Go Back  Bike Forums > Bike Forums > Commuting
Reload this Page >

Worst tire to install?

Notices
Commuting Bicycle commuting is easier than you think, before you know it, you'll be hooked. Learn the tips, hints, equipment, safety requirements for safely riding your bike to work.

Worst tire to install?

Old 08-10-12, 08:37 PM
  #1  
Full Member
Thread Starter
 
WestMass's Avatar
 
Join Date: Aug 2011
Location: Western Massachusetts
Posts: 297

Bikes: 2020 Kona Rove ST, 2020 Kona Woo, 2013 Cannondale Caad 10 Rival, 2020 All-City Super Professional, 2023 Kona Honzo, 1991 Bridgestone CB-1

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Likes: 0
Liked 14 Times in 4 Posts
Worst tire to install?

Like most of you, I've been changing flat tires on my bikes for many years.

Based on a lot of recommendations (and the vocal haters) I figured I'd give schwalbe marathon plus's a try when they were the only reflective sidewall 700x25 at my LBS. Shop gave me $10 off because the guy said I'm in there a lot - so that was nice but unexpected.

I got home and pulled off my old, beat up tire, and threw on the marathon. Except it wasn't that easy. I spent about 35-40 minutes trying to get both beads hooked in before giving up. I went online and looked up the tire to make sure it didn't need some super deep rim or something - but by the numbers it was the correct tire for the rim.

Later in the evening I spent another 25 minutes and finally got the bead caught, but pinched my tube and popped it. I don't want to take the tire off and swap the tube because I'm terrified to put all that work in again. Do these get easier after already being on the rim??!

Yikes.

I can't imagine having to change a flat on the road with this beast.
WestMass is offline  
Old 08-10-12, 08:48 PM
  #2  
Senior Member
 
Join Date: Sep 2011
Location: Chicago, IL
Posts: 155

Bikes: Crossrip Elite, Bikesdirect tarck bike custom build

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Vittoria Randonneur Cross. Spent about a half hour trying to just get it onto the rim, but ultimately failed. The last 6 inches or so broke my (admittedly cheap nylon) tire levers!

I took it to the shop to put it on. Good thing, too, because I didn't have a flat for about 800 miles. I finally had to replace the tube after getting a quasi snakebite - I hit something so hard, from the full 70lb pressure, that the inside of the tube (facing the rim) was punctured, but the outside wasn't. Glad the flat was slow enough to limp home (I was doing some city-biking, so I had access to air at bike shops every few miles) - it took 30 minutes and a couple of nice gouges on my knuckles to get the tire off. I wouldn't want to do that when I was out.

Replaced it with a Conti SportContact. Didn't come in my preferred size (35mm, had to go 37mm, not a huge difference I know) but I'm liking the almost totally slick tread.
umazuki is offline  
Old 08-10-12, 09:05 PM
  #3  
Senior Member
 
alhedges's Avatar
 
Join Date: Mar 2008
Location: Naptown
Posts: 1,133

Bikes: NWT 24sp DD; Brompton M6R

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 3 Times in 1 Post
Try installing a marathon on a 16" rim :-(

It is easier after they've been on the rim, though. But I carry a "bead jack" with me just in case.

This one is the easiest to find:


It's the Koolstop bead jack from Amazon.

The VAR tire lever is a bead jack that is more portable than the Koolstop one, but it can be harder find in the US:

Attached Images
File Type: jpg
File Type: jpg
27539.jpg (11.0 KB, 11 views)
alhedges is offline  
Old 08-10-12, 09:22 PM
  #4  
Banned
 
dynodonn's Avatar
 
Join Date: Dec 2006
Location: U.S. of A.
Posts: 7,466
Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 1268 Post(s)
Liked 78 Times in 67 Posts
Michelin Pilot City, it may not be the worst of all time, but it was the worst tire that I ever had to install.
dynodonn is offline  
Old 08-10-12, 09:25 PM
  #5  
Senior Member
 
Join Date: Jan 2008
Posts: 588
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
My choice isn't based on difficulty to install, but on general crappiness.

The cheapest Bontrager Eco tire. Pure junk. Two in a row came unwound on me. One tore out on the sidewall, the other developed a huge bulge (broken belt) and let go before I could make it to the bike shop for another tire.

