straight but will increase your rolling surface area on cornering.
Nothing short of caterpiller tracks will save you from a skid on a well polished manhole cover. Best thing to is contact your local authority and ask them nicely to surface it.
#13
Macaws Rock!
Join Date: May 2005
Location: San Francisco, CA
Posts: 1,513
Bikes: 2005 Soma Doublecross
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
There are a pair of Marathon Slicks on their way to me from Schawlbe USA, and we have rain forecast for later in the week so I'll be testing this tread (not thread) theory personally. I believe tread patterns do nothing on paved roads though.
__________________
---
San Francisco, California
---
San Francisco, California
#14
Long Live Long Rides
Join Date: Apr 2004
Location: KCMO
Posts: 718
Bikes: 1988 Specialized Rockhopper Comp, converted for touring/commuting. 1984 Raleigh Team USA road bike.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I've been using Panaracer T-Serve tires for two years. The compound is soft and they were about 1lb lighter than some of the other tires I looked at. My LBS recommended these for wet commuting conditions. So far, no complaints. https://www.universalcycles.com/shopp...6&category=179
#15
totally louche
Join Date: Oct 2004
Location: A land that time forgot
Posts: 18,023
Bikes: the ever shifting stable loaded with comfortable road bikes and city and winter bikes
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 9 Times
in
8 Posts
A little bit of tread does nothing on loose surfaces like gravel? Huh? Has this been thought through fully, the seldom?
I think those tour de france riders have slicks on because they're racing!
I think those tour de france riders have slicks on because they're racing!
#16
imminent danger
Join Date: Oct 2005
Posts: 739
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Yep, but if they were loosing traction because they didn't have tread then I guarantee that they would change to treaded tires. Traction is critical when it comes to speed.
#18
imminent danger
Join Date: Oct 2005
Posts: 739
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
A little bit of tread does nothing on loose surfaces like gravel? Huh? Has this been thought through fully, the seldom?
Slipslidy fun ahoy.
#19
Senior Member
Join Date: Sep 2005
Location: Charlotte, NC
Posts: 151
Bikes: Gary Fisher Cake 3dlx, GT Force
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 14 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I use Bontrager Road Warriors (26x1.5 slicks) and find they have substantially more traction (wet or dry) than any other tire I've used. Just my experience...
#20
totally louche
Join Date: Oct 2004
Location: A land that time forgot
Posts: 18,023
Bikes: the ever shifting stable loaded with comfortable road bikes and city and winter bikes
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 9 Times
in
8 Posts
Comparitively speaking, a Conti town and country, TT or a shwalbe marathon has a light tread compared to a typical 26" mtb tire.
If someone can find me flawless blacktop, I'd ride slicks, but a tire with tread will grab any rugosity and add traction. Bolts on steel plates, or drain grates, for instance. Also, every expansion joint you ride over. A little bit of tread just makes plain good sense, esp in the imperfect world of urban cycling.
If someone can find me flawless blacktop, I'd ride slicks, but a tire with tread will grab any rugosity and add traction. Bolts on steel plates, or drain grates, for instance. Also, every expansion joint you ride over. A little bit of tread just makes plain good sense, esp in the imperfect world of urban cycling.
#21
Senior Member
Join Date: Apr 2005
Location: Cleveland
Posts: 1,602
Bikes: Pugsley, fixie commuter, track bike
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Both arguments seem to have valid points however I think the only real difference is tire pressure and width. Even on a dirt road I notice no difference between light treaded Marathons and Marathon Slicks. But 85 psi 35mm tires definately have better traction than 120 psi 25mm. You best bet for wet weather traction is probably something like a Schwalbe Big Apple (50 mm or 60mm) run under 60 psi. Probably wouldn't be terribly slow either but you will need a MTB or 29er to be able to fit the tires with fenders (or even fit the tires period).
In wet conditions TDF racers still use slicks but will run wider tires at lower pressures than they use on dry days.
Craig
In wet conditions TDF racers still use slicks but will run wider tires at lower pressures than they use on dry days.
Craig
#22
Senior Member
Originally Posted by Bekologist
Comparitively speaking, a Conti town and country, TT or a shwalbe marathon has a light tread compared to a typical 26" mtb tire.
If someone can find me flawless blacktop, I'd ride slicks, but a tire with tread will grab any rugosity and add traction. Bolts on steel plates, or drain grates, for instance. Also, every expansion joint you ride over. A little bit of tread just makes plain good sense, esp in the imperfect world of urban cycling.
If someone can find me flawless blacktop, I'd ride slicks, but a tire with tread will grab any rugosity and add traction. Bolts on steel plates, or drain grates, for instance. Also, every expansion joint you ride over. A little bit of tread just makes plain good sense, esp in the imperfect world of urban cycling.
#23
Guest
Posts: n/a
Mentioned: Post(s)
Tagged: Thread(s)
Quoted: Post(s)
I run Town & Country (Conti's) also...
They do very well in Wet or Rainy situations for me.
But like in any Wet weather situation, you have to slow down in the turns/curves.
It's just common sense! The traction is there.
Wet leaves is what freaks me out! Broke my leg on them dayum things 7 years ago!
They do very well in Wet or Rainy situations for me.
But like in any Wet weather situation, you have to slow down in the turns/curves.
It's just common sense! The traction is there.
Wet leaves is what freaks me out! Broke my leg on them dayum things 7 years ago!
#24
totally louche
Join Date: Oct 2004
Location: A land that time forgot
Posts: 18,023
Bikes: the ever shifting stable loaded with comfortable road bikes and city and winter bikes
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 9 Times
in
8 Posts
I know knobbie squirm, Town and countrys don't wiggle in the corners.
#25
darling no baka
Join Date: May 2005
Location: I come from a place where the nuts hunt the squirrels
Posts: 437
Bikes: Bike Friday New World Tourist, 2005 Trek 520, 2005 Raleigh Companion
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by jharte
I've been using Panaracer T-Serve tires for two years. The compound is soft and they were about 1lb lighter than some of the other tires I looked at. My LBS recommended these for wet commuting conditions. So far, no complaints.
__________________
Dragon... ATTACK!
Dragon... ATTACK!