Go Back  Bike Forums > Bike Forums > Commuting
Reload this Page >

How important is frame size?

Notices
Commuting Bicycle commuting is easier than you think, before you know it, you'll be hooked. Learn the tips, hints, equipment, safety requirements for safely riding your bike to work.

How important is frame size?

Old 09-06-07, 02:16 PM
  #1  
Full Member
Thread Starter
 
Join Date: Jul 2006
Posts: 461
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 14 Post(s)
Likes: 0
Liked 4 Times in 3 Posts
How important is frame size?

I'm crossing the 3,000 commuting mile mark and I'm realizing that my enthusiasm has gotten way ahead of my mechanical ability. A

lot of parts need to be replaced but before I make that jump - do i have the right frame size?

I suspect that my frame might be a bit small for me. However, formulas for the right frame size vary and its gotten more difficult to determine frame size. I'm considering getting a longer stem to compensate. I'd like to stick with the same frame but I'll switch if I'm doing something awful to my body.

What harm is there in riding a bike with a frame on the small side?
mattkime is offline  
Old 09-06-07, 02:27 PM
  #2  
GATC
 
Join Date: Jul 2006
Location: south Puget Sound
Posts: 8,728
Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 464 Post(s)
Liked 49 Times in 27 Posts
I was riding a bike w/ a too-small frame. Over the course of a year or so (~3k miles) I kept moving the seatpost up, the saddle back. Never extended the stem but did flip it to lower the bar, stretch reach that way, and then finally gave up. The stock too-small frame probably also had too-short cranks (the bike was well-enough spec'd for a person of the right size, I guess). I don't know about measurable ill effects but it just wasn't comfortable. A friend who is ~5" shorter than me has it now, loves it.
HardyWeinberg is offline  
Old 09-06-07, 02:49 PM
  #3  
Two H's!!! TWO!!!!!
 
chephy's Avatar
 
Join Date: Jul 2005
Location: Toronto, ON
Posts: 4,267
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 27 Post(s)
Liked 12 Times in 8 Posts
There are no real formulas to calculate correct frame size. I'm currently riding a frame that is "supposed" to be too big for me. I tried out lots of frames that were supposed to be right, and they all felt too small. See Peter White's page on bike fit; I agree with what he say: it's all about your unique body geometry, and your unique preferences and comfort.

If you are comfortable riding your current frame, then it's fine. But if you're feeling cramped and adjustments (stem etc.) don't help - get a new one.
chephy is offline  
Old 09-06-07, 03:24 PM
  #4  
It's true, man.
 
Join Date: Aug 2005
Location: North Texas
Posts: 2,726

Bikes: Cannondale T1000, Inbred SS 29er, Supercaliber 29er, Crescent Mark XX, Burley Rumba Tandem

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Size isn't important, it's how you ride the bike.

(Sorry, somebody was gonna say it...)
truman is offline  
Old 09-06-07, 04:09 PM
  #5  
put our Heads Together
 
cerewa's Avatar
 
Join Date: Jun 2003
Location: southeast pennsylvania
Posts: 3,155

Bikes: a mountain bike with a cargo box on the back and aero bars on the front. an old well-worn dahon folding bike

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Whether or not you feel comfortable is the main consideration for choosing a frame size.

Also, I don't recommend you pay much attention to the seat-tube length (which seems to be the standard way of measuring frame size) because

Headtube length is more significant because changing the seat-to-handlebars distance is more complicated than changing the seat-to-pedals distance.

