![]() |
Padding and sweat control are the main reasons I wear 'em. I don't drop the bike very often.
|
Originally Posted by I-Like-To-Bike
(Post 6746231)
Steavage asked about "cold" weather , not 0°C to 10°C, a downright heat wave in a Wisconsin winter.
Maybe all those worried about "saving" their hands, with a thin piece of cloth, from the alleged hand injury danger of bicycling, should lobby their LBS for magical Styrofoam gloves. In the meantime for those who are serious :rolleyes: about "saving" their hands from bicycling danger: http://www.tactical-store.com/ts-wx-gl-tag-1.html |
Originally Posted by nikirtehsuxlol
(Post 6746808)
I was going to buy fingerless gloves because my grips are rubber and my hand gets sweaty from GA humidity. The gloves would help, no?
|
Originally Posted by Torrilin
(Post 6746401)
I haven't experimented yet, but they're [Fingerless gloves] also supposedly helpful as a layer in very low temperatures. Think below -20 or -30C. Use them over or under a regular pair of gloves to get more insulation where it counts. (course, if it's *that* cold, I'll probably be cowering inside with my teapot :D)
|
Having hamburger for palms really isn't much fun. Seems like the only times I ever go down are those times when I decided not to wear gloves that day.
So for me, gloves seem to help with my balance for some unknown reason. ;) |
Originally Posted by Old Dirt Hill
(Post 6747493)
Having hamburger for palms really isn't much fun. Seems like the only times I ever go down are those times when I decided not to wear gloves that day.
So for me, gloves seem to help with my balance for some unknown reason. ;) Do you also wear a mouth guard, knee and elbow pads, steel toed shoes? Gotta protect those body parts, JUST IN CASE! Eh? Or why not full body armor; wouldn't it offer increased protection from nasty boo-boos? |
Originally Posted by I-Like-To-Bike
(Post 6747556)
Training wheels would offer superior protection from boo-boos and not just for your hands.
Do you also wear a mouth guard, knee and elbow pads, steel toed shoes? Gotta protect those body parts, JUST IN CASE! Eh? Or why not full body armor; wouldn't it offer increased protection from nasty boo-boos? http://www.fresno6.com/Air%20conditi...%20(Large).jpg |
pix
Originally Posted by Old Dirt Hill
(Post 6747601)
Well, here's a picture of me before my commute in this morning. After all, you can never be too prepared. :D
http://www.fresno6.com/Air%20conditi...%20(Large).jpg Where are your gloves? |
Originally Posted by tarwheel
(Post 6747616)
Where are your gloves?
|
They keep me from getting blisters on my hands.
(And I get those cool tan marks from the hole on top.) |
Originally Posted by SirGrant
(Post 6745952)
My friend ate it on his unicycle. He had some road rash all over but was wearing gloves. The gloves got all torn up but his hands were ok. If he hadn't been wearing them it would have just been another wound and he wouldn't be able to type (he is a engineer/programmer) so they saved his hands.
|
Originally Posted by I-Like-To-Bike
(Post 6747015)
Wearing fingerless gloves as an insulation layer over or under mittens/winter gloves makes as much sense as wearing crotchless long johns in cold weather.
|
Originally Posted by Tabor
(Post 6747817)
More importantly, you need your hands to tend to the wounds on the rest of your body. :lol:
|
I see most of the US posters are in the northern states... that's gotta make a difference!
For MTB I prefer 1/2 finger gloves for a few reasons: 1. they are cooler on hot days. 2. my stubby fingers don't fit well in most FF gloves. 3. I like to be able to feel the levers and I don't like the subtle sliding of material between my fingers and levers. To each, his/her own! |
Originally Posted by chipcom
(Post 6747881)
Why? Dogs don't have hands. :D
|
Originally Posted by I-Like-To-Bike
(Post 6746394)
IMHO you are correct, both items are about equal in capability for significant reduction of bicycling injury risk (i.e. severity x probability.)
|
Originally Posted by stevage
(Post 6745871)
At the risk of sounding like a troll, I'd like to start another "why" thread. I've never worn fingerless gloves to ride with, and wondered what's the advantage? Cushioning? Do you really get much benefit from a shortish commute, rather than mountain biking or maybe a long tour?
The only time I ever wear gloves is when it's cold, and then fingerless would be, um, dumb. :) Steve I wear whatever i want, regardless of what you think. That being said, carpenter gloves, full finger, all weather. I like to rub the fingers over the tires while riding if I accidentally rolled over some glass. |
You're not supposed to reach out with your hand to cushion your fall. That's a good way to break a wrist or collar bone. Tuck and roll.
I usually wear the half finger padded gloves if I'm riding my road bike with drop bars. Probably don't need them for my 5 mile commute, but I have them and don't feel like leaving them on the shelf at home. |
Originally Posted by squeakywheel
(Post 6748344)
You're not supposed to reach out with your hand to cushion your fall. That's a good way to break a wrist or collar bone. Tuck and roll.
|
I mostly commute, and I mostly wear fingerless gloves.
For short rides in nice wx, no gloves are ok. For almost any rides in cold wx (Minnesota winters), full gloves are mandatory for me. Fingerless I wear a lot for two reasons. First, the padding does help if I'm biking more than a few miles. As cdotbois points out, hard pavement and thin padding on the handlebars and you'll start to feel it pretty quick. Second, I use a grip shifter, and full gloves are kind of awkward to shift with (over- or under-clicking), so fingerless is the best compromise. |
Originally Posted by Tabor
(Post 6748364)
I agree 100%, but most people will still try to break their fall with their hands.
|
Originally Posted by huhenio
(Post 6748149)
I like to rub the fingers over the tires while riding if I accidentally rolled over some glass.
|
Originally Posted by squeakywheel
(Post 6748344)
You're not supposed to reach out with your hand to cushion your fall. That's a good way to break a wrist or collar bone. Tuck and roll.
I had a front brake malfunction (1968 style center pulls) where the brake arm snapped and jammed the wheel. It launched me directly into an unexpected superman maneuver over the drops and into a parking lot. Tuck and roll was not an option, but putting my hands out to protect my face was! I didn't have gloves. I eventually healed but it hurt pretty bad for a while, so I wear gloves now. I also find having the padding under my palms absorbs a bit of road vibration, and mine (the gloves...) have a soft fuzzy part that work well for wiping the sweat off my face on a hard ride/hot day. |
The cyclist tan. Fingerless gloves make it easier to fiddle with downtube shifters, do shoe laces, grab snacks or camera from jersey pocket, and dial cell phone.
|
Alright, I'll admit it. The main reason I wear fingerless gloves is so that I can pick my nose while riding.
Does that make me a bad person? |
| All times are GMT -6. The time now is 10:23 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.