Junk.
SkippyX is offline  
Old 08-10-12, 10:00 PM
  #6  
Toffiest Multipiston
 
Cogsby11's Avatar
 
Join Date: Jun 2005
Posts: 25
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Worst combo of rim and tire I know of is Veloflex and Campagnolo. I used to love Veloflex Pave tires, but it would almost take two people to get them on.

I have three suggestions to make tire installation easier:

1 - Always completely deflate your tubes. Sometimes this is the only difference between breaking tire levers and being able to put a tire on with your bare hands.

2 - Install the tire so you finish at the valve stem (i.e. start at side of the rim opposite from the valve stem). This means you can pull the bead of the tire all the way to the full depth of the rim.

3. Slide your tire lever along the inside of the brake track rather than trying to lift the tire from under the bead.

Attached Images
File Type: jpg
Inside the brake track.jpg (77.7 KB, 43 views)
Cogsby11 is offline  
Old 08-10-12, 10:17 PM
  #7  
just ride
 
Join Date: Mar 2012
Location: North Idaho
Posts: 485

Bikes: '15 Scott Speedster 20

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by Cogsby11
Slide your tire lever along the inside of the brake track rather than trying to lift the tire from under the bead.
That is pure genius.

I too had a wrestling match when I got my first 23 tire, and it blew up in my face because of pinching. Two things: One, have your LBS install them the first time. Most tires are really tight before their initial stretching (that's what she said). They are really good at it and if it pinches, it's not your fault.

Two, once it is in position, before inflating, you need to take both sides of the wheel and roll the tire over a bit all the way around so you can see the rim tape and make sure there is no tube visible under that and the tire.
E.S. is offline  
Old 08-10-12, 10:22 PM
  #8  
Senior Member
 
SweetLou's Avatar
 
Join Date: Jul 2007
Posts: 2,114
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time in 1 Post
Originally Posted by Cogsby11
Worst combo of rim and tire I know of is Veloflex and Campagnolo.
Anything on a Campagnolo rim is a pain.
SweetLou is offline  
Old 08-10-12, 10:29 PM
  #9  
Banned.
 
Join Date: Jun 2012
Location: San Francisco Bay Area
Posts: 224
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Some basic tips that work for me:

* Steel core tire levers. Definitely worth the money;

* Talcum powder on the inner tube. Makes everything slide easier, and makes it harder for the bead to catch and pinch before inflation;

* Try installing the tires outside, in the sun. Lay the tires in the sun for about 20 minutes before mounting. I've found this helps make them pliable;

* And yes, the tires are always easier to mount the second time around.
Face Palm is offline  
Old 08-10-12, 10:51 PM
  #10  
Geck, wo ist mein Fahrrad
 
Rx Rider's Avatar
 
Join Date: Feb 2012
Location: Front Range
Posts: 715
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by umazuki
Vittoria Randonneur Cross. . .
OMG these are a pain, as in painful. I don't think they get easier.
Rx Rider is offline  
Old 08-10-12, 10:56 PM
  #11  
Senior Member
 
zonatandem's Avatar
 
Join Date: Dec 2003
Location: Tucson, AZ
Posts: 11,016

Bikes: Custom Zona c/f tandem + Scott Plasma single

Mentioned: 3 Post(s)
Tagged: 1 Thread(s)
Quoted: 77 Post(s)
Likes: 0
Liked 19 Times in 11 Posts
Buy tires with a (folding) Kevlar bead,not a wire bead.
Can get ours on our tandem on/off without the use of any tire tools.
zonatandem is offline  
Old 08-11-12, 12:17 AM
  #12  
Senior Member
 
Join Date: Jul 2006
Location: beantown
Posts: 943

Bikes: '89 Specialized Hardrock Fixed Gear Commuter; 1984? Dawes Atlantis

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 43 Post(s)
Liked 2 Times in 1 Post
Marathon Plus's on Sun RhynoLites and Sun CR-18 rims are tight.
I change mine out to the Marathon Winters every winter just to remind me. I've broken a couple of sets of cheap plastic levers, I now use the Lezyne Aluminum ones from VO. They are a bit short (you might want to wear gloves, but you can put as much pressure as you want on them without worrying about breakage - the downside, is that they scratch up the rim edge. I suspect the big steel lever from ParK would be easier, but still scratch up the rim.
randomgear is offline  
Old 08-11-12, 12:52 AM
  #13  
Bicycle Commuter
 