If you don't have any pain problems while riding now, changing frame size/shape might just cause them.
cerewa is offline  
Old 09-06-07, 04:13 PM
  #6  
Senior Member
 
Join Date: Jun 2007
Posts: 684
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
hard to say - if your saddle is all the way up, stem's all the way out, and you feel like your knees are just missing your chin - probably time for a new one...
whatsmyname is offline  
Old 09-06-07, 04:20 PM
  #7  
that bike nut
 
BikingGrad80's Avatar
 
Join Date: Jul 2007
Location: Chicago north
Posts: 939

Bikes: 2010 Motobecane Immortal Force 90' Trek 1400; 90' Trek 850; 06' Trek 520; 01 Iron Horse Victory

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 25 Post(s)
Likes: 0
Liked 3 Times in 2 Posts
I'd say as long as you are in the ball park (within a size or so) as far as frame size you can fine/tune the reach with different stems, the height with the seatpost, and Knee position with the saddle rails and possibly a different seatpost.
BikingGrad80 is offline  
Old 09-06-07, 04:22 PM
  #8  
Senior Member
 
mtnwalker's Avatar
 
Join Date: Dec 2006
Location: Sunnyvale, CA
Posts: 1,952

Bikes: '84 Centurion Accordo RS, '06 Gary Fisher Marlin, '06 Schwinn Fastback 27, '06 Litespeed Teramo

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
I have a bike that has a top tube of 52 cm based on 2 LBS's recommendations. Don't you love it when they can just look at you and say "Hmmm, you need a small frame."? Anyways it turns out that despite my height I really need a 54 cm. Anyways I was able to adjust the bike to finally fit me. It does look a bit weird that the seat is set backwards so much but my knee pain went away and I'm able to ride the bike instead of selling it or getting a new one.

Bottom line,IMO, as long as you can adjust the bike to fit you its fine. Even if it looks too small for you.

EDIT: I also read somewhere that TDF riders purposely ride smaller bikes for reasons that escape me right now.
mtnwalker is offline  
Old 09-06-07, 05:35 PM
  #9  
Senior Member
 
CliftonGK1's Avatar
 
Join Date: Jul 2006
Location: Columbus, OH
Posts: 11,375

Bikes: '08 Surly Cross-Check, 2011 Redline Conquest Pro, 2012 Spesh FSR Comp EVO, 2015 Trek Domane 6.2 disc

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 7 Times in 6 Posts
My road bike is about 4cm too short in the frame. (58cm, I "should" ride a 62)
I raised the seat, put a longer stem with adjustable rise, and I'm going to put a wider bar on next. It fits me comfortably enough that I did 35 miles on it last weekend and felt as if I could have done double that.

Frame size is important when considering what components to buy. Do you need a short reach drop stem, or a long reach riser? A short seatpost, or some gigantic Thompson post? I think that within 2-3cm of the "correct" frame size, and you should be OK with just some minor adjustments.
__________________
"I feel like my world was classier before I found cyclocross."
- Mandi M.
CliftonGK1 is offline  
Old 09-06-07, 08:39 PM
  #10  
hrc.org [=]
 
beoba's Avatar
 
Join Date: Aug 2007
Location: Boston, MA, USA
Posts: 67

Bikes: pre-1993 Specialized HardRock, has Suntour derailleurs/shifters

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by CliftonGK1
My road bike is about 4cm too short in the frame. (58cm, I "should" ride a 62)
Out of curiosity, how tall are you? I'm 6'1 and I'm thinking that I need around a 58-60cm, though I haven't yet tested this theory.
beoba is offline  
Old 09-06-07, 08:41 PM
  #11  
Senior Member
 
CliftonGK1's Avatar
 
Join Date: Jul 2006
Location: Columbus, OH
Posts: 11,375

Bikes: '08 Surly Cross-Check, 2011 Redline Conquest Pro, 2012 Spesh FSR Comp EVO, 2015 Trek Domane 6.2 disc

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 7 Times in 6 Posts
I'm 6'6". My dad (who owned the bike previous to me) is 6'1", so I think a 58 should work for you.
__________________
"I feel like my world was classier before I found cyclocross."
- Mandi M.
CliftonGK1 is offline  
Old 09-06-07, 09:10 PM
  #12  
Senior Member
 
Join Date: Mar 2007
Location: Reston, VA
Posts: 2,369

Bikes: 2003 Giant OCR2

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Formulas don't work really well.

