![]() |
Originally Posted by FenderTL5
(Post 15168249)
I'm in Nashville, so the conditions aren't extreme. My bike was purchased new in May, so the amount of grime is not extreme either. I was hoping for something that was spray on/rinse off. The thought of the engine degreaser came to mind. I need to clean my rear wheel as well so an aluminum wheel cleaning product may do the trick.
I have a couple of lubricants that I bought at the LBS, I'm set there. I just was looking for suggestions on the cleaning side. |
I keep thinking that it would be good to wax my bike to protect it from sand and salt, but I'm too lazy.
|
Originally Posted by gerv
(Post 15161802)
Might seem over the top, but if there's clean snow around, it'll do a decent job of cleaning salt debris off the bike. Little dab of WD40 for the derailleurs and top up the chain lube...
To each their own though. |
Originally Posted by murdockspencer
(Post 15160800)
I bought this stuff on Amazon called Finish Line Super Bike Wash. It was the best degreaser I've ever used for spray on, rinse off application. I thought it worked pretty well, and it won't hurt your paint.
I've used mineral spirits to clean chains. Those quick-attach chain cleaners with the internal brushes make the job easier, and more importantly, they seem to do a better job than not using one. I've read criticisms of them, but I like them. Don't use gasoline. It's too dangerous, and cheap alternatives are safer. |
I found that using degreasers and cleaning agents on my chain significantly reduced the mileage I would get out of it. Now all I do to clean the chain is add more lube (one drop per roller) and wipe off the excess. If I need to clean the cassette or cranksets, I remove the chain and use basic orange degreaser. You can get a big bottle of it for $4 at the hardware store.
Living in an area where there isn't much extreme winter weather, your cleaning regimen shouldn't be much different from the rest of the year. |
I use household products to clean off the finish and jyst use wd40 to move some of the crud, synthetic machine oil on the moving parts and cables, and some nice gooey motorcycle chain lube on thr chain. In winter I'd rather have an oily fhain yhan a rusty one. The bare metal/chrome surface rust annoys me thoughx Especially on v brakes.
|
Originally Posted by noglider
(Post 15168504)
Those quick-attach chain cleaners with the internal brushes make the job easier, and more importantly, they seem to do a better job than not using one. I've read criticisms of them, but I like them.
It appears that a trip to the local hardware or maybe an auto-parts store is in order for the weekend. I've been commuting daily since late May, only driving my car 4 times since then. I want to get into a regular maintenance routine with the bike. I'm amazed at just how much I've learned in this short amount of time, not just about the bike, about commuting, traffic, the roadway, and myself. This place has been an inspiration, for that i thank all of you. |
Originally Posted by FenderTL5
(Post 15168139)
So far there's only been one suggestion for a cleaning solution/product.
I'm still wondering what product to use to clean the chain ring/housing and chain itself prior to re-lubricating. I'm considering a trip to an auto-parts store for an engine degreaser or similar product. Again, any suggestions? |
fendertl5, I'm glad to hear all of that and glad to have you in this community. I'm learning, too, even though I'm a veteran of sorts.
|
avoid using water to clean it. once water gets into your housings it can freeze and prevent you from shifting.
|
I'll also chip in to the "leave it until it makes too much noise" camp. I clean my chain and rim if they're grinding. The derailleur I just kick until it decides to stop defying my will.
The dirt will keep until spring. |
| All times are GMT -6. The time now is 06:15 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.