Bluish Green's Avatar
 
Join Date: May 2012
Location: Springfield, IL
Posts: 726
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time in 1 Post
I keep this in my flat repair pouch:



It has a steel core and is wrapped/coated in hard black plastic. It doubles as both a 15mm wrench for rear axle nuts and a nice tire lever. It is wider than my cheapie plastic tire levers and performs basically the same function, but it is unbreakable. The one thing it won't do is hook onto a spoke for the first step in tire removal (I keep 2 cheapie plastic levers with spoke hook ends too, for performing the first part of removing the tire). The plastic coating means no scratches on rim. As a wrench, it is shorter than my 15mm regular steel wrenches, but I like the angle when wrenching - it seems designed just for this task. So, it serves two purposes in the flat kit.

I've only had to use it once, but I like it and consider it a lifetime tool, like my Ortlieb panniers. It's one of those tools that is expensive, but perfect for my use and durable.


PDW 3wrencho: https://www.ridepdw.com/goods/tools/3...2%84%A2-coated
Bluish Green is offline  
Old 08-11-12, 01:10 AM
  #14  
Senior Member
 
kookaburra1701's Avatar
 
Join Date: Jul 2011
Location: Eugene, Oregon
Posts: 1,345

Bikes: 2014 Specialized Dolce Triple, 1987 Schwinn Tempo, 2012 Windsor Kensington 8

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
I found my Marathon Pluses way easier to install than Specialized Armadillos. The thing that made it work was really pushing the bead "down" onto the rim, not just pushing it in and thinking it will catch. I also use steel tire levers, the "blade" seems sharper and thinner, easier to get under the tire.
kookaburra1701 is offline  
Old 08-11-12, 07:38 AM
  #15  
Senior Member
 
1FJEF's Avatar
 
Join Date: Jun 2011
Location: Northern Mexico (Central Kalifornia)
Posts: 145
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Believe it or not, some Schwalbe cruiser tires! 26x2.125! Shove the tire all the way down into the center & two tire levers! They were actually undersized in every dimension.
1FJEF is offline  
Old 08-11-12, 07:55 AM
  #16  
Junior Member
 
Join Date: Jul 2012
Posts: 21
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
I had a tough time with a Continental Gator Skin a few weeks ago. In the end, I had a blister on my finger. I, amazingly, didn't pop the tube though I was sure that I had. I just hope the tube holds up for a while.
secndshft is offline  
Old 08-11-12, 08:21 AM
  #17  
Senior Member
 
Join Date: Oct 2005
Posts: 14,277
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 3 Times in 3 Posts
Vittoria Randonneur was my worst.
DataJunkie is offline  
Old 08-11-12, 11:21 AM
  #18  
Senior Member
 
devianb's Avatar
 
Join Date: Dec 2007
Location: Central Illinois
Posts: 868

Bikes: 2008 Dawes Haymaker 20XX Leader LD515 TotoCycling Road Bike

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 26 Post(s)
Likes: 0
Liked 28 Times in 18 Posts
I had the toughest time installing Continental Traffic 26 x 1.9 tires. The wire bead on those was impossibly tight. Takes me 5 minutes to change a tire, but took an hour to install just one of those.
devianb is offline  
Old 08-11-12, 03:21 PM
  #19  
working on my sandal tan
 
ThermionicScott's Avatar
 
Join Date: Aug 2011
Location: CID
Posts: 22,625

Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)

Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3868 Post(s)
Liked 2,560 Times in 1,574 Posts
The Schwalbe Marathons have a reputation. They inspired this video, if that tells you anything: https://www.youtube.com/watch?v=-XUFVrl0UT4

Originally Posted by Face Palm
* And yes, the tires are always easier to mount the second time around.
For that reason, I've heard that some folks will mount the tire without a tube first, just to stretch out the bead slightly, before installing it "for real."
__________________
Originally Posted by chandltp
There's no such thing as too far.. just lack of time
Originally Posted by noglider
People in this forum are not typical.
RUSA #7498
ThermionicScott is offline  
Old 08-11-12, 08:05 PM
  #20  
Senior Member
 
Join Date: Dec 2009
Posts: 771
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 2 Times in 1 Post
Dig this:

https://www.youtube.com/watch?v=-XUFVrl0UT4
lungimsam is offline  
Old 08-11-12, 08:37 PM
  #21  
Geck, wo ist mein Fahrrad
 
Rx Rider's Avatar
 
Join Date: Feb 2012
Location: Front Range
Posts: 715
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
^^^ah ha I knew it! @ 2:12 he says it doesn't matter where you start the second bead on the tyre. and he's got a British accent so you have to believe him. . .