Here's the site I like: https://spokesetc.com/page.cfm?pageID=35

Doesn't give formulas, but it gives a step-by-step guide to getting htings set up correctly. Within reason, you can always get the seat set up right (unless the frame is waaaay too small and you don't have enough post in the tube). The question then is what kind of a stem you'd have to get to have good posture for the frame you have. If it's too awkward, a new frame could be better.

Getting the right frame depends on the relative lengths of your arms, legs, torso, etc. You defininitely can't use those guides that have you measure your inseam and guess your size if you want an optimal fit. If you've put 3000 miles on your current ride the fit can't be *too* horrible (is it?), and I don't imagine any table or formula will get you closer.
Mr. Underbridge is offline  
Old 09-06-07, 09:20 PM
  #13  
that bike nut
 
BikingGrad80's Avatar
 
Join Date: Jul 2007
Location: Chicago north
Posts: 939

Bikes: 2010 Motobecane Immortal Force 90' Trek 1400; 90' Trek 850; 06' Trek 520; 01 Iron Horse Victory

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 25 Post(s)
Likes: 0
Liked 3 Times in 2 Posts
Originally Posted by CliftonGK1
I'm 6'6". My dad (who owned the bike previous to me) is 6'1", so I think a 58 should work for you.
Hmm I'm 5'11" and I ride 58 cm road bikes. My 06 Trek 520 my old 90 trek 1400 that I commute on and my good Iron Horse Victory road bike are all 58's.
They all fit, all be it differently. The two Treks give me a comfy slightly more upright posture. The IHV has a 1cm longer top tube and a 130 stem so I have a lower stretched out position, a bit more aggressive.
BikingGrad80 is offline  
Old 09-06-07, 09:27 PM
  #14  
Senior Member
 
Join Date: Feb 2007
Location: San Francisco!
Posts: 909

Bikes: 2010 Surly LHT (main rider and do-everything bike), 2011 Bike Friday NWT (back-up bike and multi-modal)

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Frame sizing formulas will not give you an exact frame size, because one bike company's 54cm is another's 56cm, or 55cm for a third company (I'm 5'9" with a 32.5" inseam, and I usually end up riding 54-55cm frames, but with the sizing some companies use, I end up riding 52-53cm's instead). All the formulas are good for is getting you into the ballpark that you should be looking into. The best way to determine size is to get fitted in person with a professional or at your LBS.
fat_bike_nut is offline  
Old 09-06-07, 10:57 PM
  #15  
Full Member
Thread Starter
 
Join Date: Jul 2006
Posts: 461
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 14 Post(s)
Likes: 0
Liked 4 Times in 3 Posts
Thanks for all the advice!

I don't have any pains that I can't attribute to simpler changes. I have some knee pain at the moment but thats only developed in the past month and I'm fairly certain that I need to adjust my shoes. (I've played a ton of soccer and my feet turn outward more than is healthy when cycling. but i'll figure it out in time) My ass gets a bit sore but thats probably a seat problem and completely common with all cyclists.

I might stop by my LBS and see if they can sell me on a new bike but its much more likely that i'll order a ton of parts.

I got intimidated for a bit but I'm feeling much better know. I guess its just the growing pains of going from a novice to real cyclist. The pain is an honor - in the general population, how many people make it this far?
mattkime is offline  
Old 09-07-07, 05:54 AM
  #16  
put our Heads Together
 
cerewa's Avatar
 
Join Date: Jun 2003
Location: southeast pennsylvania
Posts: 3,155

Bikes: a mountain bike with a cargo box on the back and aero bars on the front. an old well-worn dahon folding bike

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
I might stop by my LBS and see if they can sell me on a new bike but its much more likely that i'll order a ton of parts.
A bunch of parts may cost more than a new bike, and if you buy a bike you get all the parts you didn't need , which can be sold or kept for when you do need them. Just something to consider.
cerewa is offline  
Old 09-07-07, 06:18 AM
  #17  
Senior Member
 
adrien's Avatar
 
Join Date: Aug 2006
Location: Alexandria, VA
Posts: 1,210

Bikes: Firefly custom Road, Ira Ryan custom road bike, Ira Ryan custom fixed gear

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by BikingGrad80
Hmm I'm 5'11" and I ride 58 cm road bikes. My 06 Trek 520 my old 90 trek 1400 that I commute on and my good Iron Horse Victory road bike are all 58's.
They all fit, all be it differently. The two Treks give me a comfy slightly more upright posture. The IHV has a 1cm longer top tube and a 130 stem so I have a lower stretched out position, a bit more aggressive.
I'm 6'3, but with long arms and shorter legs. I'd ride a 61 or 62 on a roadie...but ride a 58 in cross (Kona JTS).

Keep in mind that some bikes have higher bottom brackets, so the top tube length is the more important measure. If you're going to be slowing down and coming off the bike a lot (as in traffic lights, etc.) it's also really important to have clearance for the boys when you drop off the seat and clip out to put a foot down.

Comfort is key. I've done metrics on the JTS in about 4 hours flat, with no pain or other issues. It feels a tad cramped when i stand to push up a hill, but that won't lead me to change the frame -- only perhaps go for a slightly longer stem.

Do you get any pain when you ride?
adrien is offline  
Old 09-07-07, 08:36 AM
  #18  
Senior Member
 
Join Date: May 2007
Location: Zionsville, IN
Posts: 103

Bikes: Fugi Allegro (retired, cracked frame), Sears 3-Speed, Trek 720, Raliegh Technium E-bike

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Here has been my experience with fit. I bairly clear the bar standing over my old Fugi touring commuter . I have been playing with fit all over and maybe this bike is just to big for me. I am 6 feet tall, but have a 30 inseam, so short legs, tall torso. The bike is big, 60+, but I really like it. Upgrading to 44 handlebar, my sholders are broad, seemed to help shoulder pain, going with Look pedals, rather than SPD, has helped foot pain. Now it is the lower back and neck that are sore the day after. Currently the seat sems correct and I have the bars a bit lower than the seat, maybe an inch. During my 24mile commute I move between hoods, drops, and top of bars. My arms are bent, I feel comforatable while riding, I have had mixed success trying to find the perfect fit. I can say do one adjustment at a time, and make them fairly small. There does come a point when you wonder if the frame is just too big or small. Good luck.
Bikingtoteach is offline  
Old 09-07-07, 10:24 AM
  #19  
5' 19"
 
barndoor's Avatar
 
Join Date: Jun 2005
Location: Maryland
Posts: 829
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
I'm 6'7" and I've found over years of experimenting that the top tube length is most important to me for getting the correct size frame. I've actually ridden a 59cm framed bike for an extended length of time with no pain anywhere....but it had a 60cm top tube! Right now all of my bikes are in the 64-66cm seat tube length and 60-65cm top tube length and they all fit me superbly.

My .02 worth? "standover" height should leave you about 1" for safety's sake , and your top tube length should be long enough to keep you comfortably stretched out, but not "reaching" too far....you'll know if you are.....
__________________
I own my dream bike, a 2023 DirtySixer MkII 3xl


...and also a 2006 R-14 66cm Waterford road bike, my former dream bike :)







barndoor is offline  
Old 09-10-07, 11:45 AM
  #20  
Senior Member
 
Join Date: Nov 2006
Location: Hammonton, NJ
Posts: 1,050

Bikes: Dawes Lightning sport, Trek 1220, Trek 7100

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 22 Post(s)
Liked 15 Times in 8 Posts
Originally Posted by chephy
There are no real formulas to calculate correct frame size. I'm currently riding a frame that is "supposed" to be too big for me. I tried out lots of frames that were supposed to be right, and they all felt too small. See Peter White's page on bike fit; I agree with what he say: it's all about your unique body geometry, and your unique preferences and comfort.