. . .thx for that it was good to know.
Rx Rider is offline  
Old 08-12-12, 09:27 PM
  #22  
Senior Member
 
mike's Avatar
 
Join Date: Jul 2000
Location: Snowy midwest
Posts: 5,392
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 1 Time in 1 Post
The reality is that not all tires fit all rims even if they are "supposed to fit".

You can try soaping your tire and rim to get the tire on - with levers, of course. I use metal tire irons instead of plastic when the going gets tough.

Changing a tire isn't rocket science. Either it fits or it doesn't. If it takes you 25 minutes to get the tire on, then bring the tire to the LBS where you bought the tire and see if they can get it on for you. If not - pass and get a different tire. Ask yourself how would you like to do a flat repair on the road with that tire?" Bad enough when you are at the comforts of your home and well tooled shop.
mike is offline  
Old 08-12-12, 09:38 PM
  #23  
Senior Member
 
mike's Avatar
 
Join Date: Jul 2000
Location: Snowy midwest
Posts: 5,392
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 1 Time in 1 Post
Originally Posted by Rx Rider
^^^ah ha I knew it! @ 2:12 he says it doesn't matter where you start the second bead on the tyre. and he's got a British accent so you have to believe him. . .

. . .thx for that it was good to know.
Well, I thought the old-timer had some good advice. His use of toe straps to hold the seated part of the tire onto the rim was clever. Also he seated the bead into the rim as he was putting the tire on so that he could get some extra slack and then convince the tire to go onto the rim completely by hand without the use of a tire lever. That is pretty good. No soap, no tire levers - just patience and technique. Not bad.

Also worthy of note is that the British "Bicycle Repair Man" in the video also mentioned that the Marathon is a difficult IS A DIFFICULT tire to put onto the wheel. He explains why as well - because of the extra thick, wide, and non-flexible bead area on the tire.

The dude made sure to seat the valve stem to the back of the tire which is a detail I have seen others forget to do.

I didn't see him go around again and make sure the bead was seated into the rim flange. but I will assume that he was confident from doing it as he went along.

I dunno. You can Pooo Pooooo it, but I think the old school dude had some worthy technique and he obviously got the tire onto the rim!

Last edited by mike; 08-12-12 at 09:42 PM.
mike is offline  
Old 08-12-12, 10:42 PM
  #24  
bragi
 
bragi's Avatar
 
Join Date: Jun 2006
Location: seattle, WA
Posts: 2,911

Bikes: LHT

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 3 Times in 3 Posts
Originally Posted by WestMass
Like most of you, I've been changing flat tires on my bikes for many years.

Based on a lot of recommendations (and the vocal haters) I figured I'd give schwalbe marathon plus's a try when they were the only reflective sidewall 700x25 at my LBS. Shop gave me $10 off because the guy said I'm in there a lot - so that was nice but unexpected.

I got home and pulled off my old, beat up tire, and threw on the marathon. Except it wasn't that easy. I spent about 35-40 minutes trying to get both beads hooked in before giving up. I went online and looked up the tire to make sure it didn't need some super deep rim or something - but by the numbers it was the correct tire for the rim.

Later in the evening I spent another 25 minutes and finally got the bead caught, but pinched my tube and popped it. I don't want to take the tire off and swap the tube because I'm terrified to put all that work in again. Do these get easier after already being on the rim??!

Yikes.

I can't imagine having to change a flat on the road with this beast.
The Marathons are indeed hard to put on, but it gets easier with practice. When I originally put the tires on, it took me over an hour to do it. Now, on the rare occasions that I get a flat, it's pretty easy. Just make sure you use two tire levers instead of only one.
bragi is offline  
Old 08-13-12, 12:55 PM
  #25  
Member
 
babo's Avatar
 
Join Date: Jul 2008
Location: Canadia
Posts: 34

Bikes: Two red, one black, one blue

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Someone suggested soaping up the tire before installing. When I have a bead that I know should sit, but doesn't, I let a little air out of the tube, squirt some liquid hand soap between the rim and tire of the problem area and reinflate to the maximum recommended pressure. Nine times out of ten, the bead sits right away, the other one time out of ten, after a couple days of routine cycling, the bead eventually moves into place.
babo is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.