If you are comfortable riding your current frame, then it's fine. But if you're feeling cramped and adjustments (stem etc.) don't help - get a new one.
here is my experience... I bought a bike a year ago based on the sizing recommendations off of ebay...
the bike is nice but I extended the stem (because I like a more upright riding style than the default) and have enjoyed the bike for a year... about 2 months ago, I purchased a used trek 1220 that was too big for me (based on a comment by my LBS...). I did have to shorten up the stem and I did also extend it as well but I have enjoyed riding that bike... I recently went back to the original bike and took it for a spin... boy did the setup seem "cramped" and I seemed to have more weight on my hands so they got numb, etc...

so, based on that, I agree with you...
e0richt is offline  
Old 09-10-07, 01:44 PM
  #21  
Enjoy
 
Join Date: Nov 2003
Location: Seattle metro
Posts: 6,165

Bikes: Trek 5200

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
I bought the recommended size from Trek and the frame ended up too small. Like others, I raised the seat, and handlebars. It's an OK ride, but when making sharp turns, I have to clip-out otherwise my foot hits the fender.
vrkelley is offline  
Old 09-10-07, 02:43 PM
  #22  
Retro-nerd
 
georgiaboy's Avatar
 
Join Date: Mar 2005
Location: Morningside - Atlanta
Posts: 1,638

Bikes: 1991 Serotta Colorado II, 1986 Vitus 979, 1971 Juene Classic, 2008 Surly Crosscheck, 1956 Riva Sport

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 30 Post(s)
Liked 57 Times in 39 Posts
Road bike - ride the biggest size you can stand over.

MTB - Stand over the top tube and pull up the front tire 2 inches.

Give or take.
__________________
Would you like a dream with that?
georgiaboy is offline  
Old 09-10-07, 03:14 PM
  #23  
Senior Member
 
madhouse's Avatar
 
Join Date: Sep 2004
Location: Podunc, Minnesota
Posts: 416

Bikes: '14 Bacchetta Corsa, '93 Ryan Vanguard, Action Bent SWB USS

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
I have a 58cm frame. I had to get a longer seat post to get proper leg extension. I had buyer’s remorse kicking myself because the bike was too small. Then I looked at the specs on the bike for various sizes and realized that the top tube length, stem length, were the same between the 58 and 62cm frames but the angles were different and after putting it on CAD it was clear that the reach on the 62cm frame was actually shorter than the 58cm frame!

Bottom line: Frame size is a starting point not an end all in bike fit.
madhouse is offline  
Old 09-10-07, 03:24 PM
  #24  
not a role model
 
JeffS's Avatar
 
Join Date: Oct 2006
Location: Portland, OR
Posts: 4,659
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time in 1 Post
I wouldn't want to be more than 2cm off of my "ideal" size.

I'm 6'4" and primarily look for bikes in the 62/63 range, although I've owned 60's. There's not much bigger than that so I don't have much choice.

Every now and then I see a custom "tall" bike, but they're generally MUCH bigger.
JeffS is offline  
Old 09-10-07, 06:44 PM
  #25  
Muscle bike design spec
 
robtown's Avatar
 
Join Date: Oct 2004
Location: Sterling VA
Posts: 3,688

Bikes: 70 Atala Record Proffesional, 00 Lemond, 08 Kestrel Evoke, 96 Colnago Master Olympic, 01 Colnago Ovalmaster, 76 Raleigh Gran Sport, 03 Fuji World, 86 Paramount, 90 Miyata CF, 09 Ritchey Breakaway CX, Bianchi Trofeo, 12 OutRiderUSA HyperLite

Mentioned: 1 Post(s)
Tagged: 1 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 3 Times in 3 Posts
I'm 6'2" with a 32" inseam (long torso). My bikes run to larger frame sizes. The smallest is 58cm with a longer stem. The biggest comfortable bike is 63cm with a 100mm stem. I built a 64cm frame up with a 120mm stem. It's big and the stretches me out some - but it has caused pain/numbness in my hands. If I keep the bike I'll have to substitute a stem/handlebar combination that is adjustable so I can shorten the reach and raise the bar level.
__________________
Korval is Ships
See my Hyperlite 411 it's the photo model on OutRiderUSA web page
robtown